Radical chain reactions using THP as a solvent

THP (tetrahydropyran) has been found to show an excellent stability towards autooxidation, compared with THF. Tributyltin hydride mediated radical cyclization, when conducted in THF as a solvent, suffers from competition of hydrogen abstraction from the solvent, whereas the use of THP resulted in the course to negligible degree. Tributyltin hydride, TTMSS, and hexanethiol mediated radical reactions were carried out successfully using THP as a solvent.     

14.31 % Power Conversion Efficiency of Sn-Based Perovskite Solar Cells via Efficient Reduction of Sn4+

The photoelectric properties of nontoxic Sn-based perovskite make it a promising alternative to toxic Pb-based perovskite. It has superior photovoltaic performance in comparison to other Pb-free counterparts. The facile oxidation of Sn²⁺ to Sn⁴⁺ presents a notable obstacle in the advancement of perovskite solar cells that utilize Sn, as it adversely affects their stability and performance. The study revealed the presence of a Sn⁴⁺ concentration on both the upper and lower surfaces of the perovskite layer. This discovery led to the adoption of a bi-interface optimization approach. A thin layer of Sn metal was inserted at the two surfaces of the perovskite layer. The implementation of this intervention yielded a significant decrease in the levels of Sn⁴⁺ and trap densities. The power conversion efficiency of the device was achieved at 14.31 % through the optimization of carrier transportation. The device exhibited operational and long-term stability.     

Gold nanoparticle/charged silsesquioxane films immobilized onto Al/SiO2 surface applied on the electrooxidation of nitrite

In this work, gold nanoparticles lower than 10?nm were prepared in an aqueous medium using two charged silsesquioxanes, the propylpyridinium chloride and propyl-1-azonia-4-azabicyclo[2.2.2]octane chloride, as stabilizer agents which revealed to be water-soluble. This stabilization method is innovative allowing thin films containing gold nanoparticles to be obtained, and it was used for the first time in the preparation of carbon paste electrodes (CPEs). The charged silsesquioxanes were characterized by liquid ¹³C NMR. The gold nanoparticle/silsesquioxane systems were characterized by ultraviolet–visible spectroscopy (UV–Vis) and transmission electron microscopy. In sequence, they were immobilized on silica matrix coated with aluminum oxide. The resulting solid materials designated as Au-Py/AlSi and Au-Db/AlSi were characterized by infrared spectroscopy and N₂ adsorption/desorption isotherms. The results showed that the gold nanoparticle/silsesquioxane systems are strongly adhered to the surface-forming thin films. The Au-Py/AlSi and Au-Db/AlSi materials were used to prepare CPEs for the electrooxidation of nitrite (NO ₂ ^? ) using cyclic voltammetry and differential pulse voltammetry. The Au-Py/AlSi and Au-Db/AlSi CPEs showed high sensitivity and detection limits of 71.87 and 53.66?μA?mmol^–1?L and 1.3 and 3.0?μmol?L^–1, respectively.     

Gold nanoparticles on a thiol-functionalized silica network for ascorbic acid electrochemical detection in presence of dopamine and uric acid

A simple preparation methodology able to stabilize gold nanoparticles and to obtain an electrode which detects ascorbic acid, uric acid, and dopamine by different techniques is presented. A 3-mercaptopropyl-functionalized silica network was synthesized using the sol–gel method. Gold nanoparticles (nAu) were immobilized on the material at synthesis by adding a sol of these previously prepared particles to the reaction mixture. The electrochemical behavior of the SiO₂/MPTS/Au carbon paste electrode was studied using cyclic voltammetry in the presence of a hexacyanoferrate probe molecule. The presence of nAu in the functionalized silica network changes the electrochemical characteristics of the material, favoring the electron transfer process of this complex ion. The SiO₂/MPTS/Au electrode was proven to be an efficient tool in the simultaneous determination of ascorbic acid (H₂AA), dopamine (DA), and uric acid (UA) using square wave voltammetry techniques. With the nAu on the electrode, an increase in the peak current related to the redox process of the H₂AA, DA, and UA was observed. The separations of the anodic peak potentials between DA/H₂AA and UA/H₂AA were 310 and 442?mV, respectively. The results obtained show that the SiO₂/MPTS/Au electrode can be used in the simultaneous determination of H₂AA, DA, and UA.     

Percolative proton conductivity of sol-gel derived amorphous aluminosilicate thin films

The finite size effect of proton conductivity of amorphous aluminosilicate thin films, a-Al(n)Si(1-n)O(x) (n = 0.07, 0.1, 0.2, 0.3 and 0.45), prepared by a sol-gel process was investigated by experimental and numerical techniques. High-resolution TEM clarified that a-Al(n)Si(1-n)O(x) films had the heterogeneous nanoscale microstructures comprised of the ion-conducting, condensed glass microdomain and the poor-conductive, uncondensed glass microdomain. σ of the films with n≤0.1 exponentially increased upon decreasing thickness in the sub-100 nm range because the volume fraction of conductive domains was less than the percolation threshold and cluster size scaling of the conductive domain was operative. The numerical simulation suggested that conductance of the condensed domain was higher than that of the uncondensed domain by 2 orders of magnitude. Volume fractions of the condensed domain increased with increasing Al/Si molar ratio and were over the percolation threshold (24.5%) with n≥0.2. However, conductance of the condensed domain decreased with increasing Al/Si ratio with n≥0.2 because the aluminosilicate glass framework made of 4-fold-connected MO(4) tetrahedra was deformed by forming the octahedral AlO(6) moieties, as checked by Al K-edge XAS. It was found that the optimal Al/Si composition in terms of the conductance of the condensed domain is not in coincidence with that in terms of the average conductivity of the films.     

Crystal structure and physical properties of Fe1.5Pb5.5In10S22

A new compound, Fe2+(1.5)Pb2+(5.5)In3+(10)S2-(22), was found in the Fe-Pb-In-S system. The crystals had a shiny metallic gray luster and were obtained in a barlike shape. The melting and recrystallizing points are 1098 and 1090 K, respectively. The crystal structure determined by X-ray diffraction is P2/m, a = 14.558(1) A, b = 3.8556(3) A, c = 15.558(1) A, beta = 96.876(1) degrees , V = 867.0(1) A(3), Z = 1, Dc = 5.893 g/cm(3), and R1 = 3.78%, which is an isostructure with Sn(5.5)In(11)S(22). In the structure, lead atoms exist at three crystallographically independent sites, and one of them, Pb1, is occupied by a quarter of indium atoms. All of the Fe ions are randomly distributed at six indium sites. This compound is a semiconductor with a band gap, E(a) = 0.95 eV. The dominant magnetic interaction is antiferromagnetic, but magnetic orderings are not observed down to 2 K.     

Analyzing atomic liquids and solids by means of two-dimensional Raman spectra in frequency domain

A practical method to evaluate the contributions of the nonlinear polarizability and anharmonicity of potentials from the experimental and simulation data by using double Fourier transformation is presented. In a Lennard-Jones potential system, an approximated expression of the fifth-order response function using the ratio between nonlinear polarizability and anharmonicity exhibits a good agreement with the results of the molecular dynamics simulation. In a soft-core case, the fifth-order Raman signal indicates that the system consists of the delocalized and localized modes, and only the delocalized mode affects the dramatic change of the fifth-order Raman response functions between solid and liquid phases through nonlinear polarizability.     

FAD-modified SiO2/ZrO2/C ceramic electrode for electrocatalytic reduction of bromate and iodate

SiO₂/ZrO₂/C carbon ceramic material with composition (in wt%) SiO₂ = 50, ZrO₂ = 20, and C = 30 was prepared by the sol–gel-processing method. A high-resolution transmission electron microscopy image showed that ZrO₂ and the graphite particles are well dispersed inside the matrix. The electrical conductivity obtained for the pressed disks of the material was 18 S cm⁻¹, indicating that C particles are also well interconnected inside the solid. An electrode modified with flavin adenine dinucleotide (FAD) prepared by immersing the solid SiO₂/ZrO₂/C, molded as a pressed disk, inside a FAD solution (1.0 × 10⁻³ mol L⁻¹) was used to investigate the electrocatalytic reduction of bromate and iodate. The reduction of both ions occurred at a peak potential of −0.41 V vs. the saturated calomel reference electrode. The linear response range (lrr) and detection limit (dl) were: BrO₃ ⁻, lrr = 4.98 × 10⁻⁵–1.23 × 10⁻³ mol L⁻¹ and dl = 2.33 μmol L⁻¹; IO₃ ⁻, lrr = 4.98 × 10⁻⁵ up to 2.42 × 10⁻³ and dl = 1.46 μmol L⁻¹ for iodate.     

Total Synthesis of (−)‐Apratoxin A, 34‐Epimer,and Its Oxazoline Analogue

A concise and convergent total synthesis of the highly cytotoxic marine natural product apratoxin A is accomplished by an 18‐step linear sequence. The high sensitivity of the thiazoline, bearing an adjacent β‐hydroxyl group at the C35‐position, results in the assembly process requiring the inclusion of appropriate protecting groups and the careful optimization of all individual transformations. In the synthesis of 3,7‐dihydroxy‐2,5,8,8‐tetramethylnonanoic acid (Dtena), the three reagent‐controlled asymmetric reactions enables us to introduce four chiral carbon centers in a dihydroxylated fatty acid moiety. Formation of the hindered ester and sterically‐unfavorable N‐methylamide bonds were successfully demonstrated. The thiazoline in apratoxin A was constructed by Tf₂O and Ph₃PO‐mediated dehydrative cyclization, and final macrocyclization was achieved between N‐methylisoleucine and proline residues. Moreover, an oxazoline analogue and a C34 epimer of apratoxin A have also been elaborated in a similar approach. This synthetic route would enable assembly of other analogues differing in stereocenters of Dtena and their amino acids.     

Structure Solution of Nano-Crystalline Small Molecules Using MicroED and Solid-State NMR Dipolar-Based Experiments

Three-dimensional electron diffraction crystallography (microED) can solve structures of sub-micrometer crystals, which are too small for single crystal X-ray crystallography. However, R factors for the microED-based structures are generally high because of dynamic scattering. That means R factor may not be reliable provided that kinetic analysis is used. Consequently, there remains ambiguity to locate hydrogens and to assign nuclei with close atomic numbers, like carbon, nitrogen, and oxygen. Herein, we employed microED and ssNMR dipolar-based experiments together with spin dynamics numerical simulations. The NMR dipolar-based experiments were ¹H-¹⁴N phase-modulated rotational-echo saturation-pulse double-resonance (PM-S-RESPDOR) and ¹H-¹H selective recoupling of proton (SERP) experiments. The former examined the dephasing effect of a specific ¹H resonance under multiple ¹H-¹⁴N dipolar couplings. The latter examined the selective polarization transfer between a ¹H-¹H pair. The structure was solved by microED and then validated by evaluating the agreement between experimental and calculated dipolar-based NMR results. As the measurements were performed on ¹H and ¹⁴N, the method can be employed for natural abundance samples. Furthermore, the whole validation procedure was conducted at 293 K unlike widely used chemical shift calculation at 0 K using the GIPAW method. This combined method was demonstrated on monoclinic l-histidine.