Photophysical properties of oligo(2,3-thienyleneethynylene)s

Photophysical properties of oligo(2,3-thienyleneethynylene)s (nTE, n denotes the number of thiophene rings, n = 2, 3) in benzene were investigated using steady-state, time-resolved fluorescence, and transient absorption spectroscopies. For 2TE, generation of the radiative S2 and nonradiative S1 states was confirmed. Upon excitation, the S2 state was initially generated and deactivated to the S1 state within 10 ps. The S1 state exhibited the transient absorption band at 470 nm, of which the lifetime was estimated to be 5.3 ns. In the case of 3TE, on the other hand, it was revealed that the radiative S1 state with a transient absorption peak at 650 nm was generated upon excitation. The T1 states of nTE were generated from the S1 states. The quantum yields were estimated to be 0.52 and 0.54 for 2TE and 3TE, respectively. Extremely fast reactions in the higher triplet excited state were indicated for both 2TE and 3TE.     

Thermoswitching property in TCNQ salts of ionenes containing poly(ethylene oxide) segments

Ionene polymers characterized by the alternating structure of ionene and crystalline poly(ethylene oxide) (PEO) segments were prepared as a function of PEO segment size. A microstructure of these ionenes and their 7,7,8,8-tetracyanoquinodimethane (TCNQ) salts were investigated with x-ray diffraction patterns, thermal scanning behavior, and polarizing micrographs. On the basis of this microstructure, the change in resistivity with temperature was studied. In Arrhenius' plots of the resistivity the simple salts in which the spherulites consisting of the PEO segments were observed showed a sharp decrease in resistivity with a rise in temperature [critical temperature resistor (CTR)] at about the melting point of the PEO segments, whereas the other simple salts in which the spherulites were not observed showed linear temperature dependence. The switching properties were confirmed similarly in repetitive heating/cooling cycles. This CTR characteristic was attributed to an increase in continuity in the conduction paths by melting spherulites. The apparent switching properties were not observed in the complex salts.     

Catalyzed collapse and enhanced hydrogen storage of BN nanotubes

The novel morphology of BN nanotubes with a collapsed structure has been discovered by a metal-catalyzed treatment. The collapse causes the dramatic enlargement of a specific surface area of BN nanotubes and remarkably enhances the hydrogen storage capacity of BN nanotubes.     

Extraction equilibrium of palladium(II) with 2-methyl-8-quinolinol into supercritical carbon dioxide fluid

The present study is concerned with the extraction behavior and equilibrium of Pd(II) with 2-methyl-8-quinolinol (HMQ) into supercritical fluid CO(2) (SF-CO(2)). Pd(II)-HMQ complex extracted from a weakly acidic solution (pH 2-3) into SF-CO(2) was determined to be Pd(MQ)(2) on the basis of a slope analysis. The extraction constant K(ex,SF) (=[Pd(MQ)(2)](SF)[H(+)](2)[Cl(-)](4)[PdCl(4)(2-)](-1)[HMQ](-2)) was determined to be 10(4.3+/-0.2) at 8.5 MPa, 45 degrees C and I=0.4 M (H,Na)Cl (1 M=1 mol dm(-3)). The distribution behavior of HMQ between an aqueous and a SF-CO(2) phase was examined so as to discuss quantitatively the extraction equilibrium. The extraction constant (K(ex,Cy)) of Pd(II) with HMQ into cyclohexane with a similar polarity to SF-CO(2) was determined and the K(ex,SF) was compared with the K(ex,Cy). Pd(II) at the concentration range of 10(-5)-10(-4) M in the aqueous solution (pH<3) containing relatively high concentration of chloride ion was found to be extracted efficiently by the SF-CO(2) extraction.     

Synthesis of Ultrafine SiC Powders from Carbon-Silica Hybridized Precursors with Carbothermic Reduction

Inorganic-organic hybrid gels were prepared by simultaneous condensation of the liquid mixture of ethyl silicate, ethyl borate and water soluble phenol resin with low molecular weight. The liquid mixtures were changed into lightly colored transparent gels after a catalyst addition and stirring. The obtained gels were crushed, dried and fired in controlled conditions to yield the inorganic precursors. Since the tailored inorganic precursors mainly consisted of SiO2 and carbon, silicon carbide was formed with the heat treatments in an Ar atmosphere beyond 1773 K with carbothermic reduction. The properties and morphology of the formed silicon carbide powders in terms of the starting precursor compositions and the conditions of the carbothermic reduction were investigated with SEM, XRD and TG-DTA analysis.     

Cloning and characterization of an active fragment of luciferase from a luminescent marine alga, Pyrocystis lunula

Two marine dinoflagellates, Lingulodinium polyedrum and Pyrocystis lunula, emit light in a reaction involving the enzymatic oxidation of its tetrapyrrole luciferin by molecular oxygen. The characteristic properties of P. lunula luciferase have not been clarified, whereas L. polyedrum luciferase, which has three active domains, has been characterized. A cloned partial cDNA of the P. lunula luciferase encodes an active fragment corresponding to part of domain 2 and all of domain 3 of L. polyedrum luciferase. The homology of the amino acid sequence between the two luciferases in domain 3 is about 84.3%. A recombinant His-tagged luciferase fragment containing domain 3 (Mr = 46 kDa) catalyzed the light-emitting oxidation of luciferin (lambdamax = 474 nm). This protein was purified by a single affinity-chromatography procedure. The pH-activity profile and the bioluminescence spectrum of the recombinant enzyme having a third domain are almost identical to those of an extract from P. lunula cultured in vitro. The recombinant enzyme is active at pH 8.0, although the recombinant enzyme derived from the second domain of L. polyedrum luciferase is inactive at pH 8.0. Substitution of Glu-201 by histidine in the third domain of P. lunula luciferase showed a decrease of activity above pH 7.0, suggesting that histidine residues could be responsible for pH-sensitivity in dinoflagellate luciferase.     

Polyimides having pendant hydroxy and acetoxy groups. I. Synthesis of polyimides from pyromellitimide and bisepoxides

Polyimides having pendant hydroxy groups were prepared by addition of pyromellitimide with bisepoxides. Tertiary amines and quaternary ammonium halides were effective as a catalyst. The polyimides were soluble in dichloroacetic acid and had inherent viscosities in the range 0.16–0.19 dl/g. Thermogravimetric analysis showed that a rapid weight loss of the polymers occurred at about 400°C. The pendant hydroxy groups were easily acetylated by treating the polymers with a mixture of acetic anhydride and pyridine. The acetylated polyimides were soluble in dimethylformamide, dimethylacetamide, and dioxane and melted at 120–150°C.     

Layer-by-layer assembled multilayer films of titanate nanotubes, Ag- or Au-loaded nanotubes, and nanotubes/nanosheets with polycations

Aqueous suspensions of hydrothermally synthesized titanate nanotubes and poly(diallyldimethylammonium chloride) (PDDA) have been employed to fabricate multilayer films on various substrates in a layer-by-layer fashion. Atomic force microscopy displays the dense coverage of the substrate surface by the nanotubes. UV-vis absorption spectroscopy confirms the consecutive growth of PDDA/nanotube layer pairs. Single crystalline Ag and Au nanoparticles with narrow size distribution spatially correlating with the nanotubes have been obtained by treating the nanotubes with AgNO(3) or HAuCl(4) aqueous solution followed by chemical reduction. The noble metal nanoparticles show a strong surface plasmon absorption band. A multilayer film construction of the noble-metal-loaded nanotubes has also been achieved. This process has been further extended to the heteroassembly of nanotubes/nanosheets in different layer sequences.     

Preparation and separation of all possible rotamers of a stereochemical analog of meso-tartaric acid: optically inactive and optically active isomers of (R,S)-2,2′-bis(methoxycarbonyl)-6,6′-dimethyl-9,9′-bitriptycyl

All the three possible rotamers of the title compound were separated by chromatography, and unambiguously identified by NMR and X-ray analysis. One of the isomers was optically inactive C_i conformation. The other optical active forms were resolved to give a pair of enantiomers, which were characterized by optical rotation and CD spectra. Thus the optical inactivity of a compound such as meso-tartaric acid that can take C_i conformation in solution, is now ascribed to that the molecule has an optically inactive C_i conformer and equal amounts of optically active conformers, that are enantiomers, in solution.     

Synthetic studies on oxindole spiro-lactones with thalliumd(III) trinitrate: A formal total synthesis of (±)-tryptoquivaline G

(±)-Tryptoquivaline G was formally synthesized through shortened steps from tryptophan, in which oxidation with thallium(III) trinitrate(TTN) was effected at the crucial stage. The present work also constitutes the first synthesis of oxindole lactones carrying 2-alkyl quinazolinones.