Synthesis and crystal structure of an imidazolate-bridged dicopper tris(2-aminoethyl)amine complex

The [Cu(tren)(Im)Cu(tren)](ClO4)3·MeCN complex [tren=tris(2-aminoethyl)amine; Im=imidazolate anion] has been synthesized and characterized spectrally. The X-ray crystal structure analysis reveals that the imidazolate anion serves as a bridge to form a noncentrosymmetric dimeric structure in the complex. The co-ordination geometry about each copper(II) ion is a distorted trigonal bipyramid with three primary amine groups of the tren ligand forming the equatorial plane. The tertiary amine group and the imidazolate anion are in the axial positions. This revised version was published online in June 2006 with corrections to the Cover Date.     

Photocatalyzed [2 + 2 + 2]-cycloaddition of nitriles with acetylene: an effective method for the synthesis of 2-pyridines under mild conditions

The photocatalyzed [2 + 2 + 2]-cycloaddition of nitriles with 2 equiv of acetylene to 2-pyridines can be carried out under mild conditions and represents a valuable extension to common synthetical methods. For the ideal wavelength range (350-500 nm), lamps as well as sunlight can be used. Working at room temperature and in organic solvents such as toluene or hexane as well as in water gives satisfying results in many cases. However, it is also possible to vary the solvent and the reaction temperature of the photocatalyzed synthesis and to choose, with respect to the specific substrate, specific requirements for this particular reaction and general requirements of the method. This simple and selective method derives its potential mainly from the large variety of applicable nitriles. Suitable substrates include (functionalized) aliphatic and aromatic nitriles as well as cyanamides derived from secondary amines.     

Study of a fluorescence quenching mechanism of enoxacin and its determination in human serum and urine samples

The maximum emission wavelength of dopamine is 317 nm with excitation at 290 nm. The relative fluorescence intensity of dopamine decreased in the presence of enoxacin, which showed that fluorescence quenching occurred. The Stern-Volmer (S-V) plot showed a nonlinear relationship between the relative fluorescence intensity of dopamine and the concentration of enoxain. The quenching mechanism was studied and the results suggested that both dynamic and static quenching processes were responsible for the observed positive deviation in the S-V plot. When the S-V plot was modified by logarithm, the linear relationship was obtained between logF ₀/F and C in the range of 0.10 to 13.0 μg/mL (where F ₀ is the relative fluorescence intensity of dopamine, F is the relative fluorescence intensity of dopamine in the presence of enoxacin, and C is the concentration of enoxacin). The fluorescence quenching method for the determination of enoxacin was developed. The linear regression equation of the calibration graph of enoxacin was C = 13.70 (logF ₀/F) − 0.5836, with the correlation coefficient 0.9984. The detection limit was 2.0 ng/mL and the relative standard deviation was 2.52%. The effects of pH, the stability of dopamine in the presence of enoxacin, and foreign ions on the determination of enoxacin have been examined. The recovery of enoxacin was from 94.9 to 103.0% in a human serum sample and from 94.9 to 108.0% in a urine sample. The method is simple, rapid, and can be used for the determination of enoxacin in human serum and urine samples with satisfactory results. The text was submitted by the authors in English.     

吸附溶出伏安法测定水中痕量镉

报道了测定痕量镉的一种新方法．在０．０１ｍｏｌ／ＬＨＡｃ－０．０１ｍｏｌ／ＬＮａＡｃ－１．２×１０－５ｍｏｌ／Ｌ乙醛酸缩氨基硫脲（ＧＡＴＳＣ）体系中，Ｃｄ－ＧＡＴＳＣ产生一灵敏的吸附还原波，波的峰电位是－０．４３Ｖ（ｖｓ·ＳＣＥ），峰电流与镉的浓度在１．０×１０－８～８．０×１０－７ｍｏｌ／Ｌ范围内成直线关系．此法用于测定水中痕量镉，结果令人满意。     

Dually responsive multiblock copolymers via RAFT polymerization: Synthesis of temperature- and redox-responsive copolymers of PNIPAM and PDMAEMA

We report synthesis of temperature- and redox-responsive multiblock copolymers by reversible addition-fragmentation chain transfer (RAFT) polymerization. Well-defined α,ω-bis(dithioester)-functionalized poly(N-isopropylacrylamide) (PNIPAM) and poly(2-(dimethylamino) ethyl methacrylate) (PDMAEMA) were prepared using 1,4-bis(thiobenzoylthiomethyl)benzene and 1,4-bis(2-(thiobenzoylthio)prop-2-yl)benzene as RAFT agents, respectively. Dually responsive multiblock copolymers were synthesized in a single aminolysis/oxidation step from the α,ω-bis(dithioester)-terminated PNIPAM and PDMAEMA. The copolymers and their stimulus-responsive behavior were characterized by size exclusion chromatography, NMR, light scattering and atomic force microscopy. Due to the presence of redox-sensitive disulfide bonds between the blocks, the copolymers were readily reduced to the starting polymer blocks. The presence of temperature-responsive PNIPAM blocks provided the copolymers with the ability to assemble into core-shell nanostructures with hydrophobic PNIPAM as a core and cationic PDMAEMA as stabilizing shell when above the phase transition temperatures of PNIPAM. The temperature-induced assembly of the copolymers also showed substantial pH sensitivity. The phase transition temperature increased with decreasing pH, while molecular weight of the assemblies decreased.     

Synthesis Hexadecyl 3-{4-[2-Hydroxy-3（isopropylamino）propoxy]phenyl}propionate as Potential Ligand for Liposome Targeting to Ischemic Myocardium

Novel hexadecyl 3- { 4-[2-hydroxy-3（isopropylamino）propoxy]phenyl }propionate （HPP）was synthesized and its effect on delivery of liposomes into cultured cardiomyocytes was examined. The structure of HPP was characterized by IH NMR, 1R and MS. The amount of cardiomyocytes uptake of HPP-liposome was 3.9-fold higher than plain-liposome, and the increase was 6.2-fold when hypoxia happens. It indicated that HPP was a potential ligand for liposome targeting to ischemic myocardium.     

Analysis of Petroleum Distillates from Fire Debris Using Supercritical Fluid Extraction with a Two‐Level Orthogonal Array Experimental Design

A supercritical fluid extraction (SFE) method was developed in the present study as an effective sample pretreatment technique of petroleum distillates from fire debris. Three petroleum distillates were used as target analytes, including 95 unleaded gasoline, kerosene, and premium diesel. An orthogonal array (L16) experimental design was adopted to separately evaluate primary SFE experimental factors. The SFE efficiencies of petroleum distillates at various extraction conditions were examined and the optimized SFE conditions were identified. Experimental results demonstrated that the optimized SFE method not only provided an effective extraction method for the spiked sample, but also successfully recovered residues of petroleum distillates from fire debris.     

联萘衍生物的磺化反应研究

研究了1-和2-苯基萘, 1, 1'-和2, 2'-联萘, 2, 2-二羟基-, 2, 2'-二甲氧基和-2, 2'-甲基磺酰氧基-1, 1'-联萘等七种萘衍生物和三氧化硫的磺化反应。1-苯基萘和1, 1'-联萘的磺化先发生在4位上, 第二取代位置为6和7位。2-苯基萘和2, 2'-联萘均首先得到8位磺酸取代物, 进一步磺化得到8, 4'-和8, 8'-二磺酸取代物。2, 2'-二甲氧基-1, 1'-联萘以13:87的比例得到3位和6位磺酸取代物。2, 2'-二甲磺酰氧基-1, 1'-联萘以58:42的比例得到5位和6位磺酸取代物。2, 2'-二羟基-1, 1'-联萘的等摩尔磺化得到比例为35:65的5位和6位磺酸取代物, 和大于6摩尔的SO~3反应则以62:38的比例得到5位和6位磺酸取代物。     

Competitive adsorption of Pb2+, Cu2+, and Cd2+ ions on microporous titanosilicate ETS-10

In the present study, the competitive adsorption characteristics of binary and ternary heavy metal ions Pb2+, Cu2+, and Cd2+ on microporous titanosilicate ETS-10 were investigated in batch systems. Pure microporous titanosilicate ETS-10 was synthesized with P25 as the Ti source and characterized by the techniques of X-ray diffraction (XRD), field emission-scanning electron microscope (FESEM), nitrogen adsorption, and zeta-potential. Equilibrium and kinetic adsorption data showed that ETS-10 displays a high selectivity toward one metal in a two-component or a three-component system with an affinity order of Pb2+ > Cd2+ > Cu2+. The equilibrium behaviors of heavy metals species with stronger affinity toward ETS-10 can be described by the Langmuir equation while the adsorption kinetics of the metals can be well fitted to a pseudo-second-order (PSO) model.     

Characteristics of major dioxin/furan congeners in melted slag of ash from municipal solid waste incinerators

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in slag of fly ash from three municipal solid waste (MSW) incinerators were analyzed to observe any changes in characteristics and distribution of their congeners by melting process. Actual concentration and Toxic Equivalent (TEQ) concentration profiles of 17 major congeners of PCDDs/PCDFs for gas, fly ash and melted slag were compared. The distributions of PCDDs/PCDFs in different streams macroscopically showed similarities with the generally known profiles for emission gas from a municipal waste incinerator. The total concentrations of PCDDs/PCDFs in off-gas and fly ash have been known to be a function of incineration conditions and of air pollution control device utilization; however, their normalized distributions were independent of such conditions. The concentrations of PCDDs/PCDFs in the melted slag of fly ash were not related to the concentrations of PCDDs/PCDFs congeners in fly ash but were rather a function of the melting furnace type and operation. The total amount of PCDDs/PCDFs in the melted slag of fly ash contained almost 150–27,000 times less dioxin than that in fly ash, however, the TEQ of dioxin in the slag was reduced by 435–43,500 times, which could enable them to be utilized as recycled construction materials. In normalized TEQ concentration profiles of 17 congeners of PCDDs/PCDFs, the ratio of PCDFs to PCDDs changed from 1.32 to 2.19 by melting, which showed relatively higher portion of furans left in melted slag than those in fly ash. By comparing reduction ratios of different congeners, PCDDs (dioxins) were relatively easier to destruct than PCDFs (furans) during melting process. The most difficult congener to destruct could be octa-chlorinated dibenzofuran (OCDF) among major congeners. For slag cooling methods, dioxin concentration in TEQ of slow cooled slag by air was four times higher than that of fast cooled slag by water. Thus cooling by water is more appropriate with the added beneficial effect of producing granules/particles, which can be utilized as roadbed materials.