超氧化物歧化酶模型化合物的合成, 表征和活性测定

合成了二(2-苯并咪唑亚甲基)胺(N3)及其四种全新的过渡金属的双核配合物。通过元素分析、红外光谱和紫外光谱对配体及配合物进行了结构表征,利用邻苯三酚自氧化法测定了四种模拟化合物催化超氧阴离子自由基歧化反应的活性。     

EFFECT OF CRYSTALLIZATION TEMPERATURE ON MCM-41 SYNTHESIS

在Ｎａ２ＯＳｉＯ２ＣＴＡＢＨ２Ｏ四元水热体系中系统地考察了晶化温度对中孔ＭＣＭ４１分子筛合成及其骨架结构的影响。实验结果表明，提高晶化温度虽然能明显加快晶化速率，缩短晶化时间，但同时样品的结晶度和中孔骨架结构的有序度却被迅速破坏。这些特点与传统沸石的合成过程完全不同，其原因主要是合成ＭＣＭ４ｌ时所用的模板剂及其在合成中所起的模板作用与传统沸石完全不同。相对低的晶化温度（如１００℃）有利于高质量和高热稳定性的中孔ＭＣＭ４ｌ分子筛的合成。     

纸张保存的化学

讨论了纸张保存过程中的某些化学问题,对纸张的酸性、酸性来源和纤维系酸催化水解以及影响纸张变质的其它因素进行了分析,评述了近年来在纸张脱酸、脱色和利用新的浆内施胶剂等方面研究取得的一些成果。     

碱分离-EDTA络合滴定法测定铝基钯催化剂中的氧化铝

采用碱分离-EDTA络合滴定法测定铝基钯催化剂中的氧化铝,考察了试样分解温度、EDTA的用量、煮沸时间、氟化钾用量、共存离子干扰等一系列条件对铝测定结果的影响。对标准样品定值的5个铝基钯催化剂的氧化铝进行测定,测定结果与参考值一致,测定范围是75%～95%,测定结果的相对标准偏差RSD(n=7)均小于1%。实验表明所拟定的铝基钯催化剂中铝的EDTA络合滴定法,测定结果准确可靠。     

General π‐Electron‐Assisted Strategy for Ir,Pt, Ru,Pd, Fe,Ni Single‐Atom Electrocatalysts with Bifunctional Active Sites for Highly Efficient Water Splitting

Both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are crucial to water splitting, but require alternative active sites. Now, a general π‐electron‐assisted strategy to anchor single‐atom sites (M=Ir, Pt, Ru, Pd, Fe, Ni) on a heterogeneous support is reported. The M atoms can simultaneously anchor on two distinct domains of the hybrid support, four‐fold N/C atoms (M@NC), and centers of Co octahedra (M@Co), which are expected to serve as bifunctional electrocatalysts towards the HER and the OER. The Ir catalyst exhibits the best water‐splitting performance, showing a low applied potential of 1.603 V to achieve 10 mA cm^?2 in 1.0 m KOH solution with cycling over 5 h. DFT calculations indicate that the Ir@Co (Ir) sites can accelerate the OER, while the Ir@NC₃ sites are responsible for the enhanced HER, clarifying the unprecedented performance of this bifunctional catalyst towards full water splitting.     

A Diffusion‐‐Reaction Competition Mechanism to Tailor Lithium Deposition for Lithium‐Metal Batteries

Lithium metal is recognized as one of the most promising anode materials owing to its ultrahigh theoretical specific capacity and low electrochemical potential. Nonetheless, dendritic Li growth has dramatically hindered the practical applications of Li metal anodes. Realizing spherical Li deposition is an effective approach to avoid Li dendrite growth, but the mechanism of spherical deposition is unknown. Herein, a diffusion‐reaction competition mechanism is proposed to reveal the rationale of different Li deposition morphologies. By controlling the rate‐determining step (diffusion or reaction) of Li deposition, various Li deposition scenarios are realized, in which the diffusion‐controlled process tends to lead to dendritic Li deposition while the reaction‐controlled process leads to spherical Li deposition. This study sheds fresh light on the dendrite‐free Li metal anode and guides to achieve safe batteries to benefit future wireless and fossil‐fuel‐free world.     

Surface‐Regulated Rhodium–Antimony Nanorods for Nitrogen Fixation

Surface regulation is an effective strategy to improve the performance of catalysts, but it has been rarely demonstrated for nitrogen reduction reaction (NRR) to date. Now, surface‐rough Rh₂Sb nanorod (RNR) and surface‐smooth Rh₂Sb NR (SNR) were selectively created, and their performance for NRR was investigated. The high‐index‐facet bounded Rh₂Sb RNRs/C exhibit a high NH₃ yield rate of 228.85±12.96 μg h^?1 mg^?1_Rh at ?0.45 V versus reversible hydrogen electrode (RHE), outperforming the Rh₂Sb SNRs/C (63.07±4.45 μg h^?1 mg^?1_Rh) and Rh nanoparticles/C (22.82±1.49 μg h^?1 mg^?1_Rh), owing to the enhanced adsorption and activation of N₂ on high‐index facets. Rh₂Sb RNRs/C also show durable stability with negligible activity decay after 10 h of successive electrolysis. The present work demonstrates that surface regulation plays an important role in promoting NRR activity and provides a new strategy for creating efficient NRR electrocatalysts.     

Direct Dynamic Evidence of Charge Separation in a Dye‐Sensitized Solar Cell Obtained under Operando Conditions by Raman Spectroscopy

Interfaces play an important role in enhancing the energy conversion performance of dye‐sensitized solar cells (DSCs). The interface effects have been studied by many techniques, but most of the studies only focused on one part of a DSC, rather than on a complete solar cell. Hence, monitoring the interface evolution of a DSC is still very challenging. Here, in situ/operando resonance Raman (RR) spectroscopic analyses were carried out to monitor the dynamics of the photovoltaic conversion processes in a DSC. We observed the creation of new species (i.e., polyiodide and iodine aggregates) in the photosensitization process. We also obtained molecular‐scale dynamic evidence that the bands from the C=C and C=N bonds of 2,2′‐bipyridyl (bpy), the S=C=N bonds of the NCS ligand, and photochemical products undergo reasonably strong intensity and frequency changes, which clearly demonstrates that they are involved in charge separation. Furthermore, RR spectroscopy can also be used to quickly evaluate the performance of DSCs.     

Oppositely Charged Ti3C2Tx MXene Membranes with 2D Nanofluidic Channels for Osmotic Energy Harvesting

Membrane‐based reverse electrodialysis (RED) is considered as the most promising technique to harvest osmotic energy. However, the traditional membranes are limited by high internal resistance and low efficiency, resulting in undesirable power densities. Herein, we report the combination of oppositely charged Ti₃C₂T_x MXene membranes (MXMs) with confined 2D nanofluidic channels as high‐performance osmotic power generators. The negatively or positively charged 2D MXene nanochannels exhibit typical surface‐charge‐governed ion transport and show excellent cation or anion selectivity. By mixing the artificial sea water (0.5 m NaCl) and river water (0.01 m NaCl), we obtain a maximum power density of ca. 4.6 Wm^?2, higher than most of the state‐of‐the‐art membrane‐based osmotic power generators, and very close to the commercialization benchmark (5 Wm^?2). Through connecting ten tandem MXM‐RED stacks, the output voltage can reach up 1.66 V, which can directly power the electronic devices.     

超声辅助快速合成4H-吡喃衍生物

采用浸渍法制备水滑石（LDH）负载路易斯酸催化剂,并通过傅里叶红外（FT-IR）、热重分析（TG）和扫描电子显微镜（SEM）对其结构进行分析。以芳香醛、丙二腈及苯甲酰乙腈为原料,LDH负载路易斯酸为催化剂,超声辅助快速合成4H-吡喃衍生物。采用单因素法研究了催化剂、溶剂、超声时间、原料摩尔比、催化剂用量、催化剂循环等对产率的影响。结果表明:超声辅助下,LDH/ZnCl₂催化5 min即可合成4H-吡喃衍生物(4a~4i),产率82.8%~98.2%;扩大原料用量至克级,4a产率94.6%,且催化剂循环5次仍保持较高的催化性能。