Spectroscopic investigation of arsenate and selenate incorporation into hydroxylapatite

The mechanism(s) of arsenate and selenate incorporation into hydroxylapatite (HAP) using extended X-ray absorption fine structure (EXAFS) spectroscopy was investigated for As- and Se-doped HAP samples with concentrations between 200 and 2500 ppm. EXAFS data on As and Se K-edges have shown similar local coordination environments and are similar to that of P in HAP, suggesting the substitution of arsenate or selenate tetrahedra on the phosphate sites. EXAFS best-fitting for As-doped samples shows that the first shell is fitted with approximately 4 O atoms at 1.68 Å, showing As(V) in tetrahedral coordination, and Se K-edge EXAFS data are characterized by the backscattering contributions an oxygen shell at 1.2 Å in the Fourier transform, which can be fit with 4 O atoms at 1.65 ± 0.01 Å. This is characteristic of Se–O distances in SeO₄ tetrahedron. These findings suggest that arsenate and selenate substitute for phosphate groups with local distortions during the incorporation of these metals into the structure of HAP.     

Vortex Pinning due to Dynamic Spin-Vortex Interaction in aSuperconductor/Ferromagnet Multilayer

We investigate the mutual interaction between superconductivity and ferromagnetism in a Nb/Ni81 Ee19 multilayer by ac susceptibility measurements. Compared with a pure superconducting Nb film, the critical current density of the multilayer is apparently enhanced in a low magnetic field region but remains nearly the same in high magnetic fields, which indicates that a continuous ferromagnetic layer with in-plane magnetization can produce strong vortex pinning in a low field region. We interpret this unusual vortex-pinning phenomenon as a consequence of dynamic spin vortex interaction which induces a spin rotation following vortex movement. In addition, we propose that this dynamic interaction could be used for spin manipulation via a superconductor.     

A new technique for the identification of ultrasonic flaw signals using deconvolution

The identification of ultrasonic flaw signals is a difficult task in the angle beam ultrasonic testing of welded joints due to the presence of non-relevant signals from the geometric reflectors such as weld-roots and counter-bores. This paper describes a new approach to identify ultrasonic flaw signals in such a problematic situation. A similarity function is defined as the deconvolution of a target signal by a reference signal. The similarity functions for the same type of flaws/references are symmetric bandlimited impulse-like patterns with larger amplitudes while those for different types of flaws/references are asymmetrical broad patterns with relatively smaller amplitudes. Therefore, ultrasonic signals could be identified by the pattern of the similarity function. In the initial experiments, the proposed technique showed great potential for identifying ultrasonic flaw signals in the inspection of weld joints.     

High temperature characteristics of ZnO-based MOS-FETs with a photochemical vapor deposition SiO2 gate dielectric

The authors report the fabrication of ZnO-based metal-oxide-semiconductor field effect transistors (MOSFETs) with a high quality SiO₂ gate dielectric by photochemical vapor deposition (photo-CVD) on a sapphire substrate. Compared with ZnO-based metal-semiconductor FETs (MESFETs), it was found that the gate leakage current was decreased to more than two orders of magnitude by inserting the photo-CVD SiO₂ gate dielectric between ZnO and gate metal. Besides, it was also found that the fabricated ZnO MOSFETs can achieve normal operation of FET, even operated at 150 °C. This could be attributed to the high quality of photo-CVD SiO₂ layer. With a 2 μm gate length, the saturated I_ds and maximum transconductance (G_m) were 61.1 mA/mm and 10.2 mS/mm for ZnO-based MOSFETs measured at room temperature, while 45.7 mA/mm and 7.67 mS/mm for that measured at 150 °C, respectively.     

Structure,transport and magnetic properties of the double perovskite (Ca<Subscript>2-2x</Subscript>Sr<Subscript>2x</Subscript>)FeMoO<Subscript>6</Subscript>

In this paper we report the results of a detailed investigation of the double perovskite (Ca_2-2xSr_2x)FeMoO₆ system. Chemical size effects on structural, electrical, and magnetic properties caused by the substitution of isovalent, larger Sr ions into the smaller Ca sites, resulting in (Ca_2-2xSr_2x)FeMoO₆, have been examined. The compounds crystallize in the monoclinic space group P2₁/n for 0.0x<0.2, the orthorhombic space group Pbnm for 0.2x<0.4, and the tetragonal space group I4/m and I4/mmm for x0.4. Examination of the resistivity of all compounds reveals a metallic behavior which is well described by a Tⁿ dependence except for x=1.0. These n values change from 1 to 2 as T decreases lower than T_c. This is indicative of a variation in the transport mechanism at T_c. The ferrimagnetic transition temperature T_c increases with increasing x from 318 (x=0.0) to 393 K (x=1.0). For all samples, the saturation magnetization at 82 K obeys M_s3.5_B/(formula unit), compared to a theoretical spin-only moment of 4_B/(formula unit) for a perfectly ordered compound. PACS 74.25.Fy; 74.25.Ha     

High-speed horizontal-path atmospheric turbulence correction with a large-actuator-number microelectromechanical system spatial light modulator in an interferometric phase-conjugation engine

Results of atmospheric propagation for a high-speed, large-actuator-number adaptive optics system are presented. The system uses a microelectromechanical system- (MEMS-) based spatial light modulator correction device with 1024 actuators. Tests over a 1.35-km path achieved correction speeds in excess of 800 Hz and Strehl ratios close to 0.5. The wave-front sensor was based on a quadrature interferometer that directly measures phase. This technique does not require global wave-front reconstruction, making it relatively insensitive to scintillation and phase residues. The results demonstrate the potential of large-actuator-number MEMS-based spatial light modulators to replace conventional deformable mirrors.     

Coherent backscattering spectroscopy

Coherent backscattering (CBS) of light in random media has been previously investigated by use of coherent light sources. Here we report a novel method of CBS measurement that combines low spatial coherence, broadband illumination, and spectrally resolved detection. We show that low spatial coherence illumination leads to an anomalously broad CBS peak and a dramatic speckle reduction; the latter is further facilitated by low temporal coherence detection. Thus CBS can be observed in biological tissue and other media that previously were beyond the reach of conventional CBS measurements. We also demonstrate, for the first time to our knowledge, spectroscopic analysis of CBS. CBS spectroscopy may find important applications in probing random media such as biological tissue in which depth-selective measurements are crucial.     

Monitoring Alfvén cascades with interferometry on the JET Tokamak

A microwave interferometry technique is applied for the first time for detecting a discrete spectrum of Alfvén cascade (AC) eigenmodes excited with fast ions in reversed magnetic shear plasmas of the Joint European Torus. The interferometry measurements of plasma density perturbations associated with ACs show an unprecedented frequency and time resolution superior to that obtained with external magnetic coils. The measurements of ACs are used for monitoring the evolution of the safety factor and density of rational magnetic surfaces in the region of maximum plasma current.