Simultaneous Measurement of Droplet Size and Three-Components of Velocity in Spray

The combination of the optical diagnostics and image processing technique has produced various methods of practical measurement in engineering. The measurement of size and velocity of droplets in fuel spray is one typical example. In general, the spray is a complicated and three-dimensional two-phase flow; therefore multi-dimensional field measurement of the spray field is indispensable. In the present paper, a technique of simultaneous measurement of droplet size and three-components of velocity is proposed and applied to spray issuing from the swirl nozzle as a practical application. The focused image of glare points is captured by a stereoscopic arrangement, and droplet size and the three-components of velocity are evaluated from the doublet image. Fundamental optical arrangements to capture the image of the glare points with a stereo view are established, and the feasibility and the accuracy of the technique are confirmed. © 2004 The Optical Society of Japan     

Fast‐response organic–inorganic hybrid light‐emitting diode

We demonstrated important changes produced on the modulation frequency of hybrid organic–inorganic light‐emitting diodes to examine the applicability as a light source for visible optical communications. The fabricated device structure was 4,4′‐bis[N ‐(1‐napthyl)‐N ‐phenyl‐amino]biphenyl/4,4′‐(bis(9‐ethyl‐3‐carbazovinylene)‐1,1′‐biphenyl:4,4′‐bis[9‐dicarbazolyl]‐2,2′‐biphenyl/ZnS/LiF/MgAg. This device showed an improvement in the modulation frequency using ZnS instead of an organic material, tris(8‐hydroxyquinoline)aluminum. A maximum cutoff frequency of 20.6 MHz was achieved.

     

Nucleon spin structure in a relativistic constituent quark model

The spin structure of the nucleon is analyzed using a relativistic constituent quark model in light-front formulation. We investigate, in particular, relativistic effects on the axial vector coupling constants. Electromagnetic and axial form factors are constructed in terms of quark form factors that reflect the possible non-trivial structure of the constituent quarks. We study the influence of flavour mixing effects on axial constants and discuss the extent to which such effects can renormalize the singlet axial constant g _A ⁰ from its SU(6) quark model value.     

Experimental demonstration of the induction synchrotron

We report an experimental demonstration of the induction synchrotron, the concept of which has been proposed as a future accelerator for the second generation of neutrino factory or hadron collider. The induction synchrotron supports a superbunch and a superbunch permits more charge to be accelerated while observing the constraints of the transverse space-charge limit. By using a newly developed induction acceleration system instead of radio-wave acceleration devices, a single proton bunch injected from the 500 MeV booster ring and captured by the barrier bucket created by the induction step voltages was accelerated to 6 GeV in the KEK proton synchrotron.     

Signal measurement system for intra-body communication using optical isolation method

In this paper, we describe an induced signal measurement on the human body for developing a high-performance transceiver of an intra-body communication system. It is important to isolate awearable transceiver from an electrical instrument for precise measurement. We have developed a probe system using an optical isolation method including a laser diode, photo-diode, and optical fiber. The probe system can be successfully applied to the precise measurement of a receiving signal power at a wearable transceiver. We verify that the experimental results agree with the simulation results based on our previous channel model of intra-body communication.     

Direct micropatterning of high dielectric BaTiO3 films by laser-induced pyrolysis with a nano-crystalline seeding technique

A direct patterning method of dielectric BaTiO₃ (BT) films is proposed, which applies laser-induced pyrolysis in combination with nano-crystalline seeding technique. A precursor solution of a BT complex alkoxide containing BT nano-crystalline particles with polyvinylpyrollidone (PVP) as dispersion stabilizer was spin-coated on Pt substrate. An Ar⁺ laser beam was focused and scanned on spin-coated BT films, which induced pyrolysis and crystallization of the films with spatial selectivity. Micropatterns were obtained by striping laser-unirradiated regions on the films with HCl aqueous solution. Raman spectra of the micropattern confirmed that the structures were tetragonal crystalline BT. Clear micropatterns with a line width of ca. 3 μm and an interval of 5 μm were formed at PVP concentrations of 25 and 50 kg/m³. The dielectric constant and dissipation factor of the film fabricated at a laser energy density of 27 MW/cm² and a scanning speed of 25 μm/s attained 76.2 and 0.07, respectively, for a measurement frequency of 100 kHz.     

Cu NMR/NQR Studies on Magnetism in Impurity/Hole-Doped Spin-Ladder Compounds

Cu nuclear magnetic resonance (NMR) spectra of impurities (Zn, Ni, and La)-doped spin-1/2 Heisenberg ladder compounds SrCu₂O₃ (Sr123) are broadened with Curie-like temperature (T) dependence. The spectra have been successfully fit by using a quasi-one-dimensional (Q1D) staggered polarization (SP) model. Such a SP has also revealed in Cu NMR measurements of Sr_14–x Ca _x Cu₂₄O₄₁ (Cax) with hole-doped ladders. The origin of possible 3D antiferromagnetic (AF) long-range ordering in (Zn and Ni)-doped Sr123 and Cax around x=12 at low T is considered to be similar. Once unpaired spins S ₀'s are induced and 3D interlayer interaction occurs, the localized spins couple in the whole system.     

Novel superconducting phases in copper oxides and iron-oxypnictides: NMR studies

We reexamine the novel phase diagrams of antiferromagnetism (AFM) and high-T_c superconductivity (HTSC) for a disorder-free CuO₂ plane based on an evaluation of local hole density (p) by site-selective Cu-NMR studies on multilayered copper oxides. Multilayered systems provide us with the opportunity to research the characteristics of the disorder-free CuO₂ plane. The site-selective NMR is the best and the only tool used to extract layer-dependent characteristics. Consequently, we have concluded that the uniform mixing of AFM and SC is a general property inherent to a single CuO₂ plane in an underdoped regime of HTSC. The T=0 phase diagram of AFM constructed here is in quantitative agreement with the theories in a strong correlation regime which is unchanged even with mobile holes. This Mott physics plays a vital role for mediating the Cooper pairs to make T_c of HTSC very high. By contrast, we address from extensive NMR studies on electron-doped iron-oxypnictides La1111 compounds that the increase in T_c is not due to the development of AFM spin fluctuations, but because the structural parameters, such as the bond angle α of the FeAs₄ tetrahedron and the a-axis length, approach each optimum value. Based on these results, we propose that a stronger correlation in HTSC than in FeAs-based superconductors may make T_c higher significantly.