Determination of optimal formulation for extrusion granulation by compression test of wet kneaded mass

The purpose of this study is to propose the application of a compression test to the determination of an optimal formulation for extrusion granulation. The electric current during extrusion was measured and the characteristics of the wet kneaded mass in the compression test were analyzed under various operating conditions, with different types of extruders and several formulations of kneaded mass. It was found that addition of a binder (HPC-L) to pharmaceutical powders lowered the load of a high-compressing type extruder, since the binder reduced the friction among the wet mass during extrusion. Also, the support stress was found to be proportional to the compression pressure without a binder, although an inflection point appeared on the support stress curve when a binder was present. This inflection point suggested large water retention of the wet kneaded mass, at which the medium of pressure was changed from a discontinuous solid powder to a continuous liquid, and large water retention contributed to the low friction of the wet mass. The friction of the wet kneaded mass and the aptitude of the formulation for extrusion were understood by using the compression test. The compression test is a very useful procedure at the first stage of a formulation study.     

Reaction of azole condensed quinoxaline N-oxides with acetic anhydride

The reaction of 7-chlorotetrazolo[1,5-α]quinoxaline 5-oxide 6a with acetic anhydride gave 7-chloro-5-(7-chlorotetrazolo[1,5-α]quinoxalin-4-yl)-4,5-dihydro-4-oxotetrazolo[1,5-α]quinoxaline 7a , while the reaction of 7-chloro-1,2,4-triazolo[4,3-α]quinoxaline 5-oxide 6b with acetic anhydride afforded 7-chloro-5-(7-chloro-1,2,4-triazolo[4,3-α]quinoxalin-4-yl)-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 7b and 7-chloro-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 8b . The reaction of compound 6a or 6b with acetic anhydride/acetic acid provided 7-chloro-4,5-dihydro-4-oxo-tetrazolo[1,5-α]quinoxaline 8a or compound 8b , respectively.     

Effect of surface covering of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effect of the surface covering of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate was investigated. Lactose carrier surfaces were covered with sucrose tristearate (J-1803F) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with various particle surface conditions prepared by surface covering. These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covering lactose carrier were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. In vitro inhalation properties increased with the percentage of J-1803F added. Using this surface covering system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles.     

Influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier

The influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier was investigated. In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with different particle surface conditions prepared by surface covering. Lactose carrier surfaces were covered with vegetable magnesium stearate (Mg-St-V) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covered lactose carrier were little decreased with increased in relative humidity (RH), showing that the in vitro inhalation properties of salbutamol sulfate were improved at high RH. Using this surface covering technique would thus be valuable for storage humidity of dry powder inhalation (DPI) with lactose carrier particles.     

Synthetic alpha-mannosyl ceramide as a potent stimulant for an NKT cell repertoire bearing the invariant Valpha19-Jalpha26 TCR alpha chain

A NKT cell repertoire is characterized by the expression of the Valpha19-Jalpha26 invariant TCR alpha chain (Valpha19 NKT cell). This repertoire, as well as a well-established Valpha14-Jalpha281 invariant TCR alpha(+) NKT cell subset (Valpha14 NKT cell), has been suggested to have important roles in the regulation of the immune system and, thus, is a major therapeutic target. Here, we attempted to find specific antigens for Valpha19 NKT cells. Valpha19 as well as Valpha14 NKT cells exhibited reactivity to alpha-galactosyl ceramide (alpha-GalCer). Thus, a series of monoglycosyl ceramides with an axially oriented glycosidic linkage between the sugar and ceramide moiety were synthesized and their antigenicity to Valpha19 NKT cells was determined by measuring their immune responses in culture with glycolipids. Comprehensive examinations revealed substantial antigenic activity for Valpha19 NKT cells by alpha-mannosyl ceramide.     

Structural analysis of amylose tris(3,5-dimethylphenylcarbamate) by NMR relevant to its chiral recognition mechanism in HPLC

The structural analysis of amylose tris(3,5-dimethylphenylcarbamate) (ADMPC) was performed by NMR spectroscopy using a sample with a lower degree of polymerization in order to understand the chiral recognition mechanism when it was used as a chiral stationary phase (CSP) in high-performance liquid chromatography (HPLC). ADMPC exhibited chiral discrimination for many enantiomers, including 1-(9-anthryl)-2,2,2-trifluoroethanol (1) and 1,1'-bi-2-naphthol (2) in both NMR and HPLC. A good agreement was observed between the HPLC and NMR results when chloroform was employed as the common solvent. The structure of ADMPC in solution was investigated by NMR using the 2D NOESY technique coupled with computer modeling, and a left-handed 4/3 helical structure was obtained as the most probable one. The binding geometry between ADMPC and the enantiomers of 1 was also investigated by (1)H NMR titration. On the basis of these results combined with molecular modeling, a rational model to explain the chiral discrimination mechanism of 1 on ADMPC was proposed.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.     

The effect of the steric hindrance on metallic cation conduction in polymer electrolytes

2,6-Di-t-butylphenol and oligo(ethylene oxide) bound covalently to polyisocyanate were synthesized and characterized. The ionic conductivities of their Li, Na, and K phenolates were studied at various temperatures. The conductivities were in the range of 10^?7?10^?5 S/cm at 30°C. The conductivity of Na and K salts was approximately 10² greater than that of the Li salts. The t-butyl groups serve to dissociate K and Na ions from the phenoxide. The cations, therefore, are more mobile as a result increasing the conductivity. The temperature dependence of ionic conductivity suggests that the migration of ions is controlled by segmental motion of the polymer, shown by linear curves obtained in Vogel–Tammann–Fulchere plots. The polyisocyanate backbone is a rather stiff structure, however, a flexible oligo(ethylene oxide) side chain forms complexes with metal ion. Since the ion transport is associated with the local movement of polymer segments, the rigidity of the polymer backbone does not have much influence on the ion mobility.     

NMR studies of phosphinenickel(0) complexes of ethyl methacrylate Ni(PR3)2(CH2=C(CH3)COOC2H5)

¹³C NMR data are given for a series of phosphinenickel(0) complexes of ethyl methacrylate (ema), Ni(PR₃)₂(CH₂=C(CH₃)COOC₂H₅) (PR₃ = PPh₃ (Ia), PEtPh₂ (Ib), PEt₂Ph (Ic), PMe₂Ph (Id), PEt₃ (Ie)). The olefinic carbon signals of ema shift upfield by 71.5–86.5 ppm on coordination, the magnitude of the upfield shift increasing with increase in the bacisity of the phosphine ligand. The effect of the basicity of PR₃ is discussed on the basis of the back-bonding from Ni to ema. Variable temperature¹H NMR studies reveal that the ema of Id, the complex having the least sterically demanding phosphine ligands, exchanges with free ema in toluene on the NMR time scale. The dependence of the rate of exchange on the concentration of ema shows that the exchange proceeds through anS_N2 mechanism. The activation parameters are: ΔH₂₇₃^≠ 2.75 kcal/mol, ΔG₂₇₃^≠ 12.7 kcal/mol, ΔS₂₇₃^≠ ?37 e.u. The³¹P NMR spectra of the complexes show two doublets when the exchange is frozen out, indicating the inequivalence of the two phosphine ligands in the ema-coordinated complex. The difference in the³¹P chemical shifts of the two coordinated tertiary phosphines increases with increase in the basicity of the PR₃ ligand.     

Synthesis and tautomeric behavior of 3-(pyrazolylhydrazonomethyl)-2-oxo-1, 2-dihydroquinoxalines. Specification of hydrazone imine and diazenyl enamine forms

3-(Pyrazolylhydrazonomethyl)-2-oxo-1, 2-dihydroquinoxalines were synthesized, and their tautomer ratios between hydrazone imine and diazenyl enamine forms were specified by pmr spectral data.