Preparation of Fe/B powders by mechanical alloying

Steels with a high boron content are valuable as a neutron shield in waste containers and as control absorbers in nuclear reactors. The purpose of this study was to obtain by mechanical alloying an iron powder with 50% boron (by weight) and then powder-metallurgy materials. The elementary powders were mixed in a high-energy mill for 36 h in an inert atmosphere. Samples were withdrawn at intervals, and the powder was characterized by differential thermal analysis, X-ray diffraction and electron microscopy. The Fe/B powders withdrawn at different intervals of milling were diluted with further additions of iron up to a final content of 10% boron. The mixtures were uniaxially compacted at 500 MPa; their green density was verified, and they were sintered in argon at 1150°C. Their physical properties (density and dimensional change) and bending strength were evaluated and microstructural studies and fracture tests were performed.     

Electrocatalytic properties of surface oxides on gold,platinum, and stainless steel electrodes in electrooxidation of malic acid

Electrocatalytic properties of oxides formed at gold, platinum, and stainless steel electrodes in the malic acid electrooxidation in 0.1 M Na₂SO₄ are studied. Gas chromatographic analysis of the electrolyte after holding the potential at 1.0 V for 8 h shows that on platinum and gold electrodes 2 mmol of acetaldehyde are produced and on stainless steel, 45 mmol. The acetaldehyde yield is the highest on stainless steel.From Elektrokhimiya, Vol. 41, No. 3, 2005, pp. 304–309.Original English Text Copyright © 2005 by Avramov Ivi, Popi, Antonovi.This article was submitted by the authors in English.     

Preparation of weak cation exchange packings based on monodisperse poly(glycidyl methacrylate-<Emphasis Type="Italic">co</Emphasis>-ethylene dimethacrylate) beads and their chromatographic properties

The monodisperse, macroporous poly(glycidyl methacrylate- co-ethylene dimethacrylate) beads were synthesized by a single-step swelling and polymerization method. Based on this media, a weak cation exchange (WCX) stationary phase for HPLC was synthesized by a new chemically modified method. The prepared resin has advantages for biopolymer separation, high column efficiency, low column backpressure, high protein mass recovery, and good resolution for proteins. The measured bioactivity recovery for lysozyme was 98+/-5%. The dynamic protein loading capacity of the WCX packings was 17.3 mg g(-1). The experimental results show that the synthesized WCX resin has very weak hydrophobicity.     

Analysis of steroids. XLI. Ion-pair high-performance liquid chromatographic separation of quaternary ammonium steroids on silica.

A normal-phase ion-pair chromatographic system has been developed for the high-performance liquid chromatographic investigation of pipecuronium bromide (2 beta,16 beta-bis-(N'-dimethyl-l-piperazinyl)-3 alpha,17 beta-diacetoxy-5 alpha-androstane dibromide) and related quaternary ammonium steroids. The use of silica as the stationary phase and a 96:4 mixture of acetonitrile and water containing 0.1 mol/dm3 sodium perchlorate as the eluent with detection at 213 nm enable the potential impurities as well as the hydrolytic and oxidative degradation products of pipecuronium bromide to be separated and detected down to the 0.01% level. The above system is also applicable to the high-performance liquid chromatographic investigation of other quaternary ammonium steroids (pancuronium bromide, vecuronium bromide).     

Cationic polymerization with boron halides. V. Synthesis of poly(isobutylene-b-styrene) and poly(styrene-b-isobutylene)

Block copolymers of isobutylene and styrene, PIB-b-PSt and PSt-b-PIB, have been prepared by a two-step synthesis involving (1) preparation of terminally chlorinated (telechelic) polyisobutylene or polystyrene “prepolymers” by using the H₂O/BCl₃ initiator system and (2) blocking from these telechelic prepolymers a second polymer segment by using an alkyaluminum, e.g., Et₂AlCl coinitiator. The telechelic polyisobutylene and polystyrene contain tertiary and benzylic chlorine termini, respectively. Block copolymer characterization included detailed selective solvent extraction procedures, coupled with GPC determinations, PMR, solubility, and intrinsic viscosity studies. The synthesis of PIB-b-PSt and PSt-b-PIB provides direct chemical evidence for the presence and position of active chlorine termini in BCl₃-coinitiated olefin polymerizations.     

Mathematical Correction for Polyatomic Isobaric Spectral Interferences in Determination of Lanthanides by Inductively Coupled Plasma Mass Spectrometry

The determination of lanthanides by Inductively Coupled Plasma Mass Spectrometry (ICP‐MS) is complicated by several spectral overlaps from M⁺, MO⁺ or MOH⁺ ions formed in the ICP. Especially, it is essential to avoid the spectral interferences from lighter lanthanide and Ba polyatomic ions on middle or heavier lanthanides. To tackle this problem, we have developed a mathematical correction method, which reduces all the spectral overlaps from oxide species of Pr, Nd, Ce and Sm over Gd, Tb, Dy and Ho, and Gd, Tb over Yb and Lu. It can also successfully correct the oxide and hydroxide interference of Ba over Eu. The effectiveness of the proposed the mathematical correction scheme is demonstrated for the USGS Standard Rock samples AGV‐1 and G‐2. The results show that the experimental data obtained by applying the mathematical correction scheme for lanthanides is in good agreement with the reported values, using pneumatic and ultrasonic nebulisation methods, for their ICP‐MS analysis.     

Influence of chloride anions on the electrodeposition and electroactivity of the polymer matrix in polypyrrole,poly(<Emphasis Type="Italic">N</Emphasis>-methylpyrrole) and polypyrrole derivatives functionalized by titanocene centers,in dry non-aqueous solutions

We report electrochemical studies on the influence of a small concentration of chloride ions on the electroactivity of the polymer matrix of polypyrrole (PPy), poly(N-methylpyrrole) [p(N-MePy)] and a poly(titanocene-propyl-pyrrole) derivative, p(Tc3Py) [Tc(CH₂)₃NC₄H₄; Tc=CpCpTiCl₂; Cp=C₅H₅; Cp=C₅H₄] in acetonitrile (AN), tetrahydrofuran (THF) and N,N-dimethylformamide (DMF). The polymer films were obtained on Pt disc electrodes from AN solutions of the monomers containing 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF₆) as the supporting electrolyte and then transferred to the corresponding monomer-free solution. Studies in Cl^–-containing solutions have shown that the p(Tc3Py) matrix is very sensitive to the presence of Cl^– ions in all the above solvents, namely that it was subjected to electrochemical degradation at potentials above 0.1 V vs. a Ag/0.01 M Ag⁺ in AN reference electrode. Degradation of the p(Tc3Py) matrix was also observed in chloride-free DMF+TBAPF₆ solutions. Addition of chloride ions to the AN solution containing pyrrole, N-methylpyrrole or Tc3Py inhibits the deposition of the polymer films. On the other hand, we have found that PPy and p(N-MePy) matrices after their deposition in chloride-free AN solutions show much more stable redox responses in contact with chloride and/or DMF solutions. Possible mechanisms of these effects are discussed.Abbreviations AN acetonitrile - Cp cyclopentadienyl - DMF N,N-dimethylformamide - N-MePy N-methylpyrrole - p(N-MePy) poly(N-methylpyrrole) - PPy polypyrrole - p(Tc3Py) poly[Tc(CH₂)₃NC₄H₄] - Py pyrrole - Tc titanocene=bis(cyclopentadienyl)titanium dichloride, Cp₂TiCl₂, or its radical CpCpTiCl₂ (Cp=C₅H₄) - Tc3Py titanocene-propyl-pyrrole, Tc(CH₂)₃NC₄H₄ - THF tetrahydrofuran Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

含CexZr1-xO2三效催化剂设计的神经网络仿真与优化

提出一种含CexZr1-xO2的三效催化剂的设计方法,即利用人工神经网络来进行辅助设计.首先考察了影响三效催化剂性能的一些重要因素,确定了所研究的三效催化剂模型.然后采用共沉淀方法制备了一系列铈锆固溶体,并将它们作为三效催化剂的助催化剂.采用传统的催化剂制备方法制备了一系列负载贵金属的三效催化剂,所制备的催化剂在模拟尾气中进行评价,得到的数据作为神经网络的训练样本和测试样本,建立了神经网络模型,并初步进行了预测和优化.     

MTT法测定稀土离子对BEL-7402及K562细胞的毒性及增殖毒性

用MTT法测定稀土离子在不同浓度、不同培养液中,与BEL 7402和K562细胞作用不同时间,对细胞的毒性和增殖毒性。结果表明,在含10%小牛血清培养液中,仅个别稀土离子在较高浓度时对BEL 7402细胞增殖有较弱的抑制作用;对于K562细胞,稀土离子在低浓度时对细胞增殖即表现出较强的抑制作用(P<0.05)。当培养液不含小牛血清时,较低浓度的稀土离子即可抑制BEL 7402细胞的增殖(P<0 05)。     

铜(II)与四(间甲基)苯基卟啉镉(II)取代反应动力学

用分光光度法研究了二甲亚砜溶液中, 氯化铜与meso-四(间甲基)苯基卟啉镉(Ⅱ)(Cd(Ⅱ)P)亲电取代反应的动力学. 讨论了影响反应的因素, CuCl_2+Cd(Ⅱ)P→Cu(Ⅱ)P+CdCl_2提出了反应机理并进行了验证. 用AST286微机对实验数据进行非线性最小二乘法拟合, 得到拟合曲线及似平衡步的平衡常数K及其它基元步骤的速率常数k_1, k_(-1), k_2. 研究了温度对反应的影响, 求得似平衡步的△_rH_m~-θ-, △_rS_m~-θ-及其它基元步骤的活化参数△~≠H_m, △~≠S_m.