High performance Zn–Sn–O thin film transistors with Cu source/drain electrode

Zn–Sn–O (ZTO) thin film transistors (TFTs) were fabricated with a Cu source/drain electrode. Although a reasonably high mobility (μ_FE) of 13.2 cm²/Vs was obtained for the ZTO TFTs, the subthreshold gate swing (SS) and threshold voltage (V_th) of 1.1 V/decade and 9.1 V, respectively, were inferior. However, ZTO TFTs with Ta film inserted as a diffusion barrier, exhibited improved SS and V_th values of 0.48 V/decade and 3.0 V, respectively as well as a high μ_FE value of 18.7 cm²/Vs. The improvement in the Ta‐inserted device was attributed to the suppression of Cu lateral diffusion into the ZTO channel region. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and Characterization of Electroactive Anion‐Exchange Acrylic Polymer–Gold Composites

The characteristics and performance of an ionic polymer–metal composite (IPMC), prepared with an anion‐exchange acrylic copolymer, was examined. The acrylic copolymer was synthesized by the radical copolymerization of fluoroalkyl methacrylate and 2‐(dimethyl amino)ethyl methacrylate(AMA). Effects of the AMA repeating unit's content in the copolymer and effects of the anion type present on the actuation of the IPMC were observed. The optimal content of 19.4 wt% AMA in the IPMC copolymer yielded the best actuation. The actuation also improved according to the type of anion present in the composite, in the following order: Br^???4 ^?.     

High oxygen pressures and the stabilization of six-coordinated Ir(VI) in an oxygen lattice

Abstract

During these last twenty five years a great efforts have been made in the Laboratoire de Chimie du Solide du CNRS in order to develop high oxygen pressure for the stabilization of unusual oxidation state of transition elements.

The aims of such research works was to correlate the increase of the Mⁿ⁺-O bond covalency versus the increase of the oxidation state n+ to the physicochemical properties of resulting oxides [1].

Iridium was an interesting element due to its position (5d) in the Periodic Table. In 1980 Ir(V) (d⁴) was stabilized in La₂LiIrO₆ in the perovskite structure [2]. Such a study had underlined the strong value of the spin-orbit coupling associated to Ir(V) [3].

The stabilization of Ir(VI) is interesting from two points of view : (i) its isotropic electronic configuration (d³), (ii) such a high oxidation state could lead to the strongest M-O bond in an oxygen lattice.

Selecting, through a specific methodology, the most appropriate local structural and chemical factors and with the help of high oxygen pressure, Ir(V1) was stabilized in the perovskite Ba₂CaIrO₆. Structural, magnetic and Mössbauer studies have been carried out in order to characterize the physicochemical properties induced by this unusual oxidation state.     

15N/14N Analysis of Amino Acids with GC-C-IRMS - Methodical Investigations and Ecotoxicological Applications

Abstract

In order to perform the ¹⁵N/¹⁴N analysis of amino acids using a gas chromatograph and isotope ratio mass spectrometer linked up via a combustion interface (GC-C-IRMS), the amino acids must be derivatized. Tert-butyldimethylsilylation is examined using various techniques (direct conversion to nitrogen gas, ConFlo-IRMS [1], GC-C-IRMS [2]) and subsequently applied to isotopic characterization of amino acids from wheat protein hydrolyzate obtained from plants exposed to ozone. The method provides a reliable tool for studying ecotoxicological effects on plants at a molecular level in addition to the investigation of the natural variations of different N fractions.     

Dynamics of surface dipole and tripole solitons in nonlocal nonlinear media with optical lattice field

We find the existence conditions for stationary dipole and tripole surface solitons formed at the interface of a nonlocal nonlinear medium and a lattice with linearly modulated frequency. We investigate how the degree of nonlocality, the depth, and the modulation frequency of the optical lattice field affect on the existence of the surface solitons and their dynamics. The relationship between the power and the model parameters is identified. The stability of the surface dipole and tripole solitons is numerically investigated.     

Influence of SiNx:H film properties according to gas mixture ratios for crystalline silicon solar cells

The Hydrogenated silicon nitride (SiN_x:H) using plasma enhanced chemical vapor deposition is widely used in photovoltaic industry as an antireflection coating and passivation layer. In the high temperature firing process, the SiN_x:H film should not change the properties for its use as high quality surface layer in crystalline silicon solar cells. For optimizing surface layer in crystalline silicon solar cells, by varying gas mixture ratios (SiH₄ + NH₃ + N₂, SiH₄ + NH₃, SiH₄ + N₂), the hydrogenated silicon nitride films were analyzed for its antireflection and surface passivation (electrical and chemical) properties. The film deposited with the gas mixture of SiH₄ + NH₃ + N₂ showed the best properties in before and after firing process conditions.The single crystalline silicon solar cells fabricated according to optimized gas mixture condition (SiH₄ + NH₃ + N₂) on large area substrate of size 156 mm × 156 mm (Pseudo square) was found to have the conversion efficiency as high as 17.2%. The reason for the high efficiency using SiH₄ + NH₃ + N₂ is because of the good optical transmittance and passivation properties. Optimized hydrogenated silicon nitride surface layer and high efficiency crystalline silicon solar cells fabrication sequence has also been explained in this study.     

Significant decrease in interfacial energy of grain boundary through serrated grain boundary transition

The mechanism of serrated grain boundary formation and its effect on liquation behaviour have been studied in a wrought nickel-based superalloy – Alloy 263. It was newly discovered that grain boundaries are considerably serrated in the absence of γ?′-phase or M₂₃C₆ at the grain boundaries. An electron energy-loss spectroscopy study suggests that serration is triggered by the discontinuous segregation of C and Cr atoms at grain boundaries for the purpose of relieving the excessive elastic strain energy. The grain boundaries serrate to have specific segments approaching one {111} low-index plane at a boundary so that the interfacial free energy of the grain boundary can be decreased, which may be responsible for the driving force of the serration. The serrated grain boundaries effectively suppress grain coarsening and are highly resistant to liquation due to their lower wettability resulting from a lower interfacial energy of the grain boundary.     

Size-dependent chemical transformation,structural phase change,and optical properties of nanowires

Nanowires offer a unique approach for the bottom-up assembly of electronic and photonic devices with the potential of integrating photonics with existing technologies. The anisotropic geometry and mesoscopic length scales of nanowires also make them very interesting systems to study a variety of size-dependent phenomenon where finite-size effects become important. We will discuss the intriguing size-dependent properties of nanowire systems with diameters in the 5–300?nm range, where finite-size and interfacial phenomena become more important than quantum mechanical effects. The ability to synthesize and manipulate nanostructures by chemical methods allows tremendous versatility in creating new systems with well-controlled geometries, dimensions, and functionality, which can then be used for understanding novel processes in finite-sized systems and devices.     

Fouling Mitigation in a Heat Exchanger: High Cycles of Concentration for a Cooling-Tower Application

The purpose of the present study is to investigate the effect of a physical water treatment (PWT) technology on fouling mitigation in a simulated cooling tower operating at high cycles of concentration. Hard water was produced by evaporating pure water in a circulating open cooling tower, where dissolved calcium carbonate ions became concentrated with time. Heat transfer tests were conducted in a rectangular channel by varying the cycle of concentration (COC) from 5 to 10, and fouling resistances were measured over 270 hrs for each case with and without the PWT treatment. Another test was conducted with no blowdown case with and without the PWT treatment. The fouling resistance at 5 cycles with the PWT treatment was about 70% less than that in the case without the PWT treatment at the end of 270-hr tests. Even at 10 cycles, the PWT treatment reduced the fouling resistance by 60% from the value for the no treatment case. Thus, one can conclude that the PWT technology can help circulating cooling-tower water at relatively high COC for significant freshwater conservation, while keeping fouling resistances below industry standards.     

Acoustic behaviour and equation of state of amorphous ethylene–vinyl acetate copolymer studied by means of high-pressure Brillouin scattering spectroscopy

The determination of the equation of state (EOS) of amorphous materials is very important for fundamental understanding of the glass transition and applications as well. Simultaneous observation of both longitudinal and transverse acoustic modes by Brillouin scattering spectroscopy has been one of the major methods to obtain EOS of amorphous materials. However, the transverse acoustic mode is hardly seen from some of the amorphous polymers, which makes it difficult to derive EOS. The temperature and pressure dependences of the acoustic properties of amorphous ethylene–vinyl acetate (EVA) copolymer were measured by using high-pressure Brillouin scattering spectroscopy. The temperature variation induced large changes in the frequency shift and linewidth of the longitudinal acoustic mode due to strong coupling between the structural relaxation process and the propagating density fluctuations. The residual linewidth in the glassy state was attributed to the remnant intramolecular motions of EVA, the activation energy of which was estimated to be ～3.30 ± 0.27 kcal/mol. The pressure–density relationship of EVA could be obtained for the first time by measuring the refractive index and using the Lorentz–Lorenz equation. The density and the refractive index exhibited monotonic increase up to approximately 12 GPa. The strong reduction of the acoustic damping at low pressures below ～3 GPa was attributed to the collapsing free volume in EVA. The present study clearly shows that measuring the refractive index by high-pressure Brillouin spectroscopy may be an alternative method to get the EOS of polymeric materials whose transverse acoustic mode is too weak to be observed.