Photocatalytic Reduction of NO with C2H6 on a Hollandite-Type Catalyst

The photocatalytic reduction of nitrogen monoxide (NO) with ethane on the hollandite type catalyst (K₂Ga₂Sn₆O₁₆KGSO) was investigated. Using a closed-gas circulating system equipped with a Q-MASS detector and in-situ diffuse reflectance FT-IR spectroscopy. The reactant gases of NO and ¹³C₂H₆ decreased with the increasing irradiation time. In contrast, the N₂ yield increased proportionally to the conversion of ¹³C₂H₆. Nitrogen oxides such as N₂O did not reach their detectable levels. The NO adsorbed on KGSO was found to change to its activated species by UV irradiation. The oxidized products of C₂H₆ such as CH₃CHO increased in proportion to the reaction time. The present results strongly suggest that KGSO has remarkable photocatalytic activity for the reduction of NO with C₂H₆.     

Optical microscopy and in situ Raman scattering of single crystalline ethylene hydrate and binary methane-ethylene hydrate at high pressures

Visual observations through a microscope and in situ Raman measurements have been made for single crystalline ethylene hydrate (EH) and binary methane-ethylene hydrate (MEH) at pressures up to 3.7 GPa and room temperature. Both hydrates showed pressure-induced phase transitions at 1.6, 2.0, and 3.0 GPa for EH and at 1.7, 2.1, and 3.3 GPa for MEH. The cubic sI phase of EH and MEH remains stable up to 1.6 and 1.7 GPa, respectively, which are more widely ranging values than the values for the methane hydrate sI phase. In this sI phase of binary MEH, the cage occupancies by methane and ethylene molecules are investigated from Raman spectra. Above P = 3.0 GPa for EH and 3.3 GPa for MEH, they decomposed by associating with the formation of the polyethylene.     

Blue myoglobin reconstituted with an iron porphycene shows extremely high oxygen affinity

Myoglobin will be a good scaffold for engineering a function into proteins. To modulate the physiological function of myoglobin, almost all approaches have been demonstrated by site-directed mutagenesis, however, there are few studies which show a significant improvement in the function. In contrast, we focused on the replacement of heme in the protein with an artificial prosthetic group. Recently, we prepared a novel myoglobin reconstituted with an iron porphycene as a structural isomer of mesoheme. The bluish colored reconstituted myoglobin is relatively stable and the deoxymyoglobin reversibly binds ligands. Interestingly, the O2 affinity of the reconstituted myoglobin, 1.1 x 109 M-1, is a significant 1,400-fold higher than that of the native myoglobin. Furthermore, the unfavorable autoxidation kinetics show 7-fold decrease in rate for the reconstituted myoglobin relative to the native myoglobin, indicating the stable oxy-form against autoxidation. The net results come from the slow dissociation of the O2 ligand in the reconstituted myoglobin, koff = 0.11 s-1, because of the formation of strong hydrogen bond between His64 and negatively charged dioxygen. The present study indicates that the replacement of native heme with an artificially created prosthetic group will give us a unique function into a hemoprotein.     

Self-crosslinkable polymers. I. Copolymerization of glycidyl methacrylate with 2-vinylpyridine and 2-vinyl-5-ethylpyridine

A soluble and self-crosslinkable linear copolymer with pendant epoxy and pyridyl groups was obtained from glycidyl methacrylate (M₁) and 2-vinylpyridine (M₂) or 2-vinyl-5-ethylpyridine (M₂) by the action of azobisisobutyronitrile. The monomer reactivity ratios were determined in tetrahydrofuran at 60°C: r₁ = 0.510, r₂ = 0.620 with 2-vinylpyridine and r₁ = 0.57, r₂ = 0.62 with 2-vinyl-5-ethylpyridine. These were consistent with the calculated values with the reported Q and e values for these monomers. The intrinsic viscosities of the copolymers with 2-vinylpyridine and with 2-vinyl-5-ethylpyridine were found to be 0.17–0.19 and 0.26–0.38, respectively, in tetrahydrofuran at 30°C; they were independent of the copolymer composition. The copolymers were amorphous, had no clear melting points, and became insoluble crosslinked polymers under heating without further addition of any curing agents.     

On orthogonal groups over the integers of a non-dyadic local field

Let L be a lattice in a quadratic space over a non-dyadic local field. We shall answer the question: What are the lattices whose unit groups coincide with that of L? If the residue class field has more than three elements the question is easy. In this case such a lattice must be $\text{a}$L or $\text{a}$L^# with a fractional ideal $\text{a}$ and the dual lattice L^# by Satz 2 of A. Kallmann, M. Kneser, and U. Stuhler (J. Reine Angew. Math.258 (1978), 51–54) or Theorem 5.2 of C. R. Riehm (Amer. J. Math.89 (1967), 549–577). But it is not easy in the case of the residue class field of three elements.     

Characterization of two polysaccharides having activity on the reticuloendothelial system from the root of Glycyrrhiza uralensis

Two polysaccharides, called glycyrrhizans UA and UB, were isolated from the root of Glycyrrhiza uralensis Fischer. They were homogeneous on electrophoresis and gel chromatography, and showed reticuloendothelial system-potentiating activity in a carbon clearance test. Glycyrrhizan UA is composed of L-arabinose: D-galactose: L-rhamnose: D-galacturonic acid in the molar ratio of 20:14:1:3, and glycyrrhizan UB is composed of L-arabinose: D-galactose: D-glucose: L-rhamnose: D-galacturonic acid in the molar ratio of 12:10:1:10:20, in addition to small amounts of O-acetyl groups and peptide moiety, respectively. About 10% (glycyrrhizan UA) and 35% (glycyrrhizan UB) of the D-galacturonic acid residues exist as the methyl esters. Methylation analysis, carbon-13 nuclear magnetic resonance and periodate oxidation studies indicated their structural features.     

NMR and quantum chemical study on the OH...pi and CH...O interactions between trehalose and unsaturated fatty acids: implication for the mechanism of antioxidant function of trehalose

Trehalose is a disaccharide that attracts much attention as a stress protectant. In this study, we investigated the mechanism of the antioxidant function of trehalose. The spin-lattice relaxation times (T(1)) of (1)H and (13)C NMR spectra were measured to investigate the interaction between trehalose and unsaturated fatty acid (UFA). We selected several kinds of UFA that differ in the number of double bonds and in their configurations (cis or trans). Several other disaccharides (sucrose, maltose, neotrehalose, maltitol, and sorbitol) were also analyzed by NMR. The T(1) values for the (1)H and (13)C signals assigned to the olefin double bonds in UFA decrease with increasing concentration of trehalose and the changes reaches plateaus at integer ratios of trehalose to UFA. The characteristic T(1) change is observed only for the combination of trehalose and UFA with cis double bond(s). On the other hand, from the (13)C-T(1) measurements for trehalose, the T(1) values of the C-3 (C-3') and C-6' (C-6) are found to change remarkably by addition of UFA. (1)H[bond](1)H NOESY measurements provide direct evidence for complexation of trehalose with linoleic acid. These results indicate that one trehalose molecule stoichiometrically interacts with one cis-olefin double bond of UFA. Computer modeling study indicates that trehalose forms a stable complex with an olefin double bond through OH...pi and CH...O types of hydrogen bonding. Furthermore, a significant increase in the activation energy is found for hydrogen abstraction reaction from the methylene group located between the double bonds that are both interacting with the trehalose molecules. Therefore, trehalose has a significant depression effect on the oxidation of UFA through the weak interaction with the double bond(s). This is the first study to elucidate the antioxidant function of trehalose.     

Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

Ruthenium-catalyzed arylation of 2-alkenylpyridines with aryl bromides: alternative E,Z-selectivity to Mizoroki-Heck reaction

Regio- and stereoselective arylation of 2-alkenylpyridines with aryl bromides is catalyzed by specific Ru(II)-phosphine complexes affording beta-arylated (Z)-2-alkenylpyridines, in which the aryl moiety is introduced cis to the pyridyl group. This geometrical selectivity is in sharp contrast to the Mizoroki-Heck reaction. [reaction: see text]     

Radical-initiated homo- and copolymerization of cyanomethyl methacrylate

The kinetics of cyanomethyl methacrylate (CyMA) homopolymerization was investigated in acetonitrile with azobisisobutyronitrile as initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.49[CyMA]^1.2 and the overall activation energy was calculated as 72.3 kJ/mol. Kinetic constants for CyMA polymerization were obtained as follows: k_p/k = 0.10 L^1/2s^?1/2; 2fk_d = 1.57 × 10^?5s^?. The relative reactivity ratios of CyMA(M₂) copolymerization with styrene (r₁ = 0.15, r₂ = 0.29) and methyl methacrylate (r₁ = 0.43, r₂ = 0.75) in acetonitrile were obtained. Applying the Q-e scheme (in styrene copolymerization) led to Q = 1.64 and e = 0.98. The glass transition temperature T_g of poly(CyMA) was observed to be 91°C by thermomechanical analysis. Thermogravimetry of poly(CyMA) showed a 10% weight loss at 265°C in air.