Wetting of surfactant solutions by alkanes.

Ellipsometry, surface tensiometry, and contact-angle measurement have been used to study the transition between partial wetting and pseudo-partial wetting of surfactant solutions by alkanes. In the partial wetting regime, the air-water surface tension is the same with and without alkane. In the pseudo-partial wetting regime, the air-water surface tension is lowered by the presence of alkane, showing that oil is solubilised into the surfactant monolayer. A discontinuous change in the coefficient of ellipticity with increasing surfactant concentration provides unequivocal evidence for the first-order nature of the wetting transitions. Ellipsometry has been used to explore the generality of wetting transitions of alkanes (dodecane, hexadecane, and squalane) on surfactant solutions [dodecyltrimethylammonium bromide, tetredecyltrimethylammonium bromide, dibucaine hydrochloride, and Aerosol OT (AOT)]. Of the systems studied, only hexadecane on AOT solutions did not show a wetting transition. Excess alkane remains as a lens on the surface of the surfactant solutions at all concentrations, but the contact angle is a minimum at the wetting transition. A semiquantitative model for the variation of the contact angle with surfactant concentration is provided.     

Synthesis of 2-, 4- and 5-(2-alkylcarbamoyl-1-methylvinyl)-7-alkyloxybenzo[b]furans and their leukotriene B4 receptor antagonistic activity

Variable benzo[b]furan derivatives having (E)- and (Z)-2-alkylcarbamoyl-1-methylvinyl groups at the 2-, 4- and 5-positions and a carboxylpropoxy or (1-phenyl)ethoxy group at the 7-position were prepared to find novel and selective leukotriene B4(LTB4) receptor antagonists. (E)-2-(2-diethylcarbamoyl-1-methylvinyl)-7-(1-phenylethoxy)benzo[b]furan (4v) showed selective inhibition to the human BLT2 receptor (hBLT2). On the other hand, (E)-2-acetyl-4-(2-diethylcarbamoyl-1-methylvinyl)-7-(1-phenylethoxy)benzo[b]furan (7v) inhibited both human BLT(1) receptor (hBLT1) and hBLT2. The (E)-2-(2-diethylcarbamoyl-1-methylvinyl) group lay on approximately the same plane as the benzo[b]furan ring, whereas the (E)-4-(2-diethylcarbamoyl-1-methylvinyl) group had the torsion angle (45.7 degree) from the benzo[b]furan ring plane. However, the (Z)-(2-alkylcarbamoyl-1-methylvinyl)benzo[b]furans were inactive. The inhibitory activity depended on the conformation of the 2-diethylcarbamoyl-1-methylvinyl group.     

Effect of omega-hydrogenation on the adsorption of fluorononanols at the hexane/water interface: pressure effect on the adsorption of fluorononanols

The interfacial tension gamma of the hexane solution of 1H,1H-perfluorononanol (FDFC(9)OH) and its omega-hydrogenated analogue, 1H,1H,9H-perfluorononanol (HDFC(9)OH), against water was measured as a function of pressure and concentration at 298.15 K in order to clarify the effect of omega-dipole on the orientation of fluorononanol molecules from the viewpoint of volume. The adsorbed films of both alcohols exhibit two kinds of phase transitions among three different states: the gaseous, expanded, and condensed states. The partial molar volume changes of adsorption - in the expanded and condensed states were evaluated and compared between the two systems. The - values of both alcohols are negative, and thus the alcohol molecules have smaller volume in the adsorbed film than in the bulk solution. Furthermore, the value was obtained through the evaluation of by the density measurement of the bulk hexane solution. It was found that the value of HDFC(9)OH is smaller than that of FDFC(9)OH in the condensed state. On the basis of three matters concerning the molecular structure of alcohols, the occupied area at the interface, and the orientation of FDFC(9)OH in the adsorbed film deduced from the earlier results of X-ray reflectivity measurement, the mean tilt angle of HDFC(9)OH from the interface normal in the condensed film was estimated to be 15 degrees . The thermodynamic estimation demonstrated here is highly valuable one to provide structure information on an adsorbed film.     

Gas chromatography of manganese(II) and manganese(III) trifluoroacetylacetonates by the ligand vapour technique

The thermal properties and gas Chromatographie behaviour of manganese(II) and manganese(III) trifluoroacetylacetonates (TFA) were investigated by using the ligand vapour technique. The two chelates, Mn(TFA); and Mn(TFA)₃, can be quantitatively eluted on a mixed-liquid phase (1.9% OV-17 ÷ 0.1% PEG-20M) at column temperatures above 210°C and 130–150°C, respectively; Mn(TFA)₃ is completely converted to Mn(TFA)₂ by thermal dissociation at column temperatures above 180°C and completely eluted as Mn(TFA)₂ above 210°C. The chelates can be determined separately within errors of about 1% after a preliminary extraction.     

Zirconium phosphate dispersed on a cellulose fiber surface: preparation, characterization, and selective adsorption of Li+, Na+, and K+ from aqueous solution

Highly dispersed zirconium phosphate was prepared by reacting Cel/ZrO(2) (ZrO(2)=6.7 wt%; 0.56 mmol g(-1) of zirconium atom per gram of the material) with phosphoric acid. High power decoupling magic angle spinning (HPDEC-MAS)(31)P NMR and X-ray photoelectron spectroscopy data indicated that HPO(2-)(4) is the species present on the fiber surface. The X-ray diffraction patterns showed that zirconium hydrogen phosphate particles were amorphous and had an ion-exchange capacity, determined by ammonia gas adsorption, of 0.30 mmol g(-1). The ion-exchange capacities for Li(+), Na(+), and K(+) ions were determined from ion-exchange isotherms at 298 K and showed the following values (in mmol g(-1)): Li(+)=0.01, Na(+)=0.23, and K(+)=0.30. The higher affinity of the surface hydrogen phosphate particles for Na(+) and K(+) is due to its lamelar structure which permits easier diffusion of these two ions whose hydrated radii are smaller than that of Li(+).     

A theory of adsorption kinetics with time delay and its application to overshoot and oscillation in the surface tension of gelatin solution

A theory of adsorption kinetics with time delay [Ohshima et al. (1992) Colloid Polym. Sci. 270:707] is developed and applied to the surface tension of a polymer solution. It is found that the general appearance of the overshoot and oscillation in the time course of the surface tension of aqueous gelatin solution observed by Sato and Ueberreiter [(1979) Makromol. Chem. 180:829, 1107; (1979) Polym. Prepr. Am. Chem. Soc. Div. Polym. Chem. 20:907) can be explained by the present theory.     

Photodegradation of polyethylene in the presence of ferric chloride

Effects of ferric chloride (FeCl₃) on photodegradation of high-density polyethylene (PE) were investigated by using ESR and infrared spectrometry. In the system with irradiation at light of λ > 220 nm, PE irradiated at 77°K yielded an 8-line spectrum, the intensity of which was markedly weakened by using FeCl₃ with the sample, indicating a distinct depression of radical formation. On the other hand, PE with the use of FeCl₃ yielded radicals under irradiation only with light of λ > 300 nm, showing a singlet spectrum with a line width of 15 gauss. For photooxidized PE, almost the same effect of FeCl₃ was observed. On irradiation at room temperature, PE samples with and without FeCl₃ showed a singlet spectrum with line widths of 15 and 25 gauss, respectively. On the other hand, the unsaturated double bond contained in a small amount in PE sample was observed by infrared study to be decreased with photoirradiation; however, the decrease was sharply depressed with the addition of FeCl₃ to the sample. The degradation of carbonyl group in a photooxidized sample was markedly affected by photoirradiation, and the decay was obviously reduced for the sample on addition of FeCl₃. It is concluded that FeCl₃ works upon photodegradation of PE to enhance the Norrish type II reaction and to accelerate the formation of unsaturated double bond in the chain.     

Density functional study of the sigma and pi bond activation at the Pd=X (X = Sn, Si, C) bonds of the (H2PC2H4PH2)Pd=XH2 complexes. Is the bond cleavage homolytic or heterolytic?

The mechanism for the activation of the sigma bonds, the O-H of H2O, C-H of CH4, and the H-H of H2, and the pi bonds, the C[triple bond]C of C2H2, C=C of C2H4, and the C=O of HCHO, at the Pd=X (X = Sn, Si, C) bonds of the model complexes (H2PC2H4PH2)Pd=XH2 5 has been theoretically investigated using a density functional method (B3LYP). The reaction is significantly affected by the electronic nature of the Pd=X bond, and the mechanism is changed depending on the atom X. The activation of the O-H bond with the lone pair electron is heterolytic at the Pd=X (X = Sn, Si) bonds, while it is homolytic at the Pd=C bond. The C-H and H-H bonds without the lone pair electron are also heterolytically activated at the Pd=X bonds independent of the atom X, where the hydrogen is extracted as a proton by the Pd atom in the case of X = Sn, Si and by the C atom in the case of X=C because the nucleophile is switched between the Pd and X atoms depending on the atom X. In contrast, the pi bond activation of C[triple bond]C and C=C at the Pd=Sn bond proceeds homolytically, and is accompanied by the rotation of the (H2PC2H4PH2)Pd group around the Pd-Sn axis to successfully complete the reaction by both the electron donation from the pi orbital to Sn p orbital and the back-donation from the Pd dpi orbital to the pi orbital. On the other hand, the activation of the C=O pi bond with the lone pair electron at the Pd=Sn bond has two reaction pathways: one is homolytic with the rotation of the (H2PC2H4PH2)Pd group and the other is heterolytic without the rotation. The role of the ligands controlling the activation mechanism, which is heterolytic or homolytic, is discussed.     

Reactivities of Stable Rotamers: XLIV. Ring-Opening Reactions of 1-(9-Fluorenyl)-2-(2-methyl-2-oxiranyl)naphthalene Rotamers With Acids and the Structure of Oxiranes

X-ray crystallography of the ap-form of the 1-(9-fluorenyl)-2-(2-methyl-2-oxiranyl)naphthalene has revealed that the carbon atom of the oxirane which is connected to the naphthyl group in this compound is almost planar. The specific structural features of the epoxy ring in this compound are caused by sterical effects and by the presence of a -system in the immediate vicinity of the oxirane ring. Certain differences have been found also in reactivity of rotational isomers of 2-X-substituted 1-[1-(9-fluorenyl)-2-naphthyl]ethyl cations (X = O, S, Se). At X = O arose more deprotonation product from the -position of the oxygen than in reactions of sulfur and selenium-containing analogs. Reactions of epoxides with zinc chloride almost exclusively gave the corresponding aldehydes.