In-situ probing of the biotic-abiotic boundary of plants by laser desorption/ionization time-of-flight mass spectrometry

Laser desorption/ionization time-of-flight (LDI-TOF) mass spectrometry was applied for the direct analysis of cuticular waxes on intact plant tissues. Cuticular wax compounds were ionized by laser desorption in the presence of colloidal silver. Silver-adduct ions were detected on samples from Arabidopsis thaliana and from maize. Good spot-to-spot reproducibility indicated homogeneous coverage of the sample by the fine colloidal material. The results were consistent with GC-MS analyses of cuticular extracts, thus confirming the feasibility of direct analysis based on this protocol. Molecular masses of the adduct ions correspond well with the known composition of cuticular waxes. Moreover, LDI-TOF gave good estimates of the relative local abundances of a given compound. However, bias was found in cases where compounds with different ionization efficiencies were analyzed.     

A thorough study of the surface wax of apple fruits

The composition of the surface waxes of three apple ( Malus domestica L.) cultivars ("Florina", "Golden B" and "Ozark Gold") has been studied by means of spectroscopic and GC–MS analysis of the class-fractionated mixture of components. Odd n -alkanes, mainly C₂₇ and C₂₉ molecules, are prevalent in the saturated fraction. Small concentrations of alkenes were also found; the C_28:1 component is strongly (72%) in excess over the other 1-alkenes. Straight-chain esters (mainly of palmitic acid) of saturated primary alcohols (C₁₈–C₃₀) were also detected; whereas the acyl moiety is made up essentially of an even number of carbons, the alcohol counterpart does not exhibit this characteristic. Aldehydes are present (C₂₀–C₃₀) with the homologue patterns C₂₆–C₃₀ most strongly represented. Straight-chain free secondary alcohols characterize the waxes of "Florina" and "Ozark Gold"; the hydroxy function is located far from the extremity of the carbon framework. Outstanding is the presence of three alcohols with 29 carbon centres. These alcohols are accompanied by free straight-chain primary alcohols, mainly with even-numbered carbon chains in the range C₂₆–C₃₀. Free fatty acids are present; all of have a framework of even-numbered carbon chains mainly in the range C₁₆–C₂₀. C_18:1 (oleic acid) is well represented.     

The hydration of sodium dehydrocholate micelles

The hydration of micellised sodium dehydrocholate molecules was determined by viscosity measurements. It was found that there are 39 water molecules for each micellised surfactant molecule. About ten water molecules may be attributed to the hydration of the sodium carboxylate group. By assignation of two water molecules to each of the three carbonyl groups, the total hydration of a micellised sodium dehydrocholate molecule was estimated as about 16 water molecules. The remaining 23 water molecules per micellised sodium dehydrocholate molecule may be attributed to water trapped in the structure of micelles.     

Determination of ambroxol in an automated multi-pumping pulsed flow system.

A new flow methodology exploiting the multi-pumping approach was developed for the spectrophotometric determination of ambroxol hydrochloride in pharmaceutical preparations. The flow manifold was implemented by using, exclusively, multiple solenoid-actuated micro-pumps, which acted simultaneously as sample insertion, solutions propelling and reagents commutation units. Linear calibration plots were obtained over an ambroxol concentration ranging from 10 to 200 mg l(-1) (r.s.d. < 0.5%, n = 15) and a sampling rate of about 60 samples per hour (flow rate = 1.92 ml min(-1), sample volume = 80 microl).     

Novel CFCs-substitutes recommended by EPA (hydrofluorocarbon-245fa and hydrofluoroether-7100): Ion chemistry in air plasma and reactions with atmospheric ions

The ion chemistry of the title compounds, a nonafluorobutyl methyl ether and a hydrofluoropropane, is elucidated by a combination of studies using atmospheric pressure ionization mass spectrometry and triple quadrupole mass spectrometry. In the positive ion mode, the hydrofluoroether readily forms an [M - F]+ ion, attributable to hydronium ion induced dehydrofluorination, the product of which can be further hydrated to give a protonated hydrofluoroester. By contrast, the hydrofluoropropane does not react with the hydronium ion but rather gives hydrofluoroalkenylium cations via H atom and F atom abstraction by the dioxygen radical cation. In the negative ion mode, the fluorobutyl methyl ether undergoes dissociative electron capture with O2-*, O2-*(H2O), O3-*, and NO2- to generate the fluorobutoxy anion, which can dissociate by CF2[doublebond]O loss to give the perfluorocarbanion when the precursor ions are internally excited. The hydrofluoropropane reacts readily with common atmospheric anions to form molecular complexes with F-, O2-*, and O3-* and the strongly H-bonded species, O2-*(HF) and F-(HF). Interestingly, isomeric pentafluoropropanes form in the reaction with O2-*, either O2-*(HF) or F-(HF), depending on the specific pattern of the fluoro substitution.     

Studies on phosphatidylserine by tandem quadrupole and multiple stage quadrupole ion-trap mass spectrometry with electrospray ionization: Structural characterization and the fragmentation processes

Low-energy CAD product-ion spectra of various molecular species of phosphatidylserine (PS) in the forms of [M−H]⁻ and [M−2H+Alk]⁻ in the negative-ion mode, as well as in the forms of [M+H]⁺, [M+Alk]⁺, [M−H+2Alk]⁺, and [M−2H+3Alk]⁺ (where Alk=Li, Na) in the positive-ion mode contain rich fragment ions that are applicable for structural determination. Following CAD, the [M−H]⁻ ion of PS undergoes dissociation to eliminate the serine moiety (loss of C₃H₅NO₂) to give a [M−H−87]⁻ ion, which equals to the [M−H]⁻ ion of a phoshatidic acid (PA) and give rise to a MS³-spectrum that is identical to the MS²-spectrum of PA. The major fragmentation process for the [M−2H+Alk]⁻ ion of PS arises from primary loss of 87 to give rise to a [M−2H+Alk−87]⁻ ion, followed by loss of fatty acid substituents as acids (R_xCO₂H, x=1,2) or as alkali salts (e. g., R_xCO₂Li, x=1,2). These fragmentations result in a greater abundance of [M−2H+Alk−87−R₂CO₂H]⁻ than [M−2H+Alk−87−R₁CO₂H]⁻ and a greater abundance of [M−2H+Alk−87−R₂CO₂Li]⁻ than [M−2H+Alk−87−R₁CO₂Li]⁻; while further dissociation of the [M−2H+Alk−87−R_{2(or 1)}CO₂Li]⁻ ions gives a preferential formation of the carboxylate anion at sn-1 (R₁CO₂⁻) over that at sn-2 (R₂CO₂⁻). Other major fragmentation process arises from differential loss of the fatty acid substituents as ketenes (loss of R_x′CH=CO, x=1,2). This results in a more prominent [M−2H+Alk−R₂′CH=CO]⁻ ion than [M−2H+Alk−R₁′CH=CO]⁻ ion. Ions informative for structural characterization of PS are of low abundance in the MS²-spectra of both the [M+H]⁺ and the [M+Alk]⁺ ions, but are abundant in the MS³-spectra. The MS²-spectrum of the [M+Alk]⁺ ion contains a unique ion corresponding to internal loss of a phosphate group probably via the fragmentation processes involving rearrangement steps. The [M−H+2Alk]⁺ ion of PS yields a major [M−H+2Alk−87]⁺ ion, which is equivalent to an alkali adduct ion of a monoalkali salt of PA and gives rise to a greater abundance of [M−H+2Alk−87−R₁CO₂H]⁺ than [M−H+2Alk−87−R₂CO₂H]⁺. Similarly, the [M−2H+3Alk]⁺ ion of PS also yields a prominent [M−2H+3Alk−87]⁺ ion, which undergoes consecutive dissociation processes that involve differential losses of the two fatty acyl substituents. Because all of the above tandem mass spectra contain several sets of ion pairs involving differential losses of the fatty acid substituents as ketenes or as free fatty acids, the identities of the fatty acyl substituents and their positions on the glycerol backbone can be easily assigned by the drastic differences in the abundances of the ions in each pair.     

A contribution to the trace analysis of high-purity iron by atomic spectrometry (flame-AAS, furnace-AAS, ICP-OES)

Summary Various possibilities for the determination of trace impurities in high-purity iron by atomic spectrometry were investigated in detail. For Ba, Bi, Cd, Co, Cr, Cu, Mn, Ni, Pb, Ti and V, flame AAS, furnace AAS and ICP-OES were firstly evaluated in terms of their power of detection. Detection limits in the g/g-range could be achieved by direct determination. For determination in the ng/g-range a removal of iron by a solvent extraction technique prior to the instrumental measurement was required. The power of detection of direct determination, and of combined procedures were compared with regard to routine applicability and a minimization of systematic errors.     

Quantification of polychlorinated biphenyls (PCBs) and hexachlorobenzene (HCB) in the picogram/liter range in water of the river Elbe

Sampling and determination of dissolved and particlebound PCBs and HCB in the river Elbe are described. A new filtration/adsorption unit for sampling of dissolved lipophilic contaminants was developed. The detection limit for dissolved PCBs and HCB was 5 pg/l. The data show that more than 98% of the PCBs and of HCB in the water of the river Elbe are particle-bound.     

Preparation and mechanical properties of thermal energy storage microcapsules

A series of heat energy storage microcapsules was prepared using melamine-formaldehyde resin as the shell material and the mechanical properties of the shell were investigated. A phase change material whose melting point was 24 °C was used as core and the quantity of heat involved in phase transition was 225.5 J/g. Average diameter of the microcapsules varied from 5 to 10 μm, and the globular surface was smooth and compact. The mechanical properties of the shell were evaluated by observing the surface morphological structure change after application of pressure by means of scanning electron microscopy. When the mass ratio of the core and shell material is 3:1, a yield point of about 1.1×10⁵ Pa was found and when the compression was increased beyond this point the microcapsules showed plastic behavior. This has been attributed to the cross-link density and to the high degree of reaction of the shell material. Different yield points subsequently reflected differences in the mechanical behavior. It was also found that the mechanical intensity of double-shell microcapsules was better than that of single shelled ones.     

Spectrum analysis of U-doped LaBr3 single crystals. Part 1: crystal-field analysis

Single crystals of U³⁺:LaBr₃ were grown by the Bridgman-Stockbarger technique. High-resolution polarized absorption spectra of the crystals were recorded at 4.2 K in the 4000-50,000 cm⁻¹ range. Sixty-four experimental crystal-field energy levels of the U³⁺ ion were fitted to a semiempirical Hamiltonian employing free-ion, one-electron crystal-field as well as two-particle correlation crystal-field (CCF) operators with an r.m.s. deviation of 28 cm⁻¹. The performed analysis of the spectra enabled the determination of crystal-field parameters and assignment of the observed 5f³→5f³ transitions. The effects of selected CCF operators on the splitting of some specific U³⁺ multiplets have been investigated and the obtained values of Hamiltonian parameters are discussed and compared with those reported in previous analyses.