Crystal structures of Cr-based magnetic pyroxenes

Crystal structures of the Cr-based germanates: ACrGe₂O₆ (A = Li and Na) which show the specific magnetic properties, are solved using synchrotron powder-diffraction data at room temperature. Both compounds have isostructure which belongs to monoclinic C2/c with pyroxene-type structure. In both ACrGe₂O₆ structures, chromium atom forms the magnetic one-dimensional edge-shared CrO₆ chain. In the NaCrGe₂O₆ structure, the shortest Cr?Cr distance and Cr–O–Cr angle are both longer and wider compared to those in the LiCrGe₂O₆ structure. This behavior may give strong influence to the difference of their magnetic properties.     

Preparation of 3-(4-chlorophenyl)-2-(2-aminothiazol-4-yl)-5-methoxybenzo[b]furan derivatives and their leukotriene B(4) inhibitory activity

A series of 3-(4-chlorophenyl)-2-(2-aminothiazol-4-yl)benzo[b]furan derivatives 6-10 were prepared and their leukotriene B(4) inhibitory activity was evaluated. We found that several compounds showed strong inhibition of calcium mobilization in CHO cells overexpressing human BLT(1) and BLT(2) receptors. Among them, 3-(4-chlorophenyl)-2-[5-formyl-2-[(dimethylamino)methyleneamino]thiazol-4-yl]-5-methoxybenzo[b]furan 9b showed the most potent and selective inhibition for the human BLT(2) receptor, and its IC(50) value was smaller than that of the selected positive control compound, ZK-158252.     

N‐Boc‐Indolylbenzothiadiazole Derivatives: Efficient Full‐Color Solid‐State Fluorescence and Self‐Recovering Mechanochromic Luminescence

Herein, the solid‐state emission with good fluorescence quantum yields of N‐Boc‐indolylbenzothiadiazoles as a new class of fluorophores is described. Their solid‐state emission covers the wide range of the visible spectrum and the emission color can be tuned easily by changing the substituents on the two heteroaromatic rings. Among these, 3‐methylindolyl derivatives exhibit moreover autonomously self‐recovering mechanochromic luminescence, whereby the original solid‐state emission could be recovered spontaneously at room temperature after exposure to a mechanical stimulus. The emission color, as well as the recovery time for the color change could be tuned via the introduction of different substituents on the benzothiadiazole ring. We propose that the mechanism of the autonomously self‐recovering mechanochromic luminescence of 3‐methylindolylbenzothiadiazoles is based on a partial amorphization of the crystals upon exposure to the mechanical stimulus, followed by autonomous recovering in the form of recrystallization.     

Adsorption of Cu(II), Zn(II), Cd(II), Hg(II) and Pb(II) from aqueous solutions on a 2-mercaptobenzimidazole-modified silica gel

The chemically modified silica, obtained by reacting 2-mercaptobenz-imidazole with 3-chloropropyl silica gel, was used to adsorb Cu(II), Zn(II), Cd(II) and Pb(II) from aqueous solutions at various pH. Between pH 3–5, the order of selectivity was Hg(II) > Cd(II) Cu(II) Zn(II) Pb(II). Under batch conditions retentions of 100% were achieved for all metals except for Pb(II) where 93% was attained. Under column conditions recoveries of 100% were obtained for all metals.     

Synthesis and physical properties of high birefringence phenylacetylene liquid crystals containing a cyclohexyl group

We have synthesized new phenylacetylene-based liquid crystals containing a cyclohexyl or cyclohexylethyl group and evaluated their physical properties in order to develop a range of materials having high value of birefringence. The cyclohexyl-containing compounds exhibited nematic behaviour near room temperature and moderate values of δn of around 0.3. The cyclohexylethyl-containing compounds had a very wide nematic range with a high T_NI and very high values of δn of over 0.4. They also exhibited low viscosities. The order parameter was not affected by introducing either a cyclohexyl or a cyclohexylethyl group and the values of δn based on calculated polarizabilities were obtained experimentally.     

Stereospecific polymerization of 1‐hexene catalyzed by ansa‐metallocene/methylaluminoxane systems under high pressures

Stereospecific polymerization of 1‐hexene under high pressures (up to 1,000 MPa = ca. 10,000 atm) using metallocene/methylaluminoxane (MAO) catalysts was investigated. Several C₂‐symmetric ansa‐metallocenes, their meso‐isomers, and two C_s‐symmetric ansa‐metallocenes were employed as catalyst precursors. In the course of this study, novel C₂‐symmetric germylene‐bridged ansa‐metallocenes, (rac‐[Me₂Ge(η⁵‐C₅H‐2,3,5‐Me₃)₂MCl₂] (M = Zr, rac‐4a; M = Hf, rac‐4b), have been prepared. High pressures induced enhancement of the catalytic activity and the molecular weight of the polymers in most of the catalysts. The maximum of both the catalytic activity and the molecular weight of the polymers was mostly observed at 100–500 MPa in each catalyst, although the enhanced ratio was smaller than that observed for nonbridged metallocenes. Isospecificity of the C₂‐symmetric ansa‐metallocene catalysts was essentially maintained even under high pressure. Highly isotactic polyhexene ([mmmm] = 91.6%) with very high molecular weight (M_w = 2,360,000) was achieved by rac‐4b under 250 MPa. High pressures slightly decreased syndiotacticity when the C_s‐symmetric ansa‐metallocene, isopropylidene(1‐η⁵‐cyclopentadienyl)(9‐η⁵‐fluorenyl)zirconium dichloride 5, was employed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 283–292, 1999     

Color Tuning Mechanism of Human Red and Green Visual Pigments

We investigated the molecular mechanism of a rather large red shift of 31 nm in a human red pigment compared with a human green pigment. In this analysis, we paid special attention to the phenomenon of nonadditivity of spectral shifts due to substitution of the key amino acids (OH-bearing amino acids) and the phenomenon of cooperativity by which the spectral shifts due to substitution of the key amino acids in the protein environment of red pigment are about 1.5 times larger than that in the protein environment of green pigment. The analysis was made by using a model of three active sites on which the key amino acids are located and four effective sites by which the effect of the key amino acids is modified. As a result, we found that the interaction between the active sites that occurs through the repolarization of the chromophore induced by the key amino acid is essential for the nonadditivity phenomenon. We also found that the interaction between the active site and the effective site plays a major role in the cooperativity phenomenon. More directly, we say that the highly polarizable property of the chromophore is the origin of the rather large red shift in red pigment. Based on these analyses, we conclude that the interaction between the polarizable chromophore and the protein moiety has the capability of producing a significant spectral shift, at least 1000 cm-1, even by substitution of moderate polar residues of the OH-bearing amino acids.     

Highly increased breakdown potential of anodic films on aluminum using a sealed porous layer

The growth of a uniform barrier-type anodic film on aluminum is usually terminated by electric breakdown, which is controlled by the resistance of electrolyte or anion concentration. In this study, highly resistive porous layers have been introduced by anodizing aluminum in sulfuric acid electrolyte followed by boiling water treatment to examine their influence on the electric breakdown potential. The pores of the porous alumina film are sealed by forming hydrated alumina (pseudo-boehmite) after the boiling water treatment. The breakdown potential increases to over 1500 V for the pore-sealed aluminum specimens on anodizing in sodium tungstate electrolyte. The electrochemical impedance spectroscopy measurements revealed an increased resistance of the porous layer after the pore-sealing treatment. GDOES depth profile analysis disclosed that the sealed porous layer impedes the incorporation of tungsten species into the barrier layer. The introduction of a highly resistive layer that also suppresses the anion incorporation on aluminum is effective in increasing the breakdown potential of anodic films.     

Potentiometric study using chemically modified silica gel with pyridinium as membrane for ClO 4 − ions

A potentiometric sensor for the perchlorate anion was developed by mixing chemically modified silicagel with pyridinium perchlorate, with an epoxy polymer and graphite. The electrode showed Nernstian response between 1.0 × 10^–2 and 1.0 × 10^–3 M perchlorate concentrations. The electrode showed high selectivity to this ion at solutions pH between 5.5 and 8.0. The presence of IO ₄ ^– , NO ₃ ^– ,Br^–, IO ₃ ^– , Cl^– and SO ₄ ^2– ions in the solutions, had only small interference in the electrode response in the range mentioned.     

Gold nanoparticle/charged silsesquioxane films immobilized onto Al/SiO2 surface applied on the electrooxidation of nitrite

In this work, gold nanoparticles lower than 10?nm were prepared in an aqueous medium using two charged silsesquioxanes, the propylpyridinium chloride and propyl-1-azonia-4-azabicyclo[2.2.2]octane chloride, as stabilizer agents which revealed to be water-soluble. This stabilization method is innovative allowing thin films containing gold nanoparticles to be obtained, and it was used for the first time in the preparation of carbon paste electrodes (CPEs). The charged silsesquioxanes were characterized by liquid ¹³C NMR. The gold nanoparticle/silsesquioxane systems were characterized by ultraviolet–visible spectroscopy (UV–Vis) and transmission electron microscopy. In sequence, they were immobilized on silica matrix coated with aluminum oxide. The resulting solid materials designated as Au-Py/AlSi and Au-Db/AlSi were characterized by infrared spectroscopy and N₂ adsorption/desorption isotherms. The results showed that the gold nanoparticle/silsesquioxane systems are strongly adhered to the surface-forming thin films. The Au-Py/AlSi and Au-Db/AlSi materials were used to prepare CPEs for the electrooxidation of nitrite (NO ₂ ^? ) using cyclic voltammetry and differential pulse voltammetry. The Au-Py/AlSi and Au-Db/AlSi CPEs showed high sensitivity and detection limits of 71.87 and 53.66?μA?mmol^–1?L and 1.3 and 3.0?μmol?L^–1, respectively.