An iridoid glucoside dimer and a non-glycosidic iridoid from the leaves of Lasianthus wallichii

A new iridoid glucoside dimer (1) and a non-glycosidic iridoid (2) was isolated together with the known compounds, asperuloside (3), paederoside (4), daphylloside (5), citroside A (6) and benzyl 6-O-alpha-L-rhamnopyranosyl-beta-D-glucopyranoside (7), from the leaves of Lasianthus wallichii. The structures of the new compounds were elucidated by spectroscopic and chemical evidence.     

The role of precursors in the structure of SiO2-Al2O3 sols and gels by the sol-gel process

Binary sols and gels of SiO₂-Al₂O₃ were prepared using tetraethyl orthosilicate and each of four aluminum compounds; aluminum di (sec-butoxide) ethylacetoacetic ester chelate (AC), aluminum nitrate nonahydrate (AN), aluminum formoacetate (AF), and boehmite sol (BS) made from aluminum i-propoxide. The structure and the evolution of the Si-O-Al bonds in SiO₂-Al₂O₃ sols and gels were investigated by ²⁷Al nuclear magnetic resonance (NMR), Infrared absorption spectra, DTA, and X-ray diffraction. The formation of Si-O-Al bonds differs depending on the aluminum compounds used as raw materials. The ratio of Al(IV) to {Al(IV) + Al(VI)} is related to the microstructural homogeneity of the gels. When AC is used as a raw material, the Si-O-Al bonds are formed in the sol state and resultant gel shows good microstructural homogeneity. In case of AN, the Si-O-Al bonds are not formed either in the sol or the wet gel state. The bonds are formed by drying the gel before heat-treatment temperature reaches 300 400°C, resulting in good microstructural homogeneous gel. When AF is used, the Si-O-Al bonds are formed in the sol state but the ratio of Al(IV) to {Al(IV) + Al(VI)} is lower than when using AC. Microstructural homogeneity of the gel is ranked between AC or AN and BS. Using BS, the Si-O-Al bonds are not formed in the sol solution, and the change in the coordination number of the gel is similar to that of boehmite gel. The Microstructural homogeneity of the gel is the worst among the BS gels, which were prepared by using the four aluminum raw materials.     

Polyhydrazides. IV. Preparation and properties of poly-N-ethyl- and isopropylhydrazide oxadiazoles

High molecular weight poly-N-alkylhydrazide-oxadiazoles have been prepared in poly-phosphoric acid by alkylation of poly-1,3,4-oxadiazole which was synthesized from terephthalic acid and hydrazine sulfate. Various kinds of reagents having an alkoxy group were used as alkylating agent, and N-ethylated and N-propylated polyhydrazides containing oxadiazole units were obtained. The thermal properties of the polymers obtained were investigated by using infrared spectroscopy, viscometry, differential thermometric and thermogravimetric techniques. Soluble poly-N-alkylhydrazide-oxadiazole are thermally cyclized to poly-1,3,4-oxadiazole with elimination of olefins and water at 226–330°C for propylated polydrazide and at 240–360°C for ethylated polyhydrazide. For both, weight loss in polyhydrazides occurs in two distinct stages corresponding, respectively, to cyclization and decomposition of the poly-1,3,4-oxadiazole formed in situ.     

Quantitative evaluation of the bitterness of commercial medicines using a taste sensor

The bitterness of 11 commercial medicines was evaluated both by a multichannel taste sensor and in human gustatory sensation tests with 15 volunteers. For basic drugs with amino groups in the molecule, such as quinine, there was a comparatively strong relative response electric potential (mV) of channels 1 or 2, those containing negatively charged membranes and the bitterness determined by human gustatory sensation tests. The suppression of the bitterness of quinine by sucrose and aspartame could be quantified using the artificial taste sensor and the results concurred with those from gustatory sensation tests. The usefulness of the sensor was thus confirmed for this type of compound. Anionic drugs, such as diclofenac sodium or salicylic acid gave rise in a negative response electric potential in channels 5 or 6, those containing positively charged membrane, seemed to be useful information even though their tastes are being sour rather than bitter. For drugs with both an amino (cationic) group and carboxylic acid (anionic) group in the molecule, such as theophylline, caffeine, and metronidazole, the relative response electric potential (mV) of channels containing negatively charged membranes was not increased, even though bitterness was observed in human gustatory sensation tests. Therefore, a different design of membrane component is required for more general evaluation of the bitterness of various medicines.     

Specific recognition of chiral amino alcohols via lanthanide coordination chemistry: structural optimization of lanthanide tris(beta-diketonates) toward effective circular dichroism/fluorescence probing

Lanthanide tris(beta-diketonates) formed stable, 1:1 highly coordinated complexes with amino alcohols, and the resulting complexes exhibited large enhanced fluorescence and intense induced circular dichroism (CD) signals. The stability constants of the highly coordinated complexes were determined for various combinations of lanthanide centers, beta-diketonate ligands, and organic substrates. These revealed that amino alcohol coordinated with the lanthanide center much more strongly than monoamine, monoalcohol, or diol derivative. On the basis of the highly coordinated complexation, several lanthanide tris(beta-diketonates) acted as CD/fluorescence probes specific for amino alcohols. Tris(6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octadionato)europium(III) showed enhanced fluorescence in the presence of amino alcohols, while the corresponding ytterbium complex exhibited chirality-dependent CD signals for amino alcohols. In particular, the observed CD spectral profiles related well with the absolute configuration and optical purity of the bound amino alcohol, indicating that the structural optimization of lanthanide tris(beta-diketonates) offered specific sensing of amino alcohols and precise determination of their enantiomer excess percentages.     

Photoinduced intramolecular electron-transfer processes in [60]fullerene-(Spacer)-N,N-bis(biphenylyl)aniline dyad in solutions

Intramolecular photoinduced charge-separation and charge-recombination processes in a covalently connected C60-(spacer)-N,N-bis(biphenylyl)aniline (C60-spacer-BBA) dyad, in which the center-to-center distance of the electron acceptor and electron donor is 15 A, have been studied by time-resolved fluorescence and transient absorption methods. The observed low fluorescence intensity and the short fluorescence lifetime of the C60 moiety of the dyad in PhCN and THF indicate that charge separation takes place via the excited singlet state of the C60 moiety at a quite fast rate and a high efficiency. The nanosecond transient absorption spectra in PhCN and THF showed the broad absorption bands at 880 and 1100 nm, which were attributed to C60(*-)-spacer-BBA(*+). The charge-separated state decays with a lifetime of 330-360 ns in PhCN and THF at room temperature. From temperature dependence of the charge-recombination rate constants, the reorganization energy was evaluated to be 0.77-0.87 eV, which indicates that the charge-recombination process is in the inverted region of the Marcus parabola. With lowering temperature, the contribution of charge separation via the excited triplet state of the C60 moiety increases due to an increase in solvation of C60(*-)-spacer-BBA(*+).     

Syntheses and redox properties of bis(hydroxoruthenium) complexes with quinone and bipyridine ligands. Water-oxidation catalysis

The novel bridging ligand 1,8-bis(2,2':6',2"-terpyridyl)anthracene (btpyan) is synthesized by three reactions from 1,8-diformylanthracene to connect two [Ru(L)(OH)]+ units (L = 3,6-di-tert-butyl-1,2-benzoquinone (3,6-tBu2qui) and 2,2'-bipyridine (bpy)). An addition of tBuOK (2.0 equiv) to a methanolic solution of [RuII2(OH)2(3,6-tBu2qui)2(btpyan)](SbF6)2 ([1](SbF6)2) results in the generation of [RuII2(O)2(3,6-tBu2sq)2(btpyan)]0 (3,6-tBu2sq = 3,6-di-tert-butyl-1,2-semiquinone) due to the reduction of quinone coupled with the dissociation of the hydroxo protons. The resultant complex [RuII2(O)2(3,6-tBu2sq)2(btpyan)]0 undergoes ligand-localized oxidation at E1/2 = +0.40 V (vs Ag/AgCl) to give [RuII2(O)2(3,6-tBu2qui)2(btpyan)]2+ in MeOH solution. Furthermore, metal-localized oxidation of [RuII2(O)2(3,6-tBu2qui)2(btpyan)]2+ at Ep = +1.2 V in CF3CH2OH/ether or water gives [RuIII2(O)2(3,6-tBu2qui)2(btpyan)]4+, which catalyzes water oxidation. Controlled-potential electrolysis of [1](SbF6)2 at +1.70 V in the presence of H2O in CF3CH2OH evolves dioxygen with a current efficiency of 91% (21 turnovers). The turnover number of O2 evolution increases to 33,500 when the electrolysis is conducted in water (pH 4.0) by using a [1](SbF6)2-modified ITO electrode. On the other hand, the analogous complex [RuII2(OH)2(bpy)2(btpyan)](SbF6)2 ([2](SbF6)2) shows neither dissociation of the hydroxo protons, even in the presence of a large excess of tBuOK, nor activity for the oxidation of H2O under similar conditions.     

A platinum-ruthenium dinuclear complex bridged by bis(terpyridyl)xanthene

4,5-Bis(terpyridyl)-2,7-di-tert-butyl-9,9-dimethylxanthene (btpyxa) was prepared to serve as a new bridging ligand via Suzuki coupling of terpyridin-4'-yl triflate and 2,7-di-tert-butyl-9,9-dimethylxanthene-4,5-diboronic acid. The reaction of btpyxa with either 1 equiv or an excess of PtCl(2)(cod) (cod = 1,5-cyclooctadiene) followed by anion exchange afforded mono- and dinuclear platinum complexes [(PtCl)(btpyxa)](PF(6)) ([1](PF(6))) and [(PtCl)(2)(btpyxa)](PF(6))(2) ([2](PF(6))(2)), respectively. The X-ray crystallography of [1](PF(6)).CHCl(3) revealed that the two terpyridine units in the ligand are nearly parallel to each other. The heterodinuclear complex [(PtCl)[Ru((t)Bu(2)SQ)(dmso)](btpyxa)](PF(6))(2) ([4](PF(6))(2)) (dmso = dimethyl sulfoxide; (t)Bu(2)SQ = 3,5-di-tert-butyl-1,2-benzosemiquinone) and the monoruthenium complex [Ru((t)Bu(2)SQ)(dmso)(trpy)](PF(6)) ([5](PF(6))) (trpy = 2,2':6',2' '-terpyridine) were also synthesized. The CV of [2](2+) suggests possible electronic interaction between the two Pt(trpy) groups, whereas such an electronic interaction was not suggested by the CV of [4](2+) between Pt(trpy) and Ru((t)Bu(2)SQ) frameworks.     

Synthesis of 2,5-diethyl-3,4-bis(trifluoromethyl)furan and its derivatives

The addition reaction of propionaldehyde to hexafluoro-2-butyne ( 1 ) under γ-ray irradiation gave trans-6,6,6-trifluoro-4-trifluoromethyl-4-hexen-3-one ( 2 ) and 4,5-bis(trifluoromethyl)octa-3,6-dione ( 3 ). The latter compound was treated with sulfuric acid to give 2,5-diethyl-3,4-bis(trifluoromethyl)furan ( 4a ). Several reactions, such as bromination, dehydrobromination and oxidation, were carried out to prepare derivatives of 4a .     

PHYTOCHROME-MEDIATED PHOTOTROPISM AND DIFFERENT DICHROIC ORIENTATION OF Pr AND Pfr IN PROTONEMATA OF THE FERN ADIANTUM CAPILLUS-VENERIS L.

Abstract— Single-celled protonemata of Adiantum capillus-veneris were cultured under continuous red light for 6 days and then in the dark for 15 h. Brief local exposure of a flank (5 times 20 /mi) of the subapical region of a protonema to a microbeam of red light effectively induced a phototropic response toward the irradiated side. The degree of the response was dependent upon the fluence of the red light. Red/far-red reversibility was typically observed in this photoreaction, showing that phytochrome was the photo-receptive pigment. When the flank was irradiated with a microbeam of linearly polarized red and far-red light, red light with an electrical vector parallel to the cell surface was most effective. However, the far-red light effect was most prominent when its electrical vector was normal to the cell surface. These polarized light effects indicate the different dichroic orientation of P_r (red-light-absorbing form of phytochrome) and P_r (far-red-light-absorbing form of phytochrome) at the cell flank.