EPR and 1H and 13C dynamic nuclear polarization studies of a molecularly doped polymer: bisphenol A polycarbonate doped with trianisylamine and trianisylaminium perchlorate.

We have investigated the EPR and DNP behavior of a molecularly doped polymer modeling those used to transport electronic charge in electrophotography. The EPR spectra show no evidence of the superexchange reported for a closely related system based on tri-p-tolylamine. The difference may be due to larger charge-transfer matrix elements in the latter system. An unambiguous interpretation of the observed 1H DNP was rendered difficult by the unanticipated asymmetry of the EPR spectra. We report extensive data on the "three-spin" effect evident in the DNP-enhanced 13C NMR spectra, and comment on its potential for characterizing polymer interfaces.     

Upper limit for thermal direct photon production in heavy-ion collisions at 60 and 200A·GeV

The production of direct photons has been investigated in reactions ofp and¹⁶O projectiles at 60 and 200A·GeV with C and Au nuclei. Photon and ⁰ spectra have been measured in the pseudorapidity range 1.52.1 for the transverse momentum region 0.4 GeV/cp _T 2.8 GeV/c employing the lead-glass spectrometer SAPHIR. An upper limit of 15% at the 90% confidence level for the direct photon signal relative to the neutral pion production is obtained from the comparison of measured photon spectra with Monte Carlo simulations of the hadronic background based on the reconstructed yield of ⁰ and mesons. Consequences for a possible phase transition to a quark-gluon plasma are discussed.     

Synthesis and structure of FeRu3(CO)13(μ-PPh2)2; A “64-electron” cluster complex with a planar triangulated rhomboidal array of metal atoms

The species FeRu₃(CO)₁₃(μ-PPH₂)₂, synthesized from Ru₃(CO)₁₂ and Fe(CO)₄(Ph₂PPPh₂),has been characterized both spectroscopically and via a single-crystal X-ray structural analysis. This complex crystallizes in the centrosymmetric triclinic space group P$\text{1}$ [No. 2, C_i¹] with a  10.066(3), b  12.899(3), c  17.003(4) Å, α  111.89(2), β  91.02(2), γ  102.00(2)°, V  1992.7(9) ų, Z  2, ?(obsd)  1.79(2) g cm^-3 and ?(calcd)  1.82 cm^-3. Diffraction data were collected with a Syntex P2₁ automated four-circle diffractometer and the structure was refined to R_F  6.0% and R_WF  3.6% for all 5213 reflections (R_F  3.8%, R_WF  3.6% for those 4140 reflections with |F_o|> 3σ(|F_o|).The metal atoms define a planar triangulated rhombus, with atoms Ru(1) and Ru(2) at the bridgehead, and Fe(1) and Ru(3) at the acute apices. Fe(1) is linked to four terminal carbonyl ligands and is associated with the heteronuclear bonds Fe(1)Ru(1)  2.861(1) Å and Fe(1)Ru(2)  2.868(1) Å. The ruthenium atoms are each bonded to three terminal carbonyl groups. The retheniumruthenium distances are Ru(1)Ru(2)  3.098(1), Ru(1)Ru(3)  3.147(1), and Ru(2)Ru(3)  3.171(1) Å. The structure is completed by Ph₂P bridges across the Ru(1)Ru(3) and Ru(2)(ru(3) vectors (<Ru(1)P(1)Ru(3)  84.89(5)° and <Ru(2)P(2)Ru(3)  85.56(6)°).     

基于联合变换相关器的像移测量仿真分析

对基于联合变换相关器的像移测量数学原理进行了说明,介绍了面阵CCD的安装位置以及输入图像的获取方法,分析了低信噪比输入图像、相对转动位移对测量精度的影响。应用MATLAB对输入图像进行傅里叶变换得到联合功率谱,对二值化处理的功率谱进行傅里叶变换得到相关输出,用质量中心算法计算出像移量。分析得出,输入图像信噪比大于5dB,测量均方误差小于0.05像素;输入图像相对转动位移在0.1°的范围内,转动位移对测量精度和峰噪比的影响可以忽略不计。综合分析表明像移测量均方误差小于0.05像素。     

桑白皮中21种无机元素的测定及其质量评价

为准确了解不同产区桑白皮中多种元素分布及含量情况,用65%硝酸溶液对其样品进行微波消解处理,后采用电感耦合等离子体质谱（ICP-MS/MS）法测定桑白皮样品中21种元素的含量。得到21种元素的线性关系良好,R2 > 0.999,方法学考察试验的RSD均小于3%,加样回收率在91.32%~108.84%之间,RSD均小于4%;Al、Ga、Sr、Ba相比而言含量较大,且不同产区的特异性较明显;主成分分析中17批样品得到4个主成分,累计方差贡献率达 87.380%,确定V、Co、Al、Li、As、Se、Pb、U、Zn、Cr、Cd、Ga、Ba、Cs、Ni等15种元素为桑白皮药材的特征元素;相关性分析可知,元素间的相关性较强, P≤0.05的元素与主成分分析的特征元素基本一致。参照2020年版《中国药典》中对中药材中有害元素的限量规定,发现桑白皮样品中Pb、Cd、As、Cu有害元素的含量均未超过限量要求。ICP-MS/MS能准确快速测定桑白皮中21种元素含量情况,这对评价不同产区桑白皮质量,完善桑白皮质量标准具有一定参考价值。     

通讯波段单光子探测器的研制

将InGaAs/InP雪崩光电二极管应用于盖革模式下,采用门脉冲模式淬灭雪崩,并使用魔T混合网络抑制尖峰噪声,实现了通信波段1550 nm的单光子探测.在APD工作温度为223 K时,测得暗计数率与探测效率的比值为0.035.     

纵向焊接铝合金梁承载力研究

大多数结构用铝合金通常要经过热处理或加工硬化以得到更高的力学性能.这种合金焊接后,焊接热会使焊缝附近局部区域(称为热影响区HAZ)强度降低.这一特点使得焊接铝合金梁构件极限承载力的研究与焊接钢梁构件相比变得更为复杂.由于我国目前还没有关于铝合金结构的设计规范,为此本文对两种典型的纵向焊接工字型截面铝合金梁构件进行了试验研究,并在参考国外规范的基础上,提出了适用于静力设计的纵向焊接铝合金梁设计公式的建议.通过对试验构件进行数值分析,验证了有限元分析焊接梁的可靠性.在此基础上进行了大量的数值分析,并将试验结果及有限元计算结果与公式计算结果进行了比较,可以看出建议公式计算结果富有较大安全度,从而验证了其适用性,为我国《铝合金结构设计规范》的编制提供了依据和参考.