Simultaneous determination of trace uranium(VI) and zinc(II) by adsorptive cathodic stripping voltammetry with aluminon ligand

Uranium(VI) complexed with aluminon (3-[bis(3-carboxy-4-hydroxy-phenyl)methylene]-6-oxo-1,4-cyclohexadiene-1-carboxylic acid triammonium salt) was determined by adsorptive cathodic stripping voltammetry (ACSV) using a hanging mercury drop electrode. Trace uranium(VI) and zinc(II) can be simultaneously determined in a single scan in the presence of aluminon and urea. Optimal conditions were found to be: accumulation time; 180–200 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s⁻¹, supporting electrolyte; 0.1 M sodium acetate buffer at pH 6.5–7.0, and concentration of aluminon; 1×10⁻⁶ M. The linear range of uranium(VI) and zinc(II) were observed over the concentration range 2–33 and 30–120 ng ml⁻¹, respectively. The detection limit (S/N=3) are 0.2 ng ml⁻¹ (uranium) and 30 ng ml⁻¹ (zinc). A good reproducibility shows RSDs of 2.5–4.0% (n=10). The procedure offers high selectivity, with the presence of urea masking some metal ions.     

Residual stress and deformation during rapid cooling process in an epoxy plate

Residual stress in the epoxy plate during a rapid cooling process was measured by the layer removal method and calculated by the linear thermoviscoelastic theory considering specific volume relaxation. The relaxations of the tensile modulus and specific volume were measured by an Instron thermomechanical analyzer. When the starting temperature of the cooling process was near the glass transition temperature of the cured epoxy, the residual stress in the epoxy plate was smaller than when the starting temperature was higher than the glass transition temperature. However, the transient stress in the cured epoxy plate was higher when the starting temperature was near the glass transition temperature than when the starting temperature was higher than the glass transition temperature. The quenched epoxy plate was compressed in the direction parallel to the surface and expanded in the thickness direction.     

Two-dimensional carboxylate bridged network of europium(III)-transition metal(II) glutarate compounds

Four new heterometallic glutarate coordination polymers, [Eu2M(H2O)4][O2C(CH2)3CO2]4.2H2O (M = Mn (1), Fe (2), Co (3) and Ni (4)) have been obtained under hydrothermal synthesis. The single-crystal X-ray diffraction analyses showed that they have two-dimensional frameworks based on the linear polyhedral chains consisting of two nine-coordinated Eu(III)O9 and a six-coordinated M(II)O6. These 1-D MO6-Eu2O16 chains are cross-linked by glutarate ligands as an interchain pillared architecture, whose conformations vary depending upon the transition metals. The magnetic behavior of the compounds show a weak antiferromagnetic interaction, in which shielding of the 4f electrons by the outer shell electrons effectively precludes significant coupling interactions between the Eu-4f electrons and transition metal (M)-3d electrons.     

Cysteine carboxyl O-methylation of human placental 23 kDa protein

C-Terminal carboxyl methylation of a human placental 23 kDa protein catalyzed by membrane-associated methyltransferase has been investigated. The 23 kDa protein substrate methylated was partially purified by DEAE-Sephacel, hydroxyapatite and Sephadex G-100 gel filtration chromatographies. The substrate protein was eluted on Sephadex G-100 gel filtration chromatography as a protein of about 29 kDa. In the absence of Mg2+, the methylation was stimulated by guanine nucleotides (GTP, GDP and GTPgammaS), but in the presence of Mg2+, only GTPgammaS stimulated the methylation which was similar to the effect on the G25K/rhoGDI complex. AFC, an inhibitor of C-terminal carboxyl methylation, inhibited the methylation of human placental 23 kDa protein. These results suggests that the substrate is a small G protein different from the G25K and is methylated on C-terminal isoprenylated cysteine residue. This was also confirmed by vapor phase analysis. The methylated substrate protein was redistributed to membrane after in vitro methylation, suggesting that the methylation of this protein is important for the redistribution of the 23 kDa small G protein for its putative role in intracellular signaling.     

Stereochemistry and dynamic behavior of some synthetic “angular” profisetinidin tetraflavanoid derivatives

The structure and stereochemistry of four synthetic “angular” tetraflavanoid-condensed tannin derivatives are examined by high-resolution variable temperature ¹H NMR. spectroscopy, and hence correlated with their dynamic behavior. Three “angular” oligomers exist as stable rotational isomers at ambient temperatures, thus contrasting with the mobility about their interflavanoid bonds of most natural profisetinidin “trimeric” and “tetrameric” homologs. A “linear” tetraflavanoid analog results from one of these regioselectively controlled condensations.     

Identification of new urinary metabolites of trimeprazine in rats by gas chromatography-mass spectrometry.

The metabolites of trimeprazine were identified in urine of rats by gas chromatography-mass spectrometry. After the oral administration of trimeprazine, the urinary metabolites were extracted with diethyl ether before or after hydrolysis with beta-glucuronidase. The identified metabolites were N-demethyltrimeprazine,3-hydroxytrimeprazine,N-demethyl-3-++ +hydroxytrimeprazine and trimeprazine sulphoxide.     

Microwave-assisted solid-phase synthesis of pseudopeptides containing reduced amide bond

Procedures were developed for reducing the reaction time and improving the yield of reductive alkylation in solid phase pseudopeptide synthesis by utilizing microwave irradiation. We chose dipeptides containing the reduced amide bond ψ[CH₂NH] as a model system and optimized the microwave assisted reductive alkylation reaction in solid phase pseudopeptide synthesis using Fmoc chemistry. Under the optimized condition, the reductive alkylation reaction used for incorporating the reduced amide bond into the dipeptides was completed in only 8.5 min, whereas the normal reductive alkylation reaction required a total of 300 min. The purity and yield of the various dipeptides containing the reduced amide bond synthesized in this way are better than those achieved using the reductive alkylation method without microwave irradiation. We chose α helical peptides, which are known as a difficult sequence to synthesize, and incorporated the reduced amide bond by the microwave-assisted reductive alkylation reaction. We successfully synthesized pseudopeptides containing the reduced amide bond as a major product by using the novel microwave-assisted method, whereas the same products were obtained as a minor product when using the reductive alkylation method without microwave irradiation.     

The chemical behaviour of cobalt-stabilized carbenes having a trisubstituted silyl or germyl ligand. Stereospecific formation of benzoylsilanes from the reaction of organosilyl-cobalt tetracarbonyl derivatives with phenyllithium

We report the chemical behavior of cobalt-stabilized carbenes, R₃M(CO)₃CoC(OEt)R′, and their parent anions, R₃M(CO)₃CoC(O^?)R′, where M = Si or Ge. The anions where M = Si, R′ = Ph decompose thermally into the corresponding benzoylsilanes; when the silicon atom is chiral (R₃ = MePh-1-Np) optically active R₃SiCOPh is obtained with complete retention of configuration.     

Structure and dynamics of metallomacrocycles: recognition of zinc xylyl-bicyclam by an HIV coreceptor

As platforms for the design of metal-based therapeutic and diagnostic agents, macrocycles are rigid enough to provide strong metal binding sites and orient functional groups stereoselectively, yet flexible enough to accommodate structural changes required for induced-fit recognition of biological targets. We consider the recognition of the Zn(II) complex of the bis-tetraazamacrocycle xylyl-bicyclam, a potent anti-HIV agent, by the coreceptor CXCR4, a G-protein-coupled receptor used by HIV for membrane fusion and cell entry. NMR studies show that the macrocycles of Zn(II)(2)-xylyl-bicyclam perchlorate exist in aqueous solution as two major configurations, trans-I (nitrogen chirality R,S,R,S), and trans-III (S,S,R,R). Acetate addition induced a major structural change. X-ray crystallography shows that the acetate complex contains the unusual cis-V cyclam configuration (R,R,R,R and folded) with bidentate coordination of acetate to Zn(II) plus second-coordination-sphere double H-bond formation between diagonal NH protons on the opposite cyclam face and acetate carboxylate oxygens. Detailed 1D and 2D NMR studies show that the major configuration of Zn(II)(2)-xylyl-bicyclam acetate in aqueous solution is cis-V/trans-I. Molecular modeling shows that an analogous cis-V site can be formed when Zn(II)(2)-xylyl-bicyclam binds to CXCR4, involving the carboxylate groups of Asp262 (Zn(II) coordination) and Glu288 (double H-bonding). The second cyclam can adopt the trans-I (or trans-III) configuration with Zn(II) binding to Asp171. These interactions are consistent with the known structure-activity relationships for bicyclam anti-HIV activity and receptor mutation. Consideration of the anti-HIV activity of xylyl-bicyclam complexes of other metal ions suggests that affinity for carboxylates, configurational flexibility, and kinetic factors may all play roles in receptor recognition. For example, Pd(II) cyclam complexes interact only weakly with axial ligands and are inflexible and inactive, whereas Co(III) cyclams bind carboxylates strongly, are configurationally flexible, and yet have low activity. Our findings should aid the design of new generations of active macrocycles including highly specific chemokine receptor antagonists.     

XPS analysis of the effect of Pt addition to Pd catalysts for complete benzene oxidation

Pt-Pd bimetallic catalysts were prepared in order to develop and investigate catalysts having excellent activity and stability for benzene destruction. The effect of Pt addition to Pd catalysts is studied by XPS analysis. This revised version was published online in August 2006 with corrections to the Cover Date.