Upper limit of enhancement of boiling heat transfer in a narrow vertical rectangular channel due to passing bubbles

An experimental study has been made of saturated boiling heat transfer for water and R113 in a narrow vertical rectangular channel (2 mm space, 20 mm wide, and 200 mm long) at atmospheric pressure, in which the vertical heated surface (10 mm long and 20 mm wide) is located on one side at a position of 150 mm from its entrance and bubbles are forcibly passed through it at a designated period from 0.33 to 1.0 sec. The experiment shows that the heat transfer coefficients are increased by the bubble passing through the heated surface for the value of thermal diffusivity,a, times period, T₀, of the passing bubbles above about 6×10^–9 m² (a T ₀>6×10^–9 m²) while fora T ₀< 6×10^–9 m², the heat transfer coefficients become independent of the period and the effectiveness of the enhancement of the heat transfer owing to the passing bubble disappears.

---

Die obere Grenze der Verbesserung des Wärmeübergangs beim Sieden in einem vertikalen, rechteckigen Kanal infolge von aufsteigenden Blasen

Zusammenfassung Es wurden Experimente über den Wärmeübergang beim Sättigungssieden mit Wasser und R113 in einem engen, vertikalen, rechteckigen Kanal (2 mm Abstand, 20 mm Breite und 200 mm Länge) bei Umgebungsdruck durchgeführt, wobei die vertikale, beheizte Oberfläche (10 mm lang und 20 mm breit) auf der einen Seite in einem Abstand von 150 mm vom Eintritt angeordnet ist und die Blasen zwangsweise durch den Kanal sich mit einem Periodenabstand von 0,033 bis 1,0 s bewegen. Das Experiment zeigt, daß die Wärmeübergangskoeffizienten durch das Vorbeistreichen der Blasen an der beheizten Oberfläche verbessert werden, wenn das Produkt aus Temperaturleitfähigkeit,a, mal der Periode, T₀, der vorbeistreichenden Blasen größer als 6×10^–9 m² liegt, während unterhalb dieses Wertes der Wärmeübergangskoeffizient unabhängig von der Blasenperiode ist und die Effektivität der Wärmeübergangsverbesserung infolge der Blasenströmung verschwindet.

---

Nomenclature a thermal diffusivity of liquid - ¯h time-averaged heat transfer coefficient - q _w heat flux at wall - T ₀ period of passing bubble - T _w(t) temperature of heated surface - T _w amplitude of heated surface temperature Greek symbols thermal conductivity - thickness of liquid film     

Computational study on the interactions of mustard gas with cucurbituril macrocycles

The study on the absorption of toxic gases such as mustard gas by organic host is essential to the development of inexpensive detection and decontamination equipments. Using quantum chemical methods, we propose cucurbituril as an effective host to capture mustard gas. It was found that stable complexes are formed with the inclusion of the toxic gas molecules inside the cucurbituril cavity, compared with the lateral and exterior interactions. Oxygen mustard has a comparable binding energy with sulfur mustard and hence can be used during experimental investigation. Additionally, during the inclusion complex formation, the presence of heteroatoms helps the guest molecules to undergo a larger structural reorganization to get accommodated inside the cucurbituril macromolecule. Atoms‐in‐molecules analysis shows the existence of strong intermolecular CH…O bonding between the guest molecules and cucurbituril macromolecule. The presence of an intramolecular CH…Cl type of bonding accounts for the higher stabilization of sulfur mustard inside the cucurbituril macromolecule. © 2015 Wiley Periodicals, Inc.     

The Critical Effect of Niobium Doping on the Formation of Mesostructured TiO2: Single‐Crystalline Ordered Mesoporous Nb‐TiO2 and Plate‐like Nb‐TiO2 with Ordered Mesoscale Dimples

Highly ordered mesoporous niobium‐doped TiO₂ with a single‐crystalline framework was prepared by using silica colloidal crystals with ca. 30 nm in diameter as templates. The preparation of colloidal crystals composed of uniform silica nanoparticles is a key to obtain highly ordered mesoporous Nb‐doped TiO₂. The XPS measurements of Nb‐doped TiO₂ showed the presence of Nb⁵⁺ and correspondingly Ti³⁺. With the increase in the amount of doped Nb, the crystalline phase of the product was converted from rutile into anatase, and the lattice spacings of both rutile and anatase phases increased. Surprisingly, the increase in the amount of Nb led to the formation of plate‐like TiO₂ with dimpled surfaces on one side, which was directly replicated from the surfaces of the colloidal silica crystals.     

Asymptotic Behavior of Solutions of the Compressible Navier-Stokes Equations on the Half Space

Asymptotic behavior of solutions of the compressible Navier-Stokes equations on the half space R ⁿ₊(n≥2) is considered around a given constant equilibrium. A solution formula for the linearized problem is derived, and L^p estimates for solutions of the linearized problem are obtained for 2≤p≤∞. It is shown that, as in the case of the Cauchy problem, the leading part of the solution of the linearized problem is decomposed into two parts, one that behaves like diffusion waves and the other one purely diffusively. There, however, are some aspects different from the Cauchy problem, especially in considering spatial derivatives. It is also shown that the solution of the linearized problem approaches for large times the solution of the nonstationary Stokes problem in some L^p spaces; and, as a result, a solution formula for the nonstationary Stokes problem is obtained. Large-time behavior of solutions of the nonlinear problem is then investigated in L^p spaces for 2≤p≤∞ by applying the results on the linearized analysis and the weighted energy method. The results indicate that there may be some nonlinear interaction phenomena not appearing in the Cauchy problem.     

Control of peroxyoxalate chemiluminescence by nitrogen-containing ligand quenching: turning off and on by ligand-metal ion host-guest interactions

The control of peroxyoxalate chemiluminescence (PO-CL) by the coordination of nitrogen-containing ligands and metal cations was investigated. Turning the CL off and on was done by PO-CL using 15-monoazacrown-5-tethered anthracene and alkali metal ions. CL quenching and regeneration was also observed in the separated molecular system of 15-monoazacrown-5 and the fluorophores. CL quenching by a number of ligands bearing dipicolylamino groups was evaluated by these PO-CL reactions and found to be closely related to their oxidation potentials, which is dependent on the Weller rate law for electron exchange and this provides strong support for the existence of the CIEEL PO-CL process. When Zn²⁺ or Cu²⁺ are added to the PO-CL system quenched by the ligand, N-[2-(2,2′-dipicolylamino)ethyl]aniline, CL was turned on because the electron donating ability of the ligands was modulated. This was controlled by the coordination of the studied metal ions and, therefore, this system results in CL because of host-guest interactions.     

Binding of metal ions by pyrimidine base pairs in DNA duplexes

Pyrimidine base pairs in DNA duplexes selectively capture metal ions to form metal ion-mediated base pairs, which can be evaluated by thermal denaturation, isothermal titration calorimetry, and nuclear magnetic resonance spectroscopy. In this critical review, we discuss the metal ion binding of pyrimidine bases (thymine, cytosine, 4-thiothymine, 2-thiothymine, 5-fluorouracil) in DNA duplexes. Thymine-thymine (T-T) and cytosine-cytosine (C-C) base pairs selectively capture Hg(II) and Ag(I) ions, respectively, and the metallo-base pairs, T-Hg(II)-T and C-Ag(I)-C, are formed in DNA duplexes. The metal ion binding properties of the pyrimidine-pyrimidine pairs can be changed by small chemical modifications. The binding selectivity of a metal ion to a 5-fluorouracil-5-fluorouracil pair in a DNA duplex can be switched by changing the pH of the solution. Two silver ions bind to each thiopyrimidine-thiopyrimidine pair in the duplexes, and the duplexes are largely stabilized. Oligonucleotides containing these bases are commercially available and can readily be applied in many scientific fields (86 references).     

Non-surface activity and micellization behavior of cationic amphiphilic block copolymer synthesized by reversible addition-fragmentation chain transfer process

Cationic amphiphilic diblock copolymers of poly(n-butylacrylate)-b-poly(3-(methacryloylamino)propyl)trimethylammonium chloride) (PBA-b-PMAPTAC) with various hydrophobic and hydrophilic chain lengths were synthesized by a reversible addition-fragmentation chain transfer (RAFT) process. Their molecular characteristics such as surface activity/nonactivity were investigated by surface tension measurements and foam formation observation. Their micelle formation behavior and micelle structure were investigated by fluorescence probe technique, static and dynamic light scattering (SLS and DLS), etc., as a function of hydrophilic and hydrophobic chain lengths. The block copolymers were found to be non-surface active because the surface tension of the aqueous solutions did not change with increasing polymer concentration. Critical micelle concentration (cmc) of the polymers could be determined by fluorescence and SLS measurements, which means that these polymers form micelles in bulk solution, although they were non-surface active. Above the cmc, the large blue shift of the emission maximum of N-phenyl-1-naphthylamine (NPN) probe and the low micropolarity value of the pyrene probe in polymer solution indicate the core of the micelle is nonpolar in nature. Also, the high value of the relative intensity of the NPN probe and the fluorescence anisotropy of the 1,6-diphenyl-1,3,5-hexatriene (DPH) probe indicated that the core of the micelle is highly viscous in nature. DLS was used to measure the average hydrodynamic radii and size distribution of the copolymer micelles. The copolymer with the longest PBA block had the poorest water solubility and consequently formed micelles with larger size while having a lower cmc. The "non-surface activity" was confirmed for cationic amphiphilic diblock copolymers in addition to anionic ones studied previously, indicating the universality of non-surface activity nature.     

Confinement in carbon nanospace-induced production of KI nanocrystals of high-pressure phase

An outstanding compression function for materials preparation exhibited by nanospaces of single-walled carbon nanohorns (SWCNHs) was studied using the B1-to-B2 solid phase transition of KI crystals at 1.9 GPa. High-resolution transmission electron microscopy and synchrotron X-ray diffraction examinations provided evidence that KI nanocrystals doped in the nanotube spaces of SWCNHs at pressures below 0.1 MPa had the super-high-pressure B2 phase structure, which is induced at pressures above 1.9 GPa in bulk KI crystals. This finding of the supercompression function of the carbon nanotubular spaces can lead to the development of a new compression-free route to precious materials whose syntheses require the application of high pressure.     

"Click-made" biaryl-linker improving efficiency in protein labelling for the membrane target protein of a bioactive compound

We report on the design, synthesis and assessment of a novel biaryl-linked (BArL) molecular probe for the exploration of low-abundant target proteins for bioactive compounds based on the activity based protein profiling (ABPP) approach. Surprisingly, the performance of the BArL probe was better than that of the stepwise tagging approach that is considered to be the most effective method used in ABPP study.     

Image printing on the surface of anti-biofouling zwitterionic polymer brushes by ion beam irradiation

A CMB monomer was polymerized on a glass plate with a surface-confined ATRP initiator containing a 2-bromoisobutyryl group. The glass plate modified with a PCMB brush was highly hydrophilic and showed a strong resistance against non-specific adsorption of proteins and cell adhesion. Upon ion beam irradiation, furthermore, the PCMB brush was ablated and a hollow space with a designed shape could be made to which HEK293 cells (from human embryonic kidney) and Hep G2 (from human hepatoma) cells non-specifically adhered, while no adhesion of these cells to the non-treated area on the brush was observed. The present results clearly indicate the usefulness of ion beam-printed patterns of anti-biofouling zwitterionic polymer brushes in the biomedical field.