Ruthenium-catalyzed one-pot hydroformylation of alkenes using carbon dioxide as a reactant

A new hydroformylation of alkenes using carbon dioxide as a reactant is shown to take place in the presence of ruthenium cluster complexes and halide salts. Similar or even better yields of alcohols were formed as compared to the conventional hydroformylation with CO under the same reaction conditions. The reaction proceeded in three steps: CO₂ is first converted to CO; then it is used as a reagent for hydroformylation to give aldehyde; subsequently, it is hydrogenated to alcohol. ESI-mass spectrometric analyses of the reaction solutions indicated formation of four kinds of ruthenium anionic complexes including tetra-, tri-, and mononuclear species. On the basis of experimental findings, possible roles of these complexes are discussed.     

Stability and vibrational spectra of toroidal isomers of C 240

To study the thermodynamic and mechanical stability of toroidal isomers of C ₂₄₀, we use a semi-empirical tight-binding theory and calculate their electronic structure, cohesive energy and vibrational spectra within the harmonic approximation. From these, we deduce their free energy at temperatures up to 1500K. The results are also compared to the isomer with icosahedral symmetry. Finally, we discuss within this approach, their stability and abundance.     

Thermodynamic properties of the Cu-Au system using a face-centered-cubic lattice model with a renormalized potential

A Monte Carlo simulation is carried out to study thermodynamic properties of Cu-Au alloys using a face-centered-cubic (fcc) lattice-gas model. To obtain quantitatively accurate results, a Finnis-Sinclair-type potential, which has been widely used for molecular dynamics (MD) simulations, is employed. To overcome some shortcomings of lattice-gas models such as neglecting vibrational entropy, the potential is mapped onto the fcc lattice using the renormalization technique. The renormalized potential gives an improved Cu-Au phase diagram compared to the original MD potential applied directly on the lattice.     

Preparation and properties of aromatic polyamides from 5-t-butylisophthalic acid and various aromatic diamines

Aromatic polyamides (aramids) having pendant t-butyl group were synthesized by the direct polycondensation of 5-t-butylisophthalic acid with various aromatic diamines in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The aramids having inherent viscosities of 0.6–2.4 dL/g were obtained in quantitative yields. These polymers were readily soluble in various solvents such as NMP,N,N-dimethylacetamide, dimethyl sulfoxide, and pyridine, and gave transparent, tough and flexible films by casting from the NMP solutions. The aramids had glass transition temperatures between 250 and 330°C, and started to lose weight around 350°C, with 10% weight loss being recorded at about 450°C in air.     

Preparation and properties of polyarylates from 5-t-butylisophthaloyl chloride and various bisphenols

Polyarylates containing a t-butyl pendant group were prepared from 5-t-butylisophthaloyl chloride and various bisphenols through the phase-transfer catalyzed two-phase polycondensation. The polyarylates having inherent viscosities up to 3.1 dL/g were obtained quantitatively. They were readily soluble in various solvents such as chloroform, m-cresol, and pyridine. Coloreless, transparent, and flexible films could be cast from the chloroform solutions of the polymers. The polyarylates had glass transition temperatures between 210 and 320°C, and did not lose weight below 350°C, with 10% weight loss being recorded at 395–450°C in air.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.     

NMR studies of phosphinenickel(0) complexes of ethyl methacrylate Ni(PR3)2(CH2=C(CH3)COOC2H5)

¹³C NMR data are given for a series of phosphinenickel(0) complexes of ethyl methacrylate (ema), Ni(PR₃)₂(CH₂=C(CH₃)COOC₂H₅) (PR₃ = PPh₃ (Ia), PEtPh₂ (Ib), PEt₂Ph (Ic), PMe₂Ph (Id), PEt₃ (Ie)). The olefinic carbon signals of ema shift upfield by 71.5–86.5 ppm on coordination, the magnitude of the upfield shift increasing with increase in the bacisity of the phosphine ligand. The effect of the basicity of PR₃ is discussed on the basis of the back-bonding from Ni to ema. Variable temperature¹H NMR studies reveal that the ema of Id, the complex having the least sterically demanding phosphine ligands, exchanges with free ema in toluene on the NMR time scale. The dependence of the rate of exchange on the concentration of ema shows that the exchange proceeds through anS_N2 mechanism. The activation parameters are: ΔH₂₇₃^≠ 2.75 kcal/mol, ΔG₂₇₃^≠ 12.7 kcal/mol, ΔS₂₇₃^≠ ?37 e.u. The³¹P NMR spectra of the complexes show two doublets when the exchange is frozen out, indicating the inequivalence of the two phosphine ligands in the ema-coordinated complex. The difference in the³¹P chemical shifts of the two coordinated tertiary phosphines increases with increase in the basicity of the PR₃ ligand.     

Synthesis and properties of segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers

New segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers were synthesized by the chain extension of α,w-diamine-terminated poly(ether sulfone) oligomer with both aromatic dicarboxylic acid chlorides and tetracarboxylic dianhydrides, respectively. Crystallization of the poly(ether sulfone)unit was suppressed by the introduction of amide or imide linkage along the polymer backbone, giving amorphous copolymers that were +eadily soluble in various organic solvents. The copolymers had somewhat higher glass transition temperatures than the parent poly(ether sulfone). They afforded transparent and tough films by solution casting. © 1992 John Wiley & Sons, Inc.     

Stereoselective synthesis of procyanidin B3-3-O-gallate and 3,3″-di-O-gallate, and their abilities as antioxidant and DNA polymerase inhibitor

A simple method for the synthesis of procyanidin B3 substituted with a galloyl group at the 3 and 3″ position is described. Condensation of a benzylated catechin-3-O-gallate electrophile with a nucleophile, catechin and catechin-3-O-gallate, proceeded smoothly and stereoselectively to afford the corresponding dimer gallates, procyanidin B3-3-O-gallate and procyanidin B3-3,3″-di-O-gallate, in good yields. Further, their antioxidant activities on UV-induced lipid peroxide formation, DPPH radical scavenging activity and inhibitory activity of DNA polymerase were also investigated. Among three procyanidin B3 congeners (procyanidin B3, 3-O-gallate and 3,3″-di-O-gallate), the 3,3″-di-O-gallate derivative showed the strongest antioxidant and radical scavenging activity. Interestingly, the 3-O-gallate derivative was the strongest inhibitor of mammalian DNA polymerase with IC₅₀ value of 0.26 μM, although it showed the weakest antioxidant and radical scavenging activity. It became apparent that the presence of a galloyl group at the C-3 position in the proanthocyanidin oligomer was very important for biological activity, however, the antioxidant activity of these compounds was not parallel to the DNA polymerase inhibitory activity.     

One-pot synthesis of N-acyl-substituted sulfamides from chlorosulfonyl isocyanate via the Burgess-type intermediates

The title N-alkoxycarbonyl- or N-aryloxycarbonyl-substituted sulfamides were synthesised in one-pot in efficient yields from chlorosulfonyl isocyanate (CSI), alcohols and aqueous (or dry) amines via the corresponding water-resistant intermediates, carboxysulfamoylammonium salts (Burgess-type reagents), which were generated in situ by the deactivation of the corresponding water-sensitive N-(chlorosulfonyl)carbamates with tertiary amines.