Synthesis and characterization of Ge2Sb2Te5 nanowires with memory switching effect

Ge2Sb2Te5 nanowires (NWs) were synthesized by vaporizing GeTe, Sb, and Te precursors assisted by metal catalysts. Current-voltage measurement of the Ge2Sb2Te5 NW device displays fast and reversible switching between two distinct resistive states, which is due to the crystalline-amorphous phase transition nature of these materials     

Reduction potential tuning of the blue copper center in Pseudomonas aeruginosa azurin by the axial methionine as probed by unnatural amino acids

The conserved axial ligand methionine 121 from Pseudomonas aeruginosa azurin (Az) has been replaced by isostructural unnatural amino acid analogues, oxomethionine (OxM), difluoromethionine (DFM), trifluoromethionine (TFM), selenomethionine (SeM), and norleucine (Nle) using expressed protein ligation. The replacements resulted in < 6 nm shifts in the S(Cys)-Cu charge transfer (CT) band in the electronic absorption spectra and < 8 gauss changes in the copper hyperfine coupling constants (AII) in the X-band electron paramagnetic resonance spectra, suggesting that isostructural replacement of Met resulted in minimal structural perturbation of the copper center. The slight blue shifts of the CT band follow the trend of stronger electronegativity of the ligands. This trend is supported by 19F NMR studies of the fluorinated methionine analogues. However, the order of AII differs, suggesting additional factors influencing AII. In contrast to the small changes in the UV-vis and EPR spectra, a large variation of > 227 mV in reduction potential was observed for the series of variants reported here. Additionally, a linear correlation was established between the reduction potentials and hydrophobicity of the variants. Extension of this analysis to other type 1 copper-containing proteins reveals a linear correlation between change in hydrophobicity and change in reduction potential, independent of the protein scaffold, experimental conditions, measurement techniques, and steric modifications. This analysis has also revealed for the first time high and low potential states for type 1 centers, and the difference may be attributable to destabilization of the protein fold by disruption of hydrophobic or hydrogen bonding interactions that stabilize the type 1 center.     

On determining a 1-tailed upper limit for future sample HorRat values

Two formulas were developed for use in computing 1-tailed upper limits for future HorRat values obtained from the collaborative study of materials. One formula is applicable when a future sample HorRat value H [formula: see text] is computed based on a known concentration (e.g., C = spike level and RSD(R) is the sample relative reproducibility standard deviation) and the other formula is applicable when the true concentration (C) is unknown and a future sample HorRat value [formula: see text] is computed using the sample mean (e.g., y, the collaborative study overall mean for an analyte). A Monte Carlo simulation procedure was developed using the Statistical Analysis System (SAS) software to assess the accuracy of the 2 developed formulas. Based on the degree of closeness between the simulated and calculated limits, the formulas for computing upper limits for future sample HorRat values will prove to be useful to Study Directors in determining worst case scenarios concerning a method's reproducibility precision relative to that predicted using the "Horwitz equation". We also define the current empirical HorRat limits as 1-tailed 100p% upper limits to assess the statistical consequence, in a probability sense, of their application as an analytical methods screening tool.     

Silylene-spaced diphenylanthracene derivatives as blue-emitting materials

A novel series of blue emitting silylene-spaced diphenylanthracene derivatives have been synthesized and characterized. The rhodium-catalyzed hydrosilylation of bis[4-(dimethylsilyl)phenyl]anthracene 3-4 yielded stable 9,10-disubstituted (E)-divinylsilylene-diphenylanthracene products 7-10 and salt elimination reaction of bis[4-(chlorodimethylsilyl)phenyl]anthracene 5-6 gave 9,10-disubstituted disilyldiphenylanthracene compounds 11-14. They are fluorescent in the blue region with good quantum efficiencies. The rhodium-catalyzed polyaddition including 2-tert-butyl-9,10-bis[4-(dimethylsilyl)phenyl]anthracene (4) afforded the nonconjugated copolymer 15.     

Synthesis and styrene polymerization properties of dinuclear half-titanocene complexes with xylene linkage

The new dinuclear half-sandwich complexes of titanium with xylene bridge, [Ti(η⁵-cyclopentadienyl)Cl₂L]₂[CH₂-C₆H₄-CH₂] (L = Cl (3), L = O-2,6-iPr₂C₆H₃ (4), L = N(SiMe₃)(2,6-Me₂C₆H₃) (5)), have been synthesized. The complexes 4 and 5 have been prepared by the reaction of the complex 3 with the corresponding lithium salts of aryloxy and anilide. Structure of these complexes has been characterized by ¹H and ¹³C NMR. The change of substituent from chloride, 3, to anilide, 5, at titanium resulted in chemical shift change of cyclopentadienyl protons from 6.92 and 6.79 to 6.13 and 5.95 ppm probably due to the positive electron density delivery from the anilide group. It was found that all three half-titanocenes were effective catalyst for the generation of SPS (syndiotactic polystyrene). Xylene bridged dinuclear catalyst (4) with aryloxy substituent exhibited very high activity (458 kg of SPS/(mol of [Ti])h), at 40 °C, whereas the analogous hexamethylene bridged dinuclear half-titanocene catalyst (7) showed a lower activity (80.7 kg of SPS/(mol of [Ti])h) under the same conditions. While the catalyst 3 was the most active catalyst among three complexes less than 40 °C the catalyst 5 exhibited the highest activity at 70 °C. Xylene linkage was suggested to be too stiff to permit any kind of intramolecular interaction between two active centers. Lack of steric disturbance due to the rigidity of the xylene bridge might give rise to the similar properties of dinuclear metallocene to the corresponding mononuclear metallocene to result in not only the facile coordination of monomer at the active center to lead high activity but also the easier β-H elimination comparing to the dinuclear catalysts with the flexible bridge to result in the formation of lower molecular weight polymer.     

Formation of crystalline TiO2−xNx and its photocatalytic activity

Amorphous precursors to nitrogen-doped TiO₂ (NTP) and pure TiO₂ (ATP) powders were synthesized by hydrolytic synthesis and sol-gel method (SGM), respectively. Corresponding crystalline phases were obtained by thermally induced transformation of these amorphous powders. From FT-IR and XPS data, it was concluded that a complex containing titanium and ammonia was formed in the precipitate stage while calcination drove weakly adsorbed ammonium species off the surface, decomposed ammonia bound on surface of precipitated powder and led to substitution of nitrogen atom into the lattice of TiO₂ during the crystallization. The activation energies required for grain growth in amorphous TiO_2−xN_x and TiO₂ samples were determined to be 1.6 and 1.7 kJ/mol, respectively. Those required for the phase transformation from amorphous to crystalline TiO_2−xN_x and TiO₂ were determined to be 129 and 142 kJ/mol, respectively. A relatively low temperature was required for the phase transformation in NTP sample than in ATP sample. The fabricated N-doped TiO₂ photocatalyst absorbed the visible light showing two absorption edges; one in UV range due to titanium oxide as the main edge and the other due to nitrogen doping as a small shoulder. TiO_2−xN_x photocatalyst demonstrated its photoactivity for photocurrent generation and decomposition of 2-propanol (IPA) under visible light irradiation ().     

Palladium-catalyzed cross-coupling of trimethoxysilylbenzene with aryl bromides and chlorides using phosphite ligands

Phosphites were employed as ligands in palladium-catalyzed Hiyama coupling reactions. The optimized reaction conditions were equimolar amounts (5 mol % each) of Pd(acac)₂ and phosphite 1 in p-xylene at 80 °C with TBAF as an additive. This catalyst system exhibited high activities in the reactions with trimethoxysilylbenzene and aryl bromides that have electron-donating or electron-withdrawing groups. In the case of aryl chlorides, substrates possessing electron-withdrawing groups gave the coupled products in high yields.     

An efficient synthesis of cyclic urethanes from Boc-protected amino acids through a metal triflate-catalyzed intramolecular diazocarbonyl insertion reaction

A simple and efficient synthesis of cyclic urethanes and related oxazinanones 1a-l from diazoketones 3a-l is described. The transformation involves generation of carbenes by activation of diazo groups using metal triflates in intramolecular diazocarbonyl insertion reactions in high overall yields.     

Mg3Ir3Si8, ein neues Magnesium‐Iridium‐Silicid mit Tetraedern und gekappten Tetraedern aus Silicium‐Atomen

Mg₃Ir₃Si₈, a New Magnesium Iridium Silicide with Si₄ Tetrahedra and Si₁₂ Truncated Tetrahedra The ternary silicide Mg₃Ir₃Si₈ (cubic, a = 1221.4(1) pm, space group , 8 formula units per unit cell) was prepared by reaction of the elemental components in a sealed molybdenum container (1000 °C, 1 d, cooled with 100 °/h). The crystal structure was determined from single crystal data. Short distances in the three‐dimensional iridium silicon network indicate strong Ir‐Si‐bonding (d(Ir‐Si) = 240.5(2) and 245.6(1) pm). In addition, homonuclear bonding seems to be important, resulting in the formation of Si₄‐tetrahedra (d(Si‐Si) = 257(1) pm), and Mg centered Si₁₂‐polyhedra with the shape of truncated tetrahedra (d(Si‐Si) = 241(1) and 261.0(9) pm). Furthermore, Mg₄‐tetrahedra with Mg‐Mg‐distances of 355(2) pm are formed. The structure may be derived from the structure of the isotypic compounds Mg₅Pd₁₀Si₁₆ and Mg₅Pt₁₀Si₁₆ by adding a Mg siteset and subtracting a platinum metal siteset. It can be described by an expanded cubic “close” packing of MgIr₆‐octahedra in which Si₄‐tetrahedra reside in the octahedral holes while Mg₄‐tetrahedra and MgSi₁₂‐units occupy one half of the tetrahedral holes each.     

The dipolar route to naphtho[2,1‐c]isoxazoles from the baylis‐hillman adducts of 2‐alkynylbenzaldehydes

A new synthesis of 4‐carbomethoxynaphtho[2,1‐c]isoxazoles 4a‐d from methyl 3‐(alkynylphenyl)‐2‐nitromethyl‐2‐propenoates 2a‐d by the intramolecular nitrile oxide cycloaddition is described. The latter are readily obtained from 2‐alkynylbenzaldehydes through the Baylis‐Hillman adduct acetates 1a‐d followed by nucleophilic substitution of nitrite anion.