Selective liquid adsorption and structural properties of montmorillonite and its hexadecylpyridinium derivatives

Summary An X-ray diffraction method was used to study the structures of montmorillonites, the surfaces of which were covered to a systematically increasing extent with hexadecylpyridinium (HDP) cations. It was found that, depending on the degree of cover of the surface, the HDP cations form a mono- or bimolecular layer in the interlayer space. A detailed investigation was made of the selective sorption of binary mixtures on montmorillonite and on HDP-montmorillonites with different surface coverages. The adsorption excess isotherms were determined, as were the adsorption capacities from analysis of the isotherms, and also the equivalent specific surface areas.It was established that from benzene-n-heptane mixtures the benzene is adsorbed only on the external surface of montmorillonite, while in the case of organocomplexes it causes moderate disaggregation.From benzene, alcohols with different numbers of carbon atoms are also preferentially adsorbed on the internal surfaces of montmorillonite; with the rise in the number of carbon atoms, the extent of interlamellar adsorption decreases. In the case of HDP-montmorillonites in methanol-benzene mixtures, the adsorption capacity exhibits a monotonous increase with the degree of organopbility in the range under consideration. In the event of optimum organophility the disaggregation of the organocomplex is complete, and the equivalent specific surface area is 764-778 m² · g^–1. The swelling of the organocomplex, which can be characterized by X-ray diffraction measurement, is in close correlation with the interlamellar liquid adsorption. The results show modification of the surface of montmorillonite with HDP cations fundamentally determines the nature and extent of the selective liquid adsorption.

---

Zusammenfassung Die Struktur von mit Hexadecyl-pyridinium(HDP)-Kationen im systematisch gesteigerten Maße bedeckten Montmorilloniten wurde mit der Röntgendiffraktions-Methode untersucht. Es wurde festgestellt, daß die HDP-Kationen, von der Bedeckung der Oberfläche abhängend, im Schichtzwischenraum eine mono- bzw. bimolekulare Schicht bilden. Die selektive Sorption binärer Gemische wurde an Montmorilloniten und an HDP-Montmorilloniten verschiedener Bedeckung eingehend untersucht. Es wurden die Adsorptionsisothermen von Flüssigkeitsgemischen und aus deren Analyse die Adsorptionskapazitäten und die äquivalenten spezifischen Oberflächen bestimmt.Es wurde festgestellt, daß aus Benzol-n-Heptan-Gemischen das Benzol nur an der äußeren Montmorillonite-Oberfläche adsorbiert wird, während es bei Organokomplexen eine mäßige Desaggregation verursacht. Die Adsorption von Alkoholen verschiedener Kohlenstoffzahl aus Benzol erscheint auch an inneren Montmorillonit-Oberflächen bevorzugt; mit zunehmender Kohlenstoffzahl nimmt das Ausmaß der interlamellaren Adsorption ab. Bei HDP-Montmorilloniten zeigt die Adsorptionskapazität aus Methanol-Benzol-Gemischen mit zunehmender Organophilität im untersuchten Gebiet eine monotone Steigerung. Im Falle optimaler Organophilität ist die Desaggregation vollständig, die äquivalente spezifische Oberfläche beträgt 764-778 m²/g. Die durch Röntgenn-diffraktionsmessung charakterisierbare Quellung des Organokomplexes steht mit der interlamellaren Flüssig-keitsadsorption in engern Zusammenhang. Unsere Ergebnisse zeigen, daß Charakter und Ausmaß der selektiven Flüssigkeitsadsorption durch die Modifizierung der Montmorillonit-Oberfläche mit HDP-Kationen grundlegend verändert wird.

---

---

With 14 figures and 4 tables     

Direct conversion of N-methoxy-N-methylamides (Weinreb amides) to ketones via a nonclassical Wittig reaction

[reaction: see text] N-Methoxy-N-methylamides (Weinreb amides) are converted efficiently into ketones by reaction with alkylidenetriphenylphosphoranes and in situ hydrolysis of the product.     

Phase behavior and interfacial properties of nonadditive mixtures of Onsager rods

Within a second virial theory, we study bulk phase diagrams as well as the free planar isotropic-nematic interface of binary mixtures of nonadditive thin and thick hard rods. For species of the same type, the excluded volume is determined only by the dimensions of the particles, whereas for dissimilar ones it is taken to be larger or smaller than that, giving rise to a nonadditivity that can be positive or negative. We argue that such a nonadditivity can result from modeling of soft interactions as effective hard-core interactions. The nonadditivity enhances or reduces the fractionation at isotropic-nematic (IN) coexistence and may induce or suppress a demixing of the high-density nematic phase into two nematic phases of different composition (N(1) and N(2)), depending on whether the nonadditivity is positive or negative. The interfacial tension between coexisting isotropic and nematic phases shows an increase with increasing fractionation at the IN interface, and complete wetting of the IN(2) interface by the N(1) phase upon approach of the triple-point coexistence. In all explored cases bulk and interfacial properties of the nonadditive mixtures exhibit a striking and quite unexpected similarity with the properties of additive mixtures of different diameter ratio.     

Determination of oxidized and reduced glutathione, by capillary zone electrophoresis, in Brassica juncea plants treated with copper and cadmium

A rapid method of capillary zone electrophoresis is described to determine the oxidized (GSSG) and reduced (GSH) form of glutathione in plant tissue. In order to separate both analytes in a fused-silica capillary, the pH and composition of the electrolyte solution were optimized. The electrolyte composition was 100 mmol/L, borate 25 mmol/L Tris, and 0.2% w/v metaphosphoric acid (MPA), pH 8.2. Some instrumental conditions used to run the samples were hydrostatic injection for 30 s, 30 kV applied voltage, and UV detection (185 nm) at 25 degrees C. Linearity and useful range obtained for the calibration curves were optimum, with correlation coefficients about 0.999 in the 0-120 micromol/L range. The migration time was highly reproducible, less than 5 min being afforded to run a sample. Electrolyte buffer and samples required a careful pH control for optimal separation of both analytes. This aspect constitutes a critical analytical step when acids are used in the procedure for sample preparation. Simultaneous analysis of GSH and GSSG may provide a useful tool for comparative studies of plants in order to select those species with a potential capacity for detoxification from toxic elements or those appearing promising from phytoremediation for these elements.     

Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts

Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions performed in dioxane. The effects of halide and acid impurities on the reactions were also investigated. Recycling experiments on catalysts were carried out in order to evaluate Ti leaching and its effect on activity and selectivity.     

Enthalpies of formation of methoxybenzoic acids and their dependence on structure

The energy of combustion of 2,5-dimethoxybenzoic acid has been determined using a static bomb calorimeter. The vapor pressures of the compound have been measured over a 18 K temperature interval by the Knudsen effusion technique. Heat capacity measurements betweenT=270 K andT=338 K were carried out by DSC. From these experimental results the standard molar enthalpies of combustion, sublimation, and formation in the crystalline and gaseous state at the temperature 298.15 K have been derived. With this compound, the series of mono- and dimethoxy-benzoic acids have been completed. Their_f H _m ^o values were expressed by an additive relationship, taking into account the number of methoxy groups and the number of all 1,2 interactions: an accuracy of 3.3 kJ·mol^–1 was achieved. In an alternative approach the substituent effect of the methoxy groups was evaluated within the framework of isodesmic reactions. The effect of disubstitution was referred to mono derivatives and the excess energy—the so-called buttressing effect—was evaluated (2–24 kJ· mol^–1 for individual bis derivatives). These values were explained in terms of the conformation of the methoxy group around the C_ar-O bond.     

Analysis and toxicity of methomyl and ametryn after biodegradation

The controlled biodegradation of ametryn and methomyl has been performed, in accordance with the OECD Zahn-Wellens/EMPA procedure, by use of an enriched mixture of activated sludge collected from three domestic waste-water-treatment plants (WWTP). During the process concentrations of ametryn and methomyl in the water samples were isolated by solid-phase extraction (SPE); recovery rates were 98.9 and 93.2 for methomyl and ametryn, respectively. Liquid chromatography-mass spectrometry (LC-MS) was used to determine final pesticide concentrations and for metabolite identification.The efficiency of aerobic biodegradation of ametryn and methomyl was evaluated by measuring both the decrease in the concentration of the pesticides and global properties such as the chemical oxygen demand (COD). The acute toxicity of ametryn and methomyl was evaluated by use of the ToxAlert100 biological test, which is based on inhibition of the bioluminescence of Vibrio fischeri. There was significant correlation between results from primary and ultimate biodegradation and those from determination of toxicity. Pesticide concentrations were always reduced to below the limit of detection in less than 17 days. High COD removal (90-96%) was achieved in 28 and 18 days for methomyl and ametryn, respectively.     

Chronoamperometric stripping analysis following biocatalytic preconcentration

Electrodes containing glucose oxidase or xanthine oxidase adsorbed on modified glassy carbon electrodes or on conductive complexes, accumulate charge in the presence of substrates, the discharge of which gives the chronoamperometric stripping current. This current is 15 times higher than the stationary current after preconcentration for 8 min. A ten-fold increase in sensitivity of the determination of glucose or hypoxanthine is observed. The stripping current of electrodes based on cytochrome b₂ adsorbed on a graphite electrode is 25 times higher than the stationary current. The electrode is useful for lactate determinations for more than 7 days.     

Nachweis von Oxoverbindungen. IV

Zusammenfassung Enolisierende Oxoverbindungen, die eine - CH₂-CO- oder eine- CO-NH-NH-Gruppe enthalten, geben mit Diazoniumsalz eine Farbreaktion. Formaldehyd, Benzaldehyd, Nitrobenzaldehyde, Benzoin, Benzophenon usw. reagieren dabei nicht. 1,3-Diketone geben mit diazotiertem p-Nitroanilin zweierlei Färbungen, bei geringer Diazoniumsalzkonzentration eine rote, bei großem Überschuß eine blaue oder grüne Färbung. Die Reaktionsgeschwindigkeit ändert sich auch nach der Art des Diazoniumsalzes. Mit dieser Methode wurden selektive Nachweise für Oxoverbindungen ausgearbeitet. Acetonspuren können in Äthanol bzw. in Wasser oder in Methyläthylketon mit diazotiertem Anilin, 10^–3 % Acetessigsäureäthylester in Äthylacetat mit diazotiertem p-Phenetidin, 10^–5 % Acetylaceton in Aceton mit diazotiertem p-Nitroanilin, außerdem Acetaldehyd neben Formaldehyd, Acetylphenylhydrazin neben Acetanilid, mbzw. o- neben p-Nitroanilin nachgewiesen werden. Nach dem Absorptionsspektrum erwies sich das Reaktionsprodukt von Aceton mit diazotiertem p-Nitroanilin als eine Azoverbindung.

---

Detection of Oxocompounds. IV

Summary Enolizing oxo-compounds, that contain a -CH₂-CO- or a -CO-NH-NH-group, yield a color reaction with diazonium salt. Formaldehyde, benzaldehyde, nitrobenzaldehyde, benzoin, benzophenone etc. however do not show this reaction. 1,3-diketones yield two kinds of color reactions with diazotizedp-nitraniline; a slight diazonium salt concentration yields a red coloration, while a large excess gives a blue or green coloration. Selective detections for oxo-compounds were developed with this method. Traces of acetone may be detected in ethanol or water or in methylethyl ketone by means of diazotized aniline, 10^–3% of acetoacetic ester can be detected in ethyl acetate by means of diazotizedp-phenetidine, 10^–5% acetylacetone in aldehyde, acetylphenylhydrazine in the presence of acetanilide,m- oro- in the presence ofp-nitraniline. Judging from the absorption spectrum, the reaction product from acetone and diazotizedp-nitraniline is an azo compound.

     

Preconcentration neutron activation analysis of lanthanides by cloud point extraction using PAN

Summary Methods for the simultaneous preconcentration of lanthanides by cloud point extraction and their determination using neutron activation analysis have been developed. The preconcentration method involves the use of a nonionic surfactant and a chelating agent. A fairly small volume of surfactant-rich phase was obtained under optimized experimental conditions, leading to detection limits between 0.3 and 3.0 ng ^. g^-1. Critical parameters that influence extraction efficiency were solution pH and concentration of chelating agent, and to a lesser extent, ionic strength and temperature. Most of the chelates were quantitatively extracted (>90%) at high pH values. Selective separation can be achieved by varying some of the experimental conditions.