Copolymerization of ethylene and 1-butene with highly active Ticl4/THF/Mgcl2, Ticl4/THF/Mgcl2/SiO2, and TiCl3.1/3AlCl3 catalysts

Highly active catalysts for copolymerization have been prepared by the precipitation of MgCl₂/ToCl₄ complex with or without high surface area silica. Copolymerization of ethylene and 1-butene has been tested by using the prepared catalysts at various concentrations of 1-butene. The catalytic activities are 20–80 kg/g Ti h. The rate of copolymerization is strongly affected by the addition of 1-butene. The decay rate of copolymerization is first order with respect to time. Analyses of copolymers with solvent extraction, DSC, IR, XRD, and NMR were performed. Ethylene reactivity ratio (k₁₁) for TiCl₄/MgCl₂/THF catalyst is calculated to be about 26 by NMR spectrum. © 1994 John Wiley & Sons, Inc.     

Pattern generation of biological ligands on a biodegradable poly(glycolic acid) film

The micropatterns of biological ligands (biotin and RGD peptides) were generated on a flat surface of biodegradable polymer, poly(glycolic acid) (PGA). The immobilization of biological ligands onto the surface of biodegradable polymers (especially aliphatic polyesters) is usually hampered by the absence of functionalizable groups on the polymer backbone. We demonstrate herein that PGA polymer films were modified by surface hydrolysis to introduce carboxylic acid groups on the film surfaces, which were subsequently used for patterning amine-terminated ligands by microcontact printing. Fluorescence microscopy was used to verify the pattern of biotin on the surface of the PGA films after complexation with fluorescein-conjugated streptavidin. In addition, the cellular micropatterns were obtained from micropatterns of RGD peptides on the surface-hydrolyzed PGA films.     

PHOTOSENSITIZATION OF PYRIMIDINE DIMER SPLITTING BY A COVALENTLY BOUND INDOLE

Abstract— Photosensitized pyrimidine dimer splitting characterizes the enzymatic process of DNA repair by the DNA photolyases. Possible pathways for the enzymatic reaction include photoinduced electron transfer to or from the dimer. To study the mechanistic photochemistry of splitting by a sensitizer representative of excited state electron donors, a compound in which an indole is covalently linked to a pyrimidine dimer has been synthesized. This compound allowed the quantitative measurement of the quantum efficiency of dimer splitting to be made without uncertainties resulting from lack of extensive preassociation of the unlinked dimer and sensitizer free in solution. Irradiation of the compound with light at wavelengths absorbed only by the indolyl group (approximately 280 nm) resulted in splitting of the attached dimer. The quantum yield of splitting of the linked system dissolved in N₂0-saturated aqueous solution was found to be 0.04 ± 0.01. The fluorescence typical of indoles was almost totally quenched by the attached dimer. A splitting mechanism in which an electron is efficiently transferred intramolecularly from photoexcited indole to ground state dimer has been formulated. The surprisingly low quantum yield of splitting has been attributed to inefficient splitting of the resulting dimer radical anion. Insights gained from this study have important mechanistic implications for the analogous reaction effected by the DNA photolyases.     

Determination of cadmium by atomic-fluorescence and atomic-absorption spectrophotometry

The adaptation of a conventional atomic-absorption/flameemission spectrophotometer to the measurement of atomic-fluorescence in an air-acetylene flame is described. The determination of cadmium on the same instrument by both atomic-fluorescence and absorption shows that, even with a rather simple and inefficient means of exciting and measuring fluorescence, results can be obtained which indicate that the fluorescence technique is considerably more sensitive than atomic-absorbance and is equally free from inter-element interference.     

Biomedical significance of endothelial cell specific growth factor, angiopoietin

Until recently, vascular endothelial growth factor (VEGF) was the only growth factor proven to be specific and critical for blood vessel formation. Other long-known factors, such as the fibroblast growth factors (FGFs), platelet-derived growth factor, or transforming growth factor-beta, had profound effects in endothelial cells. But such factors were nonspecific, in that they could act on many other cells, and it seemed unlikely that these growth factors would be effective targets for treatment of endothelial cell diseases. A recently discovered endothelial cell specific growth factor, angiopoietin, has greatly contributed to our understanding of the development, physiology, and pathology of endothelial cells (Davis et al., 1996; Yancopoulos et al., 2000). The recent studies that identified and characterized the physiological and pathological roles of angiopoietin have allowed us to widen and deepen our knowledge about blood vessel formation and vascular endothelial function. Therefore, in this review, we describe the biomedical significance of these endothelial cell growth factors, the angiopoietins, in the vascular system under normal and pathological states.     

Surface-initiated growth of poly d(A-T) by Taq DNA polymerase

In this paper, we report surface-initiated d(A-T) polymerization by Taq DNA polymerase as a method for constructing DNA-tethered surfaces using an enzyme. The enzymatic polymerization was conducted successfully via two steps: tethering of oligo d(A-T)s onto the surface presenting carboxylic acids by amide coupling and surface-initiated polymerization using Taq DNA polymerase. In this enzymatic polymerization process, the design and construction of carboxylic acid-presenting surfaces were found to be an important factor: DNA growth did not occur on the gold surface coated only with the self-assembled monolayer (SAM) of 16-mercaptohexadecanoic acid (MHDA), but effectively proceeded on the surfaces presenting mixed SAMs of MHDA and 1-pentadecanethiol. The coupling of oligo d(A-T)s and the subsequent DNA polymerization reaction were characterized by polarized infrared external reflectance spectroscopy, ellipsometry, X-ray photoelectron spectroscopy, and atomic force microscopy.     

Lithium isotope separation by chemical exchange with polymer-bound azacrown compounds

The chromatographic separation of lithium isotopes was investigated by chemical exchange with the recently synthesized polymer-bound dibenzo pyridino diamide azacrown (DBPDA) and reduced dibenzo pyridino diamide azacrown (RDBPDA). Column chromatography was employed for the determination of the effect of solvents and ligand conformation on the separation coefficients. The maximum separation coefficients, , for the DBPDA and RDBPDA at 20.0±0.02°C with acetonitrile as eluent, were found to be 0.034±0.002 and 0.035±0.002, respectively. The isotope separation coefficient and adsorption capability of the lithium ion on the DBPDA and RDBPDA were only slightly dependent on ligand structure, but strongly dependent on the solvent. DBPDA and RDBPDA appeared to have almost the same value for the isotope separation coefficient of lithium.     

Self-assembly between silver(I) and di- and tri-2-pyridines with flexible spacer: formation of discrete metallocycle versus coordination polymer

The self-assembly of metallosupramolecules from reactions of flexible 2-pyridyl ligands and silver salts is described. When 1,3-bis(2-pyridyl)propane (L1), tris[(2-pyridyl)methyl]methane (L2), and 1,3-bis(2-pyridyl)-2-tolylpropane (L3) are used in combination with silver ions, novel discrete metallocyclic complexes are formed in crystals. Moreover, the self-assembly of 1,3-bis(2-pyridyl)-2-phenylpropane (L4) with silver nitrate yields a coordination polymer. The examination of its solution shows that this coordination polymer is formed via the solution-based discrete metallocyclic species.     

A novel and efficient route to diarylmethanes catalyzed by nickel(II) ion on nanoporous carbon

Much improved catalytic carbon-carbon bond-forming reactions between aryl chlorides and Grignard reagents has been achieved using nickel(II) ion on nanoporous carbon.     

Testing shelled corn for aflatoxin, Part III: evaluating the performance of aflatoxin sampling plans

The effects of changes in sample size and/or sample acceptance level on the performance of aflatoxin sampling plans for shelled corn were investigated. Six sampling plans were evaluated for a range of sample sizes and sample acceptance levels. For a given sample size, decreasing the sample acceptance level decreases the percentage of lots accepted while increasing the percentage of lots rejected at all aflatoxin concentrations, and decreases the average aflatoxin concentration in lots accepted and lots rejected. For a given sample size where the sample acceptance level decreases relative to a fixed regulatory guideline, the number of false positives increases and the number of false negatives decreases. For a given sample size where the sample acceptance level increases relative to a fixed regulatory guideline, the number of false positives decreases and the number of false negatives increases. For a given sample acceptance level, increasing the sample size increases the percentage of lots accepted at concentrations below the regulatory guideline while increasing the percentage of lots rejected at concentrations above the regulatory guideline, and decreases the average aflatoxin concentration in the lots accepted while increasing the average aflatoxin concentration in the rejected lots. For a given sample acceptance level that equals the regulatory guideline, increasing the sample size decreases misclassification of lots, both false positives and false negatives.