Chemical and optical control of peristaltic actuator based on self-oscillating porous gel

We demonstrate the chemical and optical control of the self-sustaining peristaltic motion of a structural colored porous hydrogel.     

The glass transition and dielectric secondary relaxation of fructose-water mixtures

Broad-band dielectric measurements for fructose-water mixtures with fructose concentrations between 70.0 and 94.6 wt% were carried out in the frequency range of 2 mHz to 20 GHz in the temperature range of -70 to 45 degrees C. Two relaxation processes, the alpha process at lower frequency and the secondary beta process at higher frequency, were observed. The dielectric relaxation time of the alpha process was 100 s at the glass transition temperature, T(g), determined by differential scanning calorimetry (DSC). The relaxation time and strength of the beta process changed from weaker temperature dependences of below T(g) to a stronger one above T(g). These changes in behaviors of the beta process in fructose-water mixtures upon crossing the T(g) of the mixtures is the same as that found for the secondary process of water in various other aqueous mixtures with hydrogen-bonding molecular liquids, polymers, and nanoporous systems. These results lead to the conclusion that the primary alpha process of fructose-water mixtures results from the cooperative motion of water and fructose molecules, and the secondary beta process is the Johari-Goldstein process of water in the mixture. At temperatures near and above T(g) where both the alpha and the beta processes were observed and their relaxation times, tau(alpha) and tau(beta), were determined in some mixtures, the ratio tau(alpha)/tau(beta) is in accord with that predicted by the coupling model. Fixing tau(alpha) at 100 s, the ratio tau(alpha)/tau(beta) decreases with decreasing concentration of fructose in the mixtures. This trend is also consistent with that expected by the coupling model from the decrease of the intermolecular coupling parameter upon decreasing fructose concentration.     

One-pot solid-phase glycoblotting and probing by transoximization for high-throughput glycomics and glycoproteomics

The development of rapid and efficient methods for high-throughput protein glycomics is of growing importance because the glycoform-focused reverse proteomics/genomics strategy will greatly contribute to the discovery of novel biomarkers closely related to cellular development, differentiation, growth, and aging as well as a variety of diseases such as cancers and viral infection. Recently, we communicated that rapid and efficient purification of carbohydrates can be achieved by employing sugar-specific chemical ligation with aminooxy-functionalized polymers, which we termed "glycoblotting" (see S.-I. Nishimura et al., Angew. Chem. 2005, 117, 93-98; Angew. Chem. Int. Ed. 2005, 44, 91-96). The chemoselective blotting of oligosaccharides present in crude biological materials onto synthetic polymers relies on the unique oxime-bond formation between aminooxy group displayed on the supporting materials and aldehyde/ketone group at the reducing terminal of all oligosaccharides, thus enabling highly selective and rapid oligosaccharide purification. Aiming to improve the detection sensitivity of the released oligosaccharides, we introduce here a novel strategy for one-pot solid-phase glycoblotting and probing by transoximization. We found that oligosaccharides captured by the polymer supports via the oxime bond can be released in the presence of excess O-substituted aminooxy derivatives in a weakly acidic condition. The released oligosaccharides could be recovered as newly formed oxime derivatives of the O-substituted aminooxy compound added, thus demonstrating the simultaneous releasing and probing. In addition, we synthesized a novel aminooxy-functionalized monomer, N-[2-[2-(2-tert-butoxycarbonylaminooxyacetylamino-ethoxy)ethoxy]ethyl]-2-methacrylamide, which allows for the large-scale preparation of a versatile polymer characterized by its high stability, high blotting capacity, and easy use. The one-pot protocol allowed to profile 23 kinds of N-glycan chains of human serum glycoproteins. This concept was further applied for the glycopeptides analysis in a crude mixture followed by galactose oxidase treatment to generate free aldehyde group at the non-reducing terminal of oligosaccharide moiety of glycopeptides. Our technique may be implemented in existing biochemistry and molecular diagnostics laboratories because enriched oligosaccharides and glycopeptides by solid-phase transoximization with high-sensitive labeling reagents are widely applicable in a variety of common analytical methods using two-dimensional HPLC, LC/MS, and capillary electrophoresis as well as modern mass spectrometry.     

Kinetic investigations of the process of encapsulation of small hydrocarbons into a cavitand-porphyrin

Exchange of guest molecules into capsule shaped host molecules is the most fundamental process in host-guest chemistry. Several examples of quantitative measurements of guest exchange rates have been reported. However, there have been no reports on the activation energies of these processes. A molecule known as cavitand-porphyrin (H2CP) has been reported to have a flexible host structure capable of facilitating moderate guest exchange rates suitable for kinetic measurements of the guest exchange process with 1H NMR. In this article, various kinetic and thermodynamic parameters related to the process of encapsulation of small hydrocarbons into H2CP in CDCl3 solution were determined by 2D exchange spectroscopy (EXSY): association and dissociation rate constants (k(ass) = 320 M-1 s-1, k(diss) = 1.4 s-1 for methane at 25 degrees C), the corresponding activation energies (E(a,ass) = 27 kJ.mol-1, E(a,diss) = 58 kJ.mol-1), and thermodynamic parameters for each process (DeltaG++(ass) = 59 kJ.mol-1, DeltaG++(diss) = 72 kJ.mol-1, DeltaH++(ass) = 25 kJ.mol-1, DeltaH++(diss) = 55 kJ.mol-1, DeltaS++(ass) = -113 J.K-1.mol-1, and DeltaH++(diss) = 58 J.K-1.mol-1 for methane). The thermodynamic parameters (DeltaG degrees = -13 kJ.mol-1, DeltaH degrees = -31 kJ.mol-1, DeltaS degrees = -60 J.K-1.mol-1 for methane) for this encapsulation equilibrium determined by EXSY were comparable to those for methane determined by 1D 1H NMR titration (DeltaG degrees = -11 kJ.mol-1, DeltaH degrees = -33 kJ.mol-1, DeltaS degrees = -75 J.K-1.mol-1 for methane). In addition, the structure of the methane encapsulation process was revealed by ab initio MO calculations. The activation energies for methane association/dissociation were estimated from MP2 calculations (E(a,ass) = 58.3 kJ.mol-1, E(a,diss) = 89.1 kJ.mol-1, and DeltaH degrees = -30.8 kJ.mol-1). These values are in accord with the experimentally determined values. The observed guest exchange rates and energies are compared with the corresponding values of various reported capsule-shaped hosts.     

Label-free detection of protein-protein interactions at the GaAs/water interface through surface infrared spectroscopy: discrimination between specific and nonspecific interactions by using secondary structure analysis

Here, we propose a label-free detection of protein-protein interactions that enables simultaneous qualitative analysis of target proteins by using Fourier transform infrared (FTIR) absorption spectroscopy in multiple internal reflection geometry (MIR-FTIR). Using this method, the target proteins were detected based on the peak height of the amide I and amide II bands, while discrimination of specific and nonspecific signals is made based on the secondary structure of the analytes, which is determined through second-derivative analysis of the amide I band. As a model system, an antigen peptide was immobilized on the surface of GaAs, which was transparent to mid-infrared light, and the interaction with its antibody was examined in aqueous media. We demonstrated that the binding of the antibody to the antigen immobilized on a GaAs surface selectively gave rise to beta-sheet amide I vibrations (1639 and 1690 cm-1), while no structurally related signals were induced by nonspecifically adsorbed proteins. The peak height of the beta-peak (1639 cm-1) in the amide I band linearly increased with the antiserum concentration as well as that of the amide II band. The detection limit (S/N = 3) was a 1:36 000 dilution for the amide I signal. In addition, through the use of surface-sensitive MIR-FTIR, the present sensor selectively detected the antigen-antibody interactions at the surfaces without being affected by the presence of bulk species, enabling rapid and wash-free detection. Our method provides not only rapid label-free detection of protein-protein interactions but a more accurate discrimination between specific and nonspecific interactions through the use of the secondary structure of the target proteins as a measure for the specific signals.     

Coulomb excitation of 74Ge beam

⁷⁴Ge beam was Coulomb-excited on a ^natPb target. Ten E2 matrix elements including diagonal matrix elements for 5 low-lying states have been determined using the least-squares search code GOSIA. The expectation values of the rotational invariants 〈Q ²〉 and 〈cos3δ〉 show the small and triaxial deformation of the two lowest members of the ground-state band , while the 0₂ ⁺ and 2₂ ⁺ states are found to be almost spherical. Received: 31 August 2000 / Accepted: 4 December 2000     

Fabrication and Patterning of Submierometer-Thick Optical Polarizing Films for 800 nm Using Stretched Silver Island Multilayers

Stretched silver island multilayers have been investigated for patterned optical polarizers for the wavelength of 800 nm. Submicrometer-thick optical polarizing films are fabricated by stretching periodic multilayers consisting of silver island layers and Pyrex layers at the temperature of 660°C. As the optical anisotropy of the optical polarizing film is lost by heating at a temperature higher than the stretching temperature, the fine non-polarizing areas can be deliberately and easily formed on the optical polarizing film by laser irradiation with high power density. We have successfully formed various non-polarizing areas on the optical polarizing film with a 1 W-class carbon dioxide laser. The demonstrated fabricating techniques of deliberately patterned optical polarizing films should be useful for novel optical computing and sensing devices.     

Negative pion transfer process in a hydrogen-containing gas mixture

Annihilation γ-rays of π⁰ and pionic X-rays were measured in the gas mixtures of H₂+Z and CH₄+Z systems (Z=He, Ne, Ar and Kr). Pion capture probability of hydrogen atom was obtained from the annihilation γ-ray counts and the capture probability of Z atom was obtained from the pionic X-ray intensities. Transfer rates were determined from the data based on a combined large mesomolecular model. The transfer rates obtained were smaller than the systematics of the Russian group. Difference in the transfer rate between the gas and the liquid phases was found by a comparison of the present results with our previous ones.