Protonation-induced structural change of lyotropic liquid crystals in oley- and alkyldimethylamine oxides/water systems

Lyotropic phase behavior of the nonionic and the half-ionized oleyldimethylamine oxide (OlDMAO)/water systems was investigated using polarized light microscopy, small-angle X-ray diffraction, and differential scanning calorimetry. Nonionic OlDMAO formed isotropic micellar solution, nematic, hexagonal, cubic, and lamellar liquid crystalline phases as the surfactant concentration increased. In contrast, half-ionized OlDMAO (i.e., 1:1 mixture of the nonionic and the protonated species) had a greater tendency to form bilayer structures, and the phase diagram became quite similar to those of double-chained ionic surfactants rather than single-chained ones, despite the introduction of positive charges to the nonionic one. The preference of the bilayer structures in the half-ionized OlDMAO was interpreted in terms of the dimers stabilized by the hydrogen bond between the nonionic and protonated species. For alkyldimethylamine oxides with a saturated hydrocarbon chain (CnDMAO, chain length: n = 14, 16, and 18), the phase sequence of lyotropic liquid crystals was hardly affected by the protonation, but an elongation of the cylinders of the hexagonal phase was observed for the half-ionized C14DMAO. Consequently, it can be considered that the dominant bilayer formation of the half-ionized OlDMAO is attributed to the combined effect of the hydrogen-bonded dimer formation and the cis-double-bond configuration of the alkyl chain.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

Studies on polymers containing functional groups. II. Polymerization behavior of o-hydroxystyrene

The polymerization behavior of o-hydroxystyrene with free-radical and cationic initiators and without an initiator was examined. The structures thus obtained were estimated. Although polymerization behavior of o-hydroxystyrene was rather complicated, according to the results, it appeared that each polymerization more or less might simultaneously follow the two types of mechanisms: normal vinyl polymerization and polymerization through the addition to benzene nuclei. The proportion of addition to benzene nuclei was considered to be highest in the polymerization with BF₃·(OEt)₂ and lowest in that with azobisisobutyronitrile. Degrees of polymerization of these polymers were low in all cases (42–82). Some brief experiments on copolymerization of o-hydroxystyrene were carried out.     

Effect of hydrophobic amino acids on the conformational change of decapeptides in micellar environments

A series of peptides containing various hydrophobic amino acids [methionine (Met), leucine (Leu), norleucine (Nle), phenylalanine (Phe), 2-aminooctanoic acid (Aoc), and 2-aminodecanoic acid (Ade)] were synthesized and their conformations were studied using circular dichroism (CD) spectroscopy in different solvents such as water, methanol, and aqueous solution of ammonium tetradecanesulfonate. Peptides containing hydrophobic amino acids with linear side chains formed -sheets in water and methanol. Electrostatic interaction between the charged side chain (lysine) and a micelle consisting of an anionic surfactant, ammonium tetradecanesulfonate, is necessary for the formation of -helices in micellar environments. The conformational transition from -helix to -sheet structure required moderate hydrophobicity and linear side chains. This conformational transition depended on the surfactant concentration.     

The characteristic fragment ions and visualization of cationic starches on pulp fiber using ToF‐SIMS

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was used to investigate the distribution of cationic starch on pulp fiber. To identify the characteristic fragment ions of the cationic starches, deuterium‐labeled cationic starches were prepared and analyzed using ToF‐SIMS. The starch 2‐hydroxypropyltrimethylammonium chloride derivative generated characteristic fragments at m/z 58 and 59, which were identified as [H₂C?N(CH₃)₂]⁺ and [N(CH₃)₃]^+·, respectively. The fragmentation patterns were also suggested. From the imaging analysis, the adsorption of the cationic starch on fibers was uneven on individual fibers, as well as between fibers. This may have been on account of fiber morphology and structure. On examining scanning electron microscope (SEM) images, the quaternary ammonium starch derivative (QS) did not penetrate the fiber. No migration of cationic starch was observed under various drying conditions. Copyright © 2007 John Wiley & Sons, Ltd.     

Cobaltporphyrin‐adsorbed carbon black: highly efficient electrocatalysts for oxygen reduction

meso‐Substituted cobalt porphyrins adsorbed on carbon black were prepared as catalysts for the electroreduction of O₂. The catalyst, which was prepared by using a homogenizer in mixing cobalt tetraethylporphyrin and carbon black, gave rise to electroreduction of O₂ at a remarkably positive potential (E_p = 0.45 V versus saturated calomel electrode (SCE)) and showed a high selectively for the four‐electron reduction (n = 3.8). Electrochemical study and extended X‐ray absorption fine structure (EXAFS) analysis revealed that the adsorbed face‐to‐face dimeric aggregates of cobalt porphyrin molecules were highly efficient catalysts for electroreduction of O₂. Copyright © 2005 John Wiley & Sons, Ltd.     

A simple and easy access to 3-N-alkyl-5-vinyloxazolidinones mediated by palladium-phosphine catalysts

A new entry for the synthesis of 3-alkyl substituted 5-vinyloxazolidin-2-one derivatives 2 from cis-2-butenylene-1,4-dicarbonate 1 and primary amines mediated by palladium-phosphine catalysts is described. The scope and limitation, a plausible mechanism, and an asymmetric version of the reaction are also discussed.     

Multielement determination in tobacco leaves by photon activation analysis

A nondestructive photon activation procedure with 30 MeV bremsstrahlung followed by high-resolution gamma-spectrometry has been applied to the multielement determination in tobacco leaves and commercial cigarettes. The elements determined by this method included essential minor elements such as Ca, Cl, K and Mg, essential trace elements such as Fe, Mn and Zn, and possibly toxic elements such As and Sb. The NBS Orchard Leaves could successfully be used as a comparative standard. The method is quite simple and gives good reproducible results for at least 12 elements.     

Solvent and steric effects on the extraction of copper(II) with pivalic acid

The solvent extraction of copper(II) with trimethylacetic acid using benzene and 1-octanol as solvents was performed at 25 degrees C and 0.1 mole. dm(-3) ionic strength in the aqueous phase. In contrast to the extraction of copper(II) with a saturated straight-chain carboxylic acid in benzene, the dimeric copper(II) trimethylacetate was observed to dissociate into the monomer, even at a moderately high concentration of copper(II) in the benzene phase. In the system using 1-octanol as a solvent, both the monomeric and dimeric copper(II) species are suggested to be solvated by some 1-octanol molecules. It has been found that the dimerization and adduct formation of copper(II) species in benzene may more effectively enhance the extractability of copper(II) than the solvation by 1-octanol molecules.     

A fluorimetric, column-switching HPLC and its application to an elimination study of LLU-alpha enantiomers in rat plasma

A method for the enantiomeric determination of 2,7,8-trimethyl-2-(beta-carboxyethyl)-6-hydroxy chroman (LLU-alpha, gamma-CEHC) in rat plasma was developed using high-performance liquid chromatography (HPLC) with a fluorimetric derivatization with 4-N, N-dimethylaminosulfonyl-7-piperazino-2,1,3-benzoxadiazole (DBD-PZ) followed by O-acetylation with acetyl chloride. The proposed HPLC system used two non-chiral columns (phenyl and octadecylsilica) and a chiral column (a modified cellulose type), which were connected via two column-switching valves. A derivatized sample prepared from rat plasma was first separated on the phenyl column, and the fraction including LLU-alpha derivative was introduced to the octadecylsilica column to quantify the concentration of the mixture of S- and R-LLU-alpha. Finally, the LLU-alpha derivative was directly injected into the chiral column to obtain the ratio of the enantiomers. The proposed HPLC system was applied to the enantiomeric determination of LLU-alpha in plasma after intravenous administration of racemic LLU-alpha. S-LLU-alpha was eliminated faster than R-LLU-alpha, and its concentration in plasma decreased to one-third at 2 min after dosing.