Development of a chemical vapor sensor using piezoelectric quartz crystals with coated unusual lipids

Piezoelectric quartz crystal sensors were developed using lipids with various properties for highly sensitive detection of chemical vapors. Lipids with varying lengths of alkyl chains were coated onto 10 MHz AT-cut quartz crystal resonators and the response of these modified crystals to chemical vapors were measured. It was shown that hydrophilic compounds, such as ethanol and methanol, could be recognized efficiently by lipids having shorter alkyl chains, whereas lipids with longer alkyl chains showed affinity to more hydrophobic vapors, such as toluene, hexane and cyclohexane. Frequency changes caused by adsorption of alcohols could be enhanced when cholesterol was co-immobilized in the lipid layer. To confirm the assumption that the sensor-response might be affected by the properties of lipids derived from acyl chains, we have examined the effects of two types of newly synthesized unusual lipids on sensor response. When lipids having one triple bond each at different positions on their alkyl chains were coated onto quartz crystals separately, lower responses were observed compared to responses obtained for a sensor with immobilized, saturated phosphatidylcholine. Lipids containing -branched acyl chains, however, showed good affinity for organic vapors, and sensor responses improved 4–5-fold. Moreover, these sensors were shown to have sensitivity of the same order as the humans' sense of smell (10⁻⁵–10⁻⁶ w/w in liquid paraffin) when measured using standard odorants (isovaleric acid, skatole, etc.) for an olfactometry established in Japan.     

The effect of the counteranion on the formation of mesoporous materials under the acidic synthesis process

The presence of various counteranions at the interfacial region of the silicate-surfactant mesophase introduces opportunities for manipulation of the phase structure. Well-ordered 3D-hexagonal P63/mmc, cubic Pmn, 2D-hexagonal p6mm, and cubic Iad mesoporous materials have been synthesized with the same surfactant, cetyltriethylammonium bromide, in the presence of various acids. The counteranions of acidic media have resulted in increasing the surfactant packing parameter g in the order SO42- < Cl- < Br- < NO3-, which leads to the different time course of formation of mesostructures. The effect of counteranions on the formation of mesostructures is explained in terms of not only the adsorption strength on the headgroups of the surfactant micelle but also the rate of silica condensation affecting the charge density matching between the surfactant and silica. It has been found that the mesophase is always transformed from the larger g parameter into the smaller one. The distinct morphologies of the 3D-hexagonal P63/mmc mesophases have been rationally explained by supposing this particular mesostructure. The cubic Iad phase has been first synthesized under acidic conditions.     

Sidewall functionalization of single-walled carbon nanotubes through electrophilic addition

Electrophilic addition of chloroform to SWNTs followed by hydrolysis resulted in the addition of hydroxy groups to the surface of the nanotubes; further esterification with propionyl chloride led to the corresponding ester derivatives, which allowed us to identify their structure, also providing better solubility in organic solvents.     

Asymmetric cyclization of 2-alkenylphenols. A comparative study on the use of palladium(II) and titanium(IV) complexes

The oxidative cyclization of 2-(3-pentenyl)phenol catalyzed by [(η³-pinene)PdOAc]₂ gives optically active (+)-2-vinylchroman (25% e.e.), while (−)-2-(1-hydroxyethyl)chroman (56% e.e.) is formed as a single diastereomer upon treatment with t-BuOOH in the presence of Ti(OⁱPr)₄ and -(+)-diethyl tartrate. 2-(2-Butenyl)phenol also undergoes the Ti-promoted asymmetric cyclization to give (2S,1′R)-(−)-2-(1-hydroxyethyl)-2,3-dihydrobenzofuran (29% e.e.).     

Cross‐sectional structural characterization of the surface of exfoliated HOPG using HRTEM‐EELS

We analyzed the surface atomic structure of highly oriented pyrolytic graphite (HOPG) substrate exfoliated with adhesive tape, using high‐resolution transmission electron microscopy and scanning transmission electron microscopy‐electron energy‐loss spectroscopy (STEM‐EELS). The surface step height of the exfoliated HOPG substrate was determined using high‐angle annular dark‐field‐scanning transmission electron microscopy (HAADF‐STEM) images and the depth profiles of the EELS spectra of a cross‐sectioned thin foil specimen prepared via focused ion beam milling. The exfoliated surface of the HOPG substrate presented disordered and curved graphene layers. The STEM‐EELS measurements indicated that upon exfoliation, the surface of the HOPG substrate reacted with atmospheric water and oxygen molecules.     

Liquid phase formation of alkyl- and perfluoro-phosphonic acid derived monolayers on magnesium alloy AZ31 and their chemical properties

Alkyl- and perfluoro-phosphonic acid derived SAMs were successfully formed on Mg alloy by liquid phase method for the first time. The chemical and anticorrosive properties of the prepared SAMs on magnesium alloys were characterized using contact angle measurements, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and electrochemical measurements. Water contact angle measurements revealed that the maximum advancing/receding water contact angles of n-octyl (OP: CH(3)(CH(2))(7)PO(OH)(2)), n-dodecyl (DP: CH(3)(CH(2))(11)PO(OH)(2)), n-octadecyl (ODP: CH(3)(CH(2))(17)PO(OH)(2)) phosphonic acid, and 2-(perfluorohexyl)ethyl (PFEP: CF(3)(CF(2))(5)CH(2)CH(2)PO(OH)(2)) phosphonic acid were 105.1/64.7°, 108.3/69.6°, 111.9/75.2°, and 115.2/67.4° respectively. In the case of alkylphosphonic acid SAMs (OP, DP, and ODP), the advancing and receding water contact angles increased with an increase in the preparation time. The angle-resolved XPS (AR-XPS) data revealed that the film thicknesses of the OP, DP, ODP, PFEP on Mg alloy were estimated to be 0.8, 1.2, 1.7, and 1.1 nm, respectively. The XPS O 1s data support that the phosphonic acid derived SAM is covalently bound to the oxide or hydroxide surface of the Mg alloy in a monodenate or bidenate manner. Chemical stability of the alkyl- and perfluoro-phosphonic acid modified Mg alloy surfaces was investigated using aqueous solutions at pH=4.0, 7.0, and 10.0. The contact angles of OP, DP, and PFEP modified Mg surface decreased rapidly within the first 5 min after immersion in all the aqueous solutions and were less than 20°. On the other hand, the contact angles of the ODP modified Mg alloy after immersion in aqueous solutions at pH 4, 7 and 10 for 5 min were 45.1°, 89.3,° and 85.5°, respectively. The ODP modified Mg alloy had highest chemical stability in four types of the phosphonic acid derived SAMs used in this study, indicating that the molecular density of ODP on Mg alloy would be higher than those of OP, DP, PFEP on Mg alloy. The corrosion resistance of ODP modified Mg alloy was investigated by potentiodynamic polarization curve measurements. The ODP modified Mg alloy exhibits protective properties in a solution containing Cl(-) ions compared to unmodified Mg alloy.     

The smallest stable fullerene, M@C28 (m = Ti, Zr, U): stabilization and growth from carbon vapor

The smallest fullerene to form in condensing carbon vapor has received considerable interest since the discovery of Buckminsterfullerene, C(60). Smaller fullerenes remain a largely unexplored class of all-carbon molecules that are predicted to exhibit fascinating properties due to the large degree of curvature and resulting highly pyramidalized carbon atoms in their structures. However, that curvature also renders the smallest fullerenes highly reactive, making them difficult to detect experimentally. Gas-phase attempts to investigate the smallest fullerene by stabilization through cage encapsulation of a metal have been hindered by the complexity of mass spectra that result from vaporization experiments which include non-fullerene clusters, empty cages, and metallofullerenes. We use high-resolution FT-ICR mass spectrometry to overcome that problem and investigate formation of the smallest fullerene by use of a pulsed laser vaporization cluster source. Here, we report that the C(28) fullerene stabilized by encapsulation with an appropriate metal forms directly from carbon vapor as the smallest fullerene under our conditions. Its stabilization is investigated, and we show that M@C(28) is formed by a bottom-up growth mechanism and is a precursor to larger metallofullerenes. In fact, it appears that the encapsulating metal species may catalyze or nucleate endohedral fullerene formation.     

Synthesis and structural revision of marine eicosanoid agardhilactone

Synthesis of the marine eicosanoid agardhilactone has been achieved. The relative and absolute configuration of agardhilactone was successfully determined.     

Versatile glycoblotting nanoparticles for high-throughput protein glycomics

We have developed an effective and practical trap-and-release method based on chemoselective ligation of carbohydrates with reactive aminooxyl groups attached to the surface of nanoparticles (referred to as glycoblotting nanoparticles). These glycoblotting nanoparticles were synthesized by UV irradiation of diacetylene-functionalized lipids that contain the aminooxyl group. The glycoblotting nanoparticles captured carbohydrates in aqueous solution under mild conditions and were collected by simple centrifugation. The trapped carbohydrates were effectively released from the nanoparticles under acidic conditions to give pure oligosaccharides. This glycoblotting process reduced the time required for the purification process of carbohydrates to less than 6 h, compared to the several days needed for conventional chromatographic techniques. The oligosaccharides (N-glycan) were released from ovalbumin (glycoprotein) by PNGase F after tryptic digestion. MALDI-TOF mass spectra before purification did not show any significant signals corresponding to N-glycans because these signals were hidden by the large signals of the abundant peptides. However, after purification with the glycoblotting nanoparticles, only signals corresponding to oligosaccharides appeared. We also demonstrated a clear analysis of the oligosaccharides contained in the mice dermis by means of glycoblotting.