On-target derivatization of keratan sulfate oligosaccharides with pyrenebutyric acid hydrazide for MALDI-TOF/TOF-MS

In the present work, a rapid and novel method of on-target plate derivatization of keratan sulfate (KS) oligosaccharides for subsequent analysis by matrix-assisted laser desorption and ionization (MALDI) mass spectrometry is described. MALDI-(time-of-flight)-TOF spectra of labeled KS oligosaccharides revealed that significantly improved ionization can be accomplished through derivatization with pyrenebutyric acid hydrazide (PBH), and the most abundant peak in each spectrum corresponds to the singly charged molecular ion [M - H]- or [M + (n - 1)Na - nH]-, where n = the number of sulfates (n = 1, 2, 3...). The high-energy collision-induced dissociation (heCID) spectra of labeled KS oligosaccharides displayed fragments of compounds similar to those observed with laser-induced dissociation (LID) analysis, suggesting that both heCID and LID fragmentations can be used to analyze KS oligosaccharides. Moreover, fragmentation analysis of all labeled KS oligosaccharides was performed by MALDI-TOF/TOF-MS. With LID mode, sodium adducts showed fragmentation of glycosidic linkages with mainly Y/B/C ions, as well as various cross-ring cleavages providing exact information for the positions of sulfate groups along the KS oligosaccharide chains. This one-step on-target derivatization method makes MALDI-TOF/TOF-MS identification of KS fast, simple and highly throughput for trace amounts of biological samples.     

Ultra narrow PbS nanorods with intense fluorescence

We report on the narrowest "free" quantum rods of PbS with 1.7 nm diameter produced in a single step under bench-top reaction conditions. The nanorods exhibit molecule-like discrete narrow optical behavior with high fluorescence quantum yield. We propose a new macroscopic vortex assembly formation by simple spin casting route. Interestingly, the pattern generates fluorescence along its line from the nanorod domains. The ultra narrow nanorods with strong discrete fluorescence and robust stability could be useful in biological labeling, fluorescence resonance energy transfer, and optoelectronics applications, as well as to verify the theories in the very strong confinement regime.     

Immobilization of cellulose phenylcarbamate onto silica gel via in termolecular polycondensation of triethoxysilyl groups introduced with (3-glycidoxypropyl)triethoxysilane

Cellulose 3,5-dimethylphenylcarbamate was successfully immobilized onto bare silica gel for HPLC through the intermolecular polycondensation of triethoxysilyl groups, which were introduced onto the cellulose derivative via epoxide ring-opening reaction under acidic conditions. The immobilized-type chiral packing material (CPM) exhibited high chiral recognition ability and could be used with various eluents, which are incompatible with the conventional CPMs prepared by coating the derivative onto silica gel.     

Control of aqueous droplets using magnetic and electrostatic forces

Basic control operations were successfully performed on an aqueous droplet using both magnetic and electrostatic forces. In our droplet-based microfluidics, magnetic beads were incorporated in an aqueous droplet as a force mediator. This report describes droplet anchoring and separation of the beads from the droplet using a combination of magnetic and electrostatic forces. When an aqueous droplet is placed in an oil-filled reservoir, the droplet sinks to the bottom, under which an electrode had been placed. The droplet was adsorbed (or anchored) to the bottom surface on the electrode when a DC voltage was applied to the electrode. The magnetic beads were removed with magnetic force after the droplet had been anchored. Surfactant addition into droplet solution was very effective for the elimination of electric charge, which resulted in the stable adsorption of a droplet to hydrophobic substrate under an applied voltage of DC 0.5-3 kV. In a sequential process, small volume of aqueous liquid was successfully transferred using both magnetic and electrostatic forces.     

Application of electrospray ionization tandem mass spectrometry for the rapid and sensitive determination of cobalt in urine

Recently, cobalt (Co) is reported to be taken as a supplement by athletes for improving anaerobic performance. For the diagnosis of abuse, the limit of detection (LOD) of Co in the analysis should be lower than the concentrations of Co in plasma and urine of normal persons. A simple, rapid and sensitive method has been developed for the determination of Co in urine. Co was complexed with diethyldithiocarbamate (DDC) and extracted with isoamyl alcohol in the presence of citric acid. The detection of Co was achieved by injecting a 1-μL aliquot of isoamyl alcohol containing Co-DDC complex directly into an electrospray ionization tandem mass spectrometric (ESI-MS-MS) instrument without chromatographic separation. The quantification was performed using selected reaction monitoring at m/z 291 of the product ion Co(C₄H₁₀NCS)₂⁺ which was produced by collision-induced dissociation from the precursor ion Co(DDC)₂⁺ at m/z 355. ESI-MS-MS data were obtained in less than 10 min with an LOD of 0.05 μg L⁻¹ and a linear calibration range of 0.1-100 μg L⁻¹ using 10 μL of urine. The procedure was validated with certified reference materials (SRM 2670a and SRM 1643e). This method is suitable for the analysis of Co in the laboratories already equipped with an ESI-MS-MS instrument.     

Nitrogen-directed ortho-arylation and -heteroarylation of aromatic rings catalyzed by ruthenium complexes

The ruthenium-catalyzed direct ortho-arylation reactions of 2-phenylpyridine and 2-aryloxazolines have been successfully expanded to the direct aryl-heteroaryl coupling reactions using heteroaryl bromides. The reaction mechanism involving the Ru^II/Ru^IV intermediates is proposed from the results of the stoichiometric reaction of a divalent ruthenacycle complex of 2-phenylpyridine with bromobenzene.     

Studies on analgesic oligopeptides. VI. Further studies of synthesis and biological properties of tripeptide alkylamides, Tyr-D-Arg-Phe-X

Nine analogs based on a structure of Tyr-D-Arg-Phe-X (X = alkylamides or alkylhydrazide containing electron-withdrawing atoms or groups) were newly synthesized and their biological properties were examined by the opioid receptor binding properties of mu-, delta- and kappa-receptors, guinea-pig ileum (GPI) assay and analgesic activity in the tail pinch test after subcutaneous administration in mice. Analogs with X = NHCF2CF3, Sar-ol, or NH(CH2)2CN showed potent activities in the GPI and analgesic assays and high affinity for mu-receptor. An analog with X = taurinamide was found to possess 4-fold higher mu-receptor selectivity than that of [D-Ala2, MePhe4, Gly-ol5]enkephalin (DAGO). The receptor binding properties of previously reported analogs [Chem. Pharm. Bull., 33, 1528 (1985); ibid., 33, 4865 (1985); ibid., 36, 4834 (1988)] were also examined for overall discussion of the structure-activity relationships of this series of tripeptide amides.     

Furan derivatives. Part 12 . Synthesis of 2,5-dioxacyclohepta[jkl]-as-indacenes

A variety of 2,5-dioxacyclohepta[jkl]-as-indacenes 5, 7–14 were synthesized as a new heterocycle by the treatment of diethyl (5,9-dioxobenzocyclohepten-1,4-diyloxy)diacetates 4a-e with potassium hydroxide or sodium hydride in dioxane. The mechanism of furan-ring formation from 4a-e was discussed.     

Preparation and properties of polyarylates from 5-t-butylisophthaloyl chloride and various bisphenols

Polyarylates containing a t-butyl pendant group were prepared from 5-t-butylisophthaloyl chloride and various bisphenols through the phase-transfer catalyzed two-phase polycondensation. The polyarylates having inherent viscosities up to 3.1 dL/g were obtained quantitatively. They were readily soluble in various solvents such as chloroform, m-cresol, and pyridine. Coloreless, transparent, and flexible films could be cast from the chloroform solutions of the polymers. The polyarylates had glass transition temperatures between 210 and 320°C, and did not lose weight below 350°C, with 10% weight loss being recorded at 395–450°C in air.     

Synthesis and characterization of novel aromatic polyamides from 3,4-bis(4-aminophenyl)-2,5-diphenylfuran and aromatic diacid chlorides

A new highly phenylated heterocyclic diamine, 3,4-bis(4-aminophenyl)-2,5-diphenylfuran, was synthesized in three steps from 4–-nitrodeoxybenzoin. The low temperature solution polycondensation of the diamine with various aromatic diacid chlorides afforded tetraphenylfuran-containing aromatic polyamides with inherent viscosities of 0.2–0.8 dL/g. Copolyterephthalamides were obtained from the diamine and 4,4′-oxydianiline. The polyamides were generally soluble in a wide range of solvents that included N,N-dimethylacetamide, N-methyl-2-pyrrolidone, pyridine, and m-cresol. Glass transition temperatures of the polyamides and copolyamides ranged from 302–342°C, and 10% weight loss was observed above 480°C in nitrogen.