Abnormal adsorption behavior of dimethyl disulfide on gold surfaces

Adsorption of dimethyl disulfide (DMDS) on gold colloidal nanoparticle surfaces has been examined to check its binding mechanism. Differently from previous results, DMDS molecules adsorbed on the gold surface at high concentration showed the S–S stretching band at 500 cm⁻¹ in surface-enhanced Raman scattering (SERS) spectra, which indicates the presence of intact adsorption of DMDS molecules. However, it was found that the S–S bond of disulfides was easily cleaved on the gold surface at low concentration. These behaviors were not observed for diethyl disulfide (DEDS) or diphenyl disulfide (DPDS). Our results indicate that DMDS molecules with the shortest alkyl chains on the gold surface can be inserted into self-assembled monolayers (SAMs) without the S–S bond cleavage during self-assembly due to insufficient lateral van der Waals interaction and the low adsorption activity of disulfides, whereas DEDS with longer alkyl chains or DPDS with the weak disulfide bond dissociation energy would not. These unusual DMDS adsorption behaviors were examined by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). We also compared the bonding dissociation energy of the S–S bonds of various disulfides by means of a density functional theory (DFT) calculation.     

Unified Mie and fractal scattering by biological cells and subcellular structures

Angle-resolved light scattering spectroscopy of biological cells is investigated in the visible wavelength range. A unified Mie and fractal model is shown to provide an accurate global agreement with light scattering spectra from 1.1 degrees to 165 degrees scattering angles. It is found that light scattering in forward directions (<8 degrees ) is dominated by Mie scattering by the bare cell and nucleus, whereas light scattering at large angles (>20 degrees ) is determined by fractal scattering by subcellular structures. The findings are consistent with the results of experimental investigation of the contributions of different cellular components to light scattering by cells.     

Characterization of three-color CARS in a two-pulse broadband CARS spectrum

We demonstrate that a broadband coherent anti-Stokes Raman scattering (CARS) spectrum generated with a typical two-pulse scheme contains two distinct, significant signals: '2-color' CARS, where the pump and probe are provided by a narrowband pulse and the continuum pulse constitutes the Stokes light, and '3-color' CARS, where the pump and Stokes are provided by two different frequency components in the continuum pulse and the narrowband pulse serves as the probe. The CARS spectra from the two different mechanisms show distinct characteristics in Raman shift range, laser power dependence, and chirping dependence. We discuss the potential for a 3-color CARS signal to cover the fingerprint region with reduced photodamage of live cells. Official contribution of the National Institute of Standards and Technology; not subject to copyright in the United States.     

High-power and high-temperature THz quantum-cascade lasers based on lens-coupled metal-metal waveguides

A metal-metal waveguide quantum cascade laser with an abutted silicon hyperhemispherical lens is demonstrated at ~4.1 THz. The device produced 145 mW of peak pulsed power at 5 K with a wall-plug power efficiency of 0.7%, lasing up to a maximum operating temperature of 160 K. The far-field beam pattern has a full width at half-maximum value of ~4.8 degrees in the H plane. The same device produced ~26 mW of peak power using a Winston cone instead of a lens, lasing up to 165 K. The large increase in output power is mainly attributed to an increase in collection efficiency.     

Cavity linewidth narrowing and broadening due to competing linear and nonlinear dispersions

We experimentally demonstrate cavity linewidth control by manipulating dispersion of the intracavity medium. By making use of the dramatic change of Kerr nonlinearity near electromagnetically induced transparency resonance in a three-level atomic system, the cavity transmission linewidth can be greatly modified. As the cavity input intensity increases, the cavity linewidth changes from below to above empty cavity linewidth, corresponding to subluminal and superluminal photon propagation in the cavity, respectively.     

纳米氧化锌的过饱和控制生长与大小分布控制.

"在非水介质中合成了纳米氧化锌,测定了纳米氧化锌的紫外吸收光谱,并用有效质量模型计算了粒子大小,开发并命名了一种称之为纳米粒子过饱和控制生长的技术,该技术涉及将小的纳米粒子悬浊液加入到大的粒子悬浊液中,结果因为不同大小粒子间的溶解度差异小的粒子将全部溶解,大的粒子将整体长大,大粒子悬浊液的粒子数将保持不变,大粒子的生长速度显著比Ostwald老化的高．该技术最显著的特征是只要最初两悬浊液粒子大小的差异足够大,分布不是太宽,则粒子大小的分布将会因为粒子如此长大而变窄．"     

Highly stable,frequency-controlled mode-locked erbium fiber laser comb

A mode-locked Er:fiber laser-based optical frequency comb with high stability in the repetition frequency and carrier-envelope offset (CEO) frequency is realized. The CEO beat signal was detected right after the supercontinuum generation by a compact single-beam f–2f self-referencing interferometer, which does not require further delay compensation. The stabilized repetition frequency has an out-of-loop tracking stability of 1.3×10^-13/ for an integration time τ less than 1000 s, which is limited by the stability of the frequency measurement system. The stabilized CEO frequency has a residual fluctuation of 0.52 mHz measured with a 1 s gate time. This is, to our knowledge, the highest tracking stability realized for fiber laser-based optical frequency comb. PACS 06.30.Ft; 42.60.Lh; 42.55.Wd     

A computational quest for the effects of fused rings on the stability of Hammick carbenes type remote N‐heterocyclic carbenes

Substituent effects of fused six, and five‐membered aromatic rings are investigated on the stability, aromaticity, charge distribution, nucleophilic (N), and electrophilic (ω) characters of 20 singlet (s) and triplet (t) Hammick carbenes, at B3LYP/AUG‐cc‐pVTZ and M06‐2X/AUG‐cc‐pVTZ. Results display: (a) The higher thermodynamic and kinetic stability is revealed by carbenes situated between two nitrogen and/or two oxygen heteroatoms of two substituted rings, in a “W” arrangement toward the carbenic center; (b) Regardless of the arrangement, the order of thermodynamical and kinetic stabilization for fused rings is pyrrole > furan > thiophene > phosphole. (c) The substituted Hammick carbenes with two fused heterocyclics, in a given arrangement, show more stability than unsubstituted Hammick carbene; (d) While two five‐membered heterocyclic rings stabilize their corresponding substituted carbenes, two benzene rings destabilize Hammick carbene; (e) In all structures, s species emerges as ground state, exhibiting more stability than its t state; (f) The scrutinized s carbenes show higher N and lower ω than their corresponding t states.     

Carbazole‐based colorimetric and fluorescent probe for Cu2+ and its utility in bio‐imaging and real water samples

A new carbazole functionalized Schiff base CBM was synthesized and characterized. CBM can selectively recognize Cu²⁺ via UV–vis and fluorescence signal among common biologically relevant metal ions. When Cu²⁺ was added to CBM, there was a significant enhancement at the maximum absorption wavelength of 393 nm and with a distinct blue shift. The maximum emission peak was significantly attenuated by a factor of about 15 times at 535 nm and the blue shift of emission wavelength was observed. When other metal ions were added, there was no remarkable change at the maximum absorption and emission peak. Under the illumination of 365 nm ultraviolet lamp, the color of the CBM solution changed from light blue to dark blue after the addition of Cu²⁺. The combination mechanism of CBM with Cu²⁺ was nicely explored by density functional theory studies. The probe CBM has good cell permeability, fluorescence electron microscopy experiments show that CBM can be used as a fluorescent probe to detect the presence or absence of Cu²⁺ in Hela cells. Furthermore, the probe CBM can also be used for the detection of copper ions in actual water samples.     

Match statistics for sequence-based alleles in profiles from forensic PCR-mps kits

The first autosomal sequence-based allele (aka SNP-STR haplotype) frequency database for forensic massively parallel sequencing (MPS) has been published, thereby removing one of the remaining barriers to implementing MPS in casework. The database was developed using a specific set of flank trim sites. If different trim sites or different kits with different primers are used for casework, then SNP-STR haplotypes may be detected that do not have frequencies in the database. We describe a procedure to address calculation of match probabilities when casework samples are generated using an MPS kit with different trim sites than those present in the relevant population frequency database. The procedure provides a framework for comparison of any MPS kit or database combination while also accommodating comparison of MPS and CE profiles.