Brightness and decay time of Zn2SiO4:Mn phosphor particles with spherical shape and fine size

Green-light-emitting Zn₂SiO₄:Mn phosphor particles were synthesized by modified large-scale spray pyrolysis using a colloidal solution containing fumed silica particles. The particles had a fine size, filled morphology, spherical shape and non-aggregation characteristics even after post-treatment at 1150 °C. The luminescence characteristics of Zn₂SiO₄:Mn phosphor particles having spherical shape, such as brightness and decay time under VUV excitation light, were investigated as a function of Mn content. The luminescence intensity exhibits a maximum at 5 mol% Mn-doped powder. The decay time increases consistently with decreasing Mn content and more saturated color coordinates are obtained with the composition having 12 mol% Mn. As a consequence, the 10 mol% Mn-doped powder proved to provide a good combination of favorable luminance and acceptable decay time. The influence of post-treatment temperature on the decay time and photoluminescence characteristics of Zn₂SiO₄:Mn particles was also investigated. Particles post-treated at 1155 °C had the maximum photoluminescence intensity, which was identical to 113% that of the commercial product, and a comparable decay time of 5.8 ms. PACS 81.20.Rg; 78. 55.Hx; 78.40.Ha; 81.05.Hd; 81.40.Tv     

Electrochemical behavior of Li intercalation processes into a Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 cathode

Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ (X=0.17, 0.25, 0.33, 0.5) compounds are prepared by a simple combustion method. The Rietvelt analysis shows that these compounds could be classified as having the α-NaFeO₂ structure. The initial charge-discharge and irreversible capacity increases with the decrease of x in Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂. Indeed, Li[Ni_0.50Mn_0.50]O₂ compound shows relatively low initial discharge capacity of 200 mAh/g and large capacity loss during cycling, with Li[Ni_0.17Li_0.22Mn_0.61]O₂ and Li[Ni_0.25Li_0.17Mn₀.₅₈]O₂ compounds exhibit high initial discharge capacity over 245 mAh/g and stable cycle performance in the voltage range of 4.8 -2.0 V. On the other hand, XANES analysis shows that the oxidation state of Ni ion reversibly changes between Ni²⁺ and about Ni³⁺, while the oxidation state of Mn ion sustains Mn⁴⁺ during charge-discharge process. This result does not agree with the previously reported ‘electrochemistry model’ of Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂, in which Ni ion changes between Ni²⁺ and NI⁴⁺. Based on these results, we modified oxidation-state change of Mn and Ni ion during charge-discharge process.     

Hyers-Ulam-Rassias stability of homomorphisms in quasi-Banach algebras associated to the Pexiderized Cauchy functional equation

In this paper, we prove the Hyers-Ulam-Rassias stability of homomorphisms in quasi-Banach algebras associated to the Pexiderized Cauchy functional equation. This is applied to investigate homomorphisms between quasi-Banach algebras. The concept of Hyers-Ulam-Rassias stability originated from Th.M. Rassias' stability theorem that appeared in his paper [Th.M. Rassias, On the stability of the linear mapping in Banach spaces, Proc. Amer. Math. Soc. 72 (1978) 297-300].     

Emission and sputtering characteristics of Ne-Ar mixed gas glow discharge plasmas.

The emission characteristics of several Cu lines emitted from a Ne-Ar mixed gas glow discharge plasma were investigated. The addition of small amounts of Ar to a Ne plasma increases the sputtering rate of a Cu sample because Ar ions, which work as the impinging ions for cathode sputtering, are predominantly produced through Penning ionization collisions between Ne metastables and Ar atoms. Ar addition also elevates the number density of electrons in the plasma. These changes occurring in the Ne-Ar mixed gas plasma result in enhanced emission intensities of the Cu lines. The Cu II 270.10-nm and the Cu II 224.70-nm lines yield different intensity dependence on the Ar partial pressure added. This phenomenon is because these Cu II lines are excited principally through different charge transfer processes: collisions with Ne ions for the Cu II 270.10-nm line and collisions with Ar ions for the Cu II 224.70-nm line. The shape of sputtered craters in the Ne-Ar glow discharge plasma was measured. The depth resolution was improved when Ar was added to a Ne plasma because the crater bottoms were flatter with larger Ar partial pressures.     

Positive Schatten(-Herz) Class Toeplitz Operators on the Half-space

On the harmonic Bergman space of the half-space, we give characterizations for an arbitrary positive Toeplitz operator to be a Schatten (or Schatten-Herz) class operator in terms of averaging functions and Berezin transforms. Examples are provided to show that various results are sharp. This research was supported by KOSEF(R01-2003-000-10243-0).     

Angular and NiFe thickness dependence of exchange bias in IrMn/NiFe/IrMn thin film

Exchange biased IrMn/NiFe/IrMn thin films were studied as a function of NiFe thickness. In plane angular dependence of a resonance field distribution which is measured by FMR was analyzed as a combined effect of an unidirectional anisotropy and an uniaxial anisotropy. The unidirectional anisotropic field and the uniaxial anisotropic field were linearly varied with NiFe thickness while the films with a thicker NiFe layer do not follow the linear variation. Resonance field and linewidth variations were also analysed with NiFe thickness.     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006