Optimization of the reduction of Se(VI) to Se(IV) in a microwave oven

 Parameters for the reduction of Se(VI) to Se(IV) in HCl medium by heating in a microwave oven have been optimized. The reduction resulted to be quantitative applying 100% power, corresponding to 600 W heating for 2 min in 6 mol/L or for 3 min in 4 mol/L HCl. The behavior of selenomethionine and selenocystine under the optimized reduction conditions was studied in order to evaluate a possible interference of these selenium species in the determination of Se(VI). The final determination of Se(IV), and Se(VI) were done by hydride generation-atomic absorption spectrometry. The analytical merits of the method are reported. The method was applied to the selective determination of Se(IV), and Se(VI) in spiked river and lake water. Received: 6 December 1996/Revised: 1 April 1997/Accepted: 3 April 1997     

Development of a fibrinolytic surface: specific and non-specific binding of plasminogen

Plasminogen is the primary zymogen in the fibrinolytic pathway, and its primary function involves degradation of fibrin. Biomaterials often show adsorption of fibrinogen and subsequent formation of fibrin. Plasminogen's function in vivo could be adapted to facilitate its activation and fibrinolytic function on a biomaterial surface. In order to elucidate plasminogen function adsorbed to a model fibrinolytic surface ligands known to affect plasminogen properties in solution were attached to model silica surfaces to study the effects of immobilized ligands as fibrinolytic activators. Model silica surfaces were synthesized which contained covalently attached lysine moieties (surface I), sulfonate moieties (surface II) or a combination of both (surface III). Lysine moieties on these model surfaces interact specifically with multiple lysine-binding sites of plasminogen and induce a number of changes in conformation and function. Sulfonate moieties interact non-specifically with accessible lysine and arginine residues of plasminogen and also affect the function of plasminogen. Inherent physico-chemical properties monitored following plasminogen adsorption were activation to plasmin, enzymatic activity, fluorescent intensity, and fluorescent polarization, monitored by total internal reflection fluorescence, each of which are affected by plasminogen conformation.

Correlations were as follows: increased fluorescent intensity and decreased fluorescent polarization were indicative of plasminogen conformational changes and are correlated to increased enzymatic activity of plasmin. Surfaces I and III showed a 20% increase in fluorescent intensity, and a 25% and 8% decrease in fluorescent polarization, respectively, in comparison to surface II. The specific activity for surfaces I and III was increased 11.3 and 1.8 fold above that found for surface II. Plasminogen incubated with sulfonate groups in solution resulted in no increase in fluorescent intensity and a slight decrease in fluorescent polarization as compared with plasminogen alone and reduced specific activity of plasmin in the presence of sulfonate as compared with plasmin alone. Lysine or ε-aminocaproic acid (ACA) incubated with plasmin in solution showed a 30% and 10% increase in fluorescent intensity, a 24% and 5% decrease in fluorescent intensity, and maximum specific activity increased 3.6 and 2.5 fold, respectively, over plasminogen alone.

Interactions of plasminogen with ligands for its lysine-binding sites produced dramatic effects both in solution and adsorbed to model fibrinolytic surfaces. The characterization of these interactions along with known fibrin interactions will allow selection of appropriate surface modifications to enhance the fibrinolysis of thrombus formed at a biomaterial interface. These modifications may lead to a native-like surface structure to protein and cellular components of blood and create a more biocompatible surface.     

Kinetics and mechanism of the oxidation of benzyl alcohol by potassium chlorochromate

The kinetics of the oxidation of benzyl alcohol by potassium chlorochromate, KCrClO₃, has been studied in dimethyl sulfoxide-dichloromethane medium. The reaction is catalyzed by acid. The effects of temperature and solvent composition were studied and activation parameters evaluated. Probable mechanisms are discussed.

---

, KCrClO₃, . . . .

     

Surfactant polymer interactions between strongly interacting cationic surfactants and anionic polyelectrolytes from conductivity and turbidity measurements

The interactions between oppositely charged surfactant/polymer mixtures have been studied using conductivity and turbidity measurements. The dependence of aggregation phenomenon on the chain length and head group modifications of conventional cationic surfactants, i.e., hexadecyl- (HTAB), tetradecyl- (TTAB), and dodecyltrimethylammonium bromides (DTAB) and dimeric cationic surfactants, i.e., decyl- (DeDGB) and dodecyldimethylgemini bromides (DDGB), is investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolytes at critical aggregation concentration (cac). The cac values are considerably lower than the critical micelle concentration (cmc) values for the same surfactant. After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in aqueous polyelectrolyte than in pure water. Among the conventional and dimeric cationic surfactants, DTAB and DeDGB, respectively, have been found to have least interactions with oppositely charged polyelectrolytes.     

Two New Cyclopeptides from Arenaria oreophila (Caryophyllaceae)

Two new cyclopeptides, named arenariphilin A ( 1 ) and arenariphilin B ( 2 ), were isolated from the whole plants of Arenaria oreophila. Their structures were determined as cyclo‐(Thr‐Gly) ( 1 ) and cyclo‐(Ser₁‐Gly ‐Ser₂‐Ile ‐Phe₁‐Phe₂) ( 2 ) on the basis of spectral data, especially by 2D‐NMR.     

Radiation polymerization of thermo-sensitive poly (N-vinylcaprolactam)

Temperature-sensitive poly (N-vinylcaprolactam) both in water-soluble state and in gel was prepared by γ-radiation polymerization. The effects of radiation dose, radiation dose rate and monomer concentration on polymerization and the low critical solution temperature characteristics of the polymer were studied. The results show that the polymer prepared within certain radiation dose (beyond 2 kGy) and dose rate range (2–14 Gy/min) has good temperature sensitivity and uniformity.     

Preparation of trout liver microsomes for iron speciation in P-450 enzymes by AE–FPLC with ICP–(ORS)MS detection

Cytochromes P-450 are members of a superfamily of hemoproteins involved in the oxidative metabolism of various physiological and xenobiotic compounds in eukaryotes and prokaryotes. The multiplicity of this group of enzymes has been widely studied by chromatographic techniques, mainly high-performance liquid chromatography (HPLC). Because these enzymes are membrane-bound proteins, sample preparation for chromatographic separation of P-450 enzymes requires a solubilization step. The sample-preparation procedures are critical, because detergents affect not only the efficiency of protein solubilization but also their further chromatographic resolution. Trout liver microsomes have been taken here as a model sample to investigate iron speciation in cytochrome P-450. Trouts were treated intraperitoneally with -naphthoflavone, a potent inducer of some P-450 enzymes, and a microsomal suspension containing 7.4±0.1 nmol mL^–1 P-450 enzymes was obtained by ultracentrifugation. Lubrol PX was selected as detergent for solubilization, resulting in about 90% solubilization recovery. The solubilized cytochromes P-450 were further separated by AE–FPLC, with UV detection, or coupled to ICP–MS with an octapole reaction system, ICP–(ORS)MS (monitoring Fe signals at masses 54, 56, and 57). A sampling procedure and chromatographic conditions are developed and were successfully applied to iron speciation in trout liver P-450 enzymes. ICP–(ORS)MS detection of P-450 enzymes is Fe-specific and so will give accurate information on the prosthetic group of the protein, which can constitute an advantageous alternative to classical methods for detection of these hemoproteins.     

Analysis of organic acids in wines by Fourier-transform infrared spectroscopy

Fourier-transform infrared (FTIR) spectroscopy has been a major point of development in many wine laboratories in recent years. It enables almost instant analysis of several properties of wine, usually with very good precision and accurate results. Nevertheless, validation procedures should not be forgotten and should be fully performed. Recovery experiments were performed by spiking wine samples with different amounts of organic acids (tartaric, malic, lactic, acetic and citric—the most prominent in wines). After FTIR analysis of the total acidity and of each organic acid concentration, recoveries were calculated. For total acidity recovery results were, in general, good and very close to 100% (64–111%). On the other hand, for individual organic acid concentrations, the recovery results were lower than 100% (11–73%) for all spiking additions. These results could be explained by spectroscopic interferences between the organic acids. Because they have similar infrared spectra, it is not easy to distinguish between them and, therefore, to achieve accurate calibration. When total acidity, with a different infrared spectrum from the other abundant compounds in the wine, was taken as a single property the recovery results were acceptable.     

Speciation of cyclo(Pro-Gly)<Subscript>3</Subscript> and its divalent metal-ion complexes by electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry (ESI-MS) was used to study the binding of selected group II and divalent transition-metal ions by cyclo(Pro-Gly)3 (CPG3), a model ion carrier peptide. Metal salts (CatXn) were combined with the peptide (M) at a molar ratio of 1:10 M/Cat in aqueous solvents containing 50% vol/vol acetonitrile or methanol and 1 or 10 mM ammonium acetate (NH4Ac). Species detected include [M+H]+, [M+Cat-H]+, [M2+Cat]2+, [M+Cat+Ac]+, and [M+Cat+X]+. The relative stabilities of complexes formed with different cations (Mg2+, Ca2+, Sr2+, Mn2+, Co2+, Ni2+, Cu2+, and Zn2+) were determined from the abundance of 1:1 and 2:1 M/Cat species relative to that of the unbound peptide. The largest metal ions (Ca2+, Sr2+, and Mn2+) formed the most stable complexes. Reducing the buffer concentration increased the overall extent of metal binding. Results show that the binding specificity of CPG3 depends upon the size of the metal ion and its propensity for electrostatic interaction with oxygen atoms. Product ion tandem mass spectrometry of [M+H]+ and [M+Cu-H]+ confirmed the cyclic structure of the peptide, although the initial site(s) of metal attachment could not be determined.     

EPR parameters and local geometry for Cr3+ and V2+ ions in HfS2 crystals

From the high-order perturbation formulas of EPR parameters (zero-field splitting D, g factors gparallel, gperpendicular and hyperfine structure constants Aparallel, Aperpendicular) based on the two spin-orbit coupling parameter model for 3d3 ions in trigonal symmetry, the EPR parameters of Cr3+ and V2+ ions in HfS2 crystals are calculated. From the calculations, it is found that the local trigonal distortion angle theta of impurity center in HfS2:Cr3+ is smaller than that in HfS2:V2+. The dominant cause of the small zero-field splitting |D| and g-anisotropy |Deltag|=|gparallel-gperpendicular| in HfS2:Cr3+ (compound to HfS2:V2+) is due to the small local trigonal distortion angle theta rather than to the small impurity-ligand distance R in HfS2:Cr3+.