Thermodynamic properties of the ternary system {yNH4Cl + (1 − y)MgCl2} (aq) at 298.15 K

The mixture {yNH₄Cl + (1 − y)MgCl₂} (aq) has been studied using the hygrometric method at the temperature 298.15 K. The water activities are measured at total molalities from 0.30 mol kg⁻¹ up to saturation for different ionic strength fractions y of NH₄Cl with y = 0.20, 0.50 and 0.80. The obtained data allow the deduction of osmotic coefficients. Experimental results are compared with the calculations using the models of Zdanovskii–Stokes–Robinson, Kusik and Meissner, Robinson and Stokes, Lietzke and Stoughton, Reilly–Wood and Robinson and Pitzer. Thermodynamic properties have been modeled using the Pitzer ion-interaction model with inclusion of an ionic strength dependence of the third virial coefficient for the binary systems. From these measurements and the obtained binary parameters β⁽⁰⁾, β⁽¹⁾, C⁽⁰⁾ and C⁽¹⁾, the mixing ionic parameters θNH₄Mg${\theta }_{\text{N}{\text{H}}_4\text{Mg}}$ and ψNH₄MgCl${\psi }_{\text{N}{\text{H}}_4\text{MgCl}}$ are determined by the standard Pitzer model. The results show that a good accuracy is obtained with the standard Pitzer model using extended binary parameters. The parameters θNH₄Mg${\theta }_{\text{N}{\text{H}}_4\text{Mg}}$ and ψNH₄MgCl${\psi }_{\text{N}{\text{H}}_4\text{MgCl}}$ were used for evaluation of activity coefficients in the mixture. The excess Gibbs energy is also determined.     

The biologically important surfactin lipopeptide induces nanoripples in supported lipid bilayers

Under specific conditions, lipid membranes form ripple phases with intriguing nanoscale undulations. Here, we show using in situ atomic force microscopy (AFM) that the biologically important surfactin lipopeptide induces nanoripples of 30 nm periodicity in dipalmitoyl phosphatidylcholine (DPPC) bilayers at 25 degrees (i.e. well below the pretransition temperature of DPPC). Whereas most undulations formed the classical straight orientation with characteristic angle changes of 120 degrees , some of them also displayed unusual circular orientations. Strikingly, ripple structures were formed at 15% surfactin but were rarely or never observed at 5 and 30% surfactin, emphasizing the important role played by the surfactin concentration. Theoretical simulations corroborated the AFM data by revealing the formation of stable surfactin/lipid assemblies with positive curvature.     

Characterization by optical measurements of the effects of some stages of champagne technology on the adsorption layer formed at the gas/wine interface

This study analyzes the effects of some important factors of champagne technology on the ellipticity and Brewster angle microscopy (BAM) of the air/champagne interface in view of using the optical properties of the adsorption layer of base wine to forecast the stability of the champagne bubble collar. Using standard, ultrafiltered, and ultraconcentrated wines it was observed that champagne can lose amphiphilic macromolecules which adsorb on the inner glass wall of the bottle during storage, particles such as dead yeasts can adhere to the adsorption layer, a weak increase of the ethanol content during bottle fermentation can reduce significantly the ellipticity of the adsorption layer, and CO2 has no significant effect on the properties of that layer. Surprisingly, no visible differences of the adsorption layer were noticed between the experimental champagnes of the 2004 vintage of three vine varieties (Chardonnay, Pinot noir, and Pinot meunier). From analysis of all samples it is proposed that the mean value and standard deviation of the ellipticity measured during 30 min after pouring the wine in a Petri dish are physical quantities which satisfactorily characterize the adsorption layer of champagne. When needed, further characterization of the adsorption layer may be obtained by a detailed analysis of the kinetics of ellipticity during the same period and inspection of the BAM images of the interface.     

Influence of a surfactant and electrolytes on adsorbed polymer layers

Solvent relaxation NMR and small-angle neutron scattering have been used to characterize adsorbed poly(ethylene oxide) (PEO) layers on silica at a range of surfactant and electrolyte concentrations. Below the critical aggregation concentration (cac), the results suggest that sodium dodecyl sulfate (SDS) interacts relatively weakly, perhaps analogously to a simple salt reducing the solvency of PEO. This is evidenced by a decrease in the adsorbed layer thickness combined with an increase in the bound fraction, although the total adsorbed amount is not greatly affected. The layer thickness goes through a minimum at the cac, after which further SDS addition results in the formation of PEO/SDS aggregates that repel each other and, hence, tend to desorb. The adsorbed amount therefore decreases, from 0.7 mg m(-2) initially to 0.2 mg m(-2) with 32 mM SDS. The aggregates that remain adsorbed also repel, and hence, there is an increase in the layer thickness and the persistence length, while the bound fraction is reduced. In comparison, the effects of electrolyte at the ionic strength studied are relatively minimal. There is, however, evidence that the repulsions between adsorbed PEO/SDS aggregates are partially screened, allowing them to approach each other more readily. This leads to a contraction of the adsorbed layer when the SDS concentration is sufficiently high.     

Regioselective C-H Functionalization of the Six-Membered Ring of the 6,5-Fused Heterocyclic Systems: An Overview

The regioselective C-H functionalization of the five-membered ring of the 6,5-fused heterocyclic systems is nowadays well documented due to its high reactivity compared to the six-membered ring. So, developing new procedures of C-H functionalization of the six-membered ring “by thinking out of the box” is extremely challenging, which explains the limited number of reports published to date. This review paper aims to highlight advances achieved in this emerging chemistry research and discusses recently reported methods.     

Psychrotolerant Mesorhizobium sp. Isolated from Temperate and Cold Desert Regions Solubilizes Potassium and Produces Multiple Plant Growth Promoting Metabolites

Soil potassium (K) supplement depends intensively on the application of chemical fertilizers, which have substantial harmful environmental effects. However, some bacteria can act as inoculants by converting unavailable and insoluble K forms into plant-accessible forms. Such bacteria are an eco-friendly approach for enhancing plant K absorption and consequently reducing utilization of chemical fertilization. Therefore, the present research was undertaken to isolate, screen, and characterize the K solubilizing bacteria (KSB) from the rhizosphere soils of northern India. Overall, 110 strains were isolated, but only 13 isolates showed significant K solubilizing ability by forming a halo zone on solid media. They were further screened for K solubilizing activity at 0 °C, 1 °C, 3 °C, 5 °C, 7 °C, 15 °C, and 20 °C for 5, 10, and 20 days. All the bacterial isolates showed mineral K solubilization activity at these different temperatures. However, the content of K solubilization increased with the upsurge in temperature and period of incubation. The isolate KSB (Grz) showed the highest K solubilization index of 462.28% after 48 h of incubation at 20 °C. The maximum of 23.38 µg K/mL broth was solubilized by the isolate KSB (Grz) at 20 °C after 20 days of incubation. Based on morphological, biochemical, and molecular characterization (through the 16S rDNA approach), the isolate KSB (Grz) was identified as Mesorhizobium sp. The majority of the strains produced HCN and ammonia. The maximum indole acetic acid (IAA) (31.54 µM/mL) and cellulase (390 µM/mL) were produced by the isolate KSB (Grz). In contrast, the highest protease (525.12 µM/mL) and chitinase (5.20 µM/mL) activities were shown by standard strain Bacillus mucilaginosus and KSB (Gmr) isolate, respectively.     

Natural radioactivity and radon exhalation rates in building materials used in Egypt

Natural and fabricated building materials commonly used in Egypt were surveyed for both natural radionuclides content and radon exhalation rate. These include raw as well as construction products. Concentration of natural radionuclides in all samples were determined by γ-ray spectroscopy with HPGe detector. For Radon exhalation rate measurements of fabricated samples, the seal can-technique has been applied using CR-39 plastic track detectors. The radiation hazard indices of the total natural radioactivity in the studied samples were estimated. The results were compared with the corresponding results of different countries and were found to be lying within the average world values. Radon exhalation rate in the studied samples varied between 197 (cement brick) and 907 mBq m⁻² h⁻¹ (blast furnace slag cement). The results of this survey suggest that, using blast furnace slag cement for pre-coating the internal walls of buildings in the Urban region of Egypt is discouraged and the replacement of clay brick by cement brick will be more healthy for the public.     

Magnons localised on surface steps: a theoretical model

We present the solution of the full magnetic problem arising from the absence of magnetic translation symmetry in two dimensions due to an extended magnetic surface step on the surface boundary of an insulating magnetic substrate. The calculation concerns in particular the spin fluctuation dynamics of a magnetic atomic step in the surface of a ferromagnetic simple cubic lattice, the spin order being in the direction normal to surface boundary. Only exchange interactions are considered between the spins in the model. The theoretical approach determines the evanescent spin fluctuation field in the two dimensional plane normal to the direction of the step edge. This field arises owing to the absence of magnetic translation symmetry in this plane, and is completely independent of the form of the surface defect, underlying the general character of the calculation. We show the existence of optical localised magnon modes propagating along the step, their fields being evanescent in the plane normal to the step direction. Received 17 February 1999     

A study of primary nucleation of calcium oxalate monohydrate: I‐Effect of supersaturation

There are various organic and inorganic constituents in kidney stones. Among them, calcium oxalate monohydrate (COM) is the primary inorganic constituent of kidney stones. However, the mechanisms of formation of kidney stones are not well understood. In this regard, a basic study is carried out for better understanding of nucleation, crystal growth and/or aggregation of formed COM crystals. The primary nucleation of calcium oxalate monohydrate is studied at the laboratory scale using turbidity measurements. Calcium chloride and potassium oxalate solutions are mixed and then added to a Turbidimeter tube for continuous recording of turbidity. Induction time (time to induce formation of detectable crystals) is estimated from time‐turbidity graphs. The effect of some urinary species, such as oxalate and calcium, on nucleation and crystallization characteristics of COM is determined by particle size distribution analysis, measuring weight of crystals and calculation of relative supersaturation. The classical nucleation theory is applied at high supersaturation ratios (SR) ranging from 1.6 to 2.2. The results indicate that nucleation rate increases with increasing supersaturation ratio from 0.81 × 10²⁸ nuclei/cm³.sec at 1.6 SR, to 18.02 × 10²⁸ nuclei/cm³.sec at 2.2 SR. On the other hand, free energy change and radius of critical nucleus are decreased as supersaturation ratio is increased. The nucleation rates are higher than those reported in literature. Such discrepancy is discussed on the bases of differences in experimental techniques. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of gamma radiation on the absorption spectra and optical energy gap of Li‐ doped ZnO thin films

We have studied the effect of subsequent gamma (γ) irradiation on the absorption spectra and the optical energy gap of ZnO thin films doped with Li (ZnO:Li). The optical transmission (T) and optical reflection (R) in the wavelength range 190∼800 nm of films deposited at 300 °C on sapphire, MgO or quartz substrates were measured. The dependence of the absorption coefficient α on photon energy hν was determined as a function of γ‐doses. The films show direct allowed interband transition that influenced by the gamma doses. Both the optical energy gap E^opt_g and the absorption coefficient (α) were found to be γ‐dose dependent. The results can be discussed on the basis of γ‐irradiation‐induced defects in the film and on the film structure. The absorption coefficient exhibits exponential dependence on photon energy obeying Urbach's rule in the absorption edge. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)