Thermoswitching property in TCNQ salts of ionenes containing poly(ethylene oxide) segments

Ionene polymers characterized by the alternating structure of ionene and crystalline poly(ethylene oxide) (PEO) segments were prepared as a function of PEO segment size. A microstructure of these ionenes and their 7,7,8,8-tetracyanoquinodimethane (TCNQ) salts were investigated with x-ray diffraction patterns, thermal scanning behavior, and polarizing micrographs. On the basis of this microstructure, the change in resistivity with temperature was studied. In Arrhenius' plots of the resistivity the simple salts in which the spherulites consisting of the PEO segments were observed showed a sharp decrease in resistivity with a rise in temperature [critical temperature resistor (CTR)] at about the melting point of the PEO segments, whereas the other simple salts in which the spherulites were not observed showed linear temperature dependence. The switching properties were confirmed similarly in repetitive heating/cooling cycles. This CTR characteristic was attributed to an increase in continuity in the conduction paths by melting spherulites. The apparent switching properties were not observed in the complex salts.     

Catalyzed collapse and enhanced hydrogen storage of BN nanotubes

The novel morphology of BN nanotubes with a collapsed structure has been discovered by a metal-catalyzed treatment. The collapse causes the dramatic enlargement of a specific surface area of BN nanotubes and remarkably enhances the hydrogen storage capacity of BN nanotubes.     

Synthesis of Ultrafine SiC Powders from Carbon-Silica Hybridized Precursors with Carbothermic Reduction

Inorganic-organic hybrid gels were prepared by simultaneous condensation of the liquid mixture of ethyl silicate, ethyl borate and water soluble phenol resin with low molecular weight. The liquid mixtures were changed into lightly colored transparent gels after a catalyst addition and stirring. The obtained gels were crushed, dried and fired in controlled conditions to yield the inorganic precursors. Since the tailored inorganic precursors mainly consisted of SiO2 and carbon, silicon carbide was formed with the heat treatments in an Ar atmosphere beyond 1773 K with carbothermic reduction. The properties and morphology of the formed silicon carbide powders in terms of the starting precursor compositions and the conditions of the carbothermic reduction were investigated with SEM, XRD and TG-DTA analysis.     

Studies on topical antiinflammatory agents. I. Synthesis and vasoconstrictive activity of corticosteroid 17-succinyl esters

A series of 17-succinyl derivatives of four corticosteroids was prepared. They were tested for vasoconstrictive activity in humans, using 9 alpha-fluoro-11 beta, 21-dihydroxy-16 beta-methyl-17 alpha-valeryloxy-1,4-pregnadiene-3,20-dione (betamethasone 17-valerate, BV) as a standard. The activities of the 21-chloro 17-methylsuccinate compounds (6A, 6C and 6D) were greater than that of BV. A structure-activity relationship study showed that the activities of the 21-chloro 17-methylsuccinates were more potent than those of the corresponding 21-esters.     

Polyimides having pendant hydroxy and acetoxy groups. I. Synthesis of polyimides from pyromellitimide and bisepoxides

Polyimides having pendant hydroxy groups were prepared by addition of pyromellitimide with bisepoxides. Tertiary amines and quaternary ammonium halides were effective as a catalyst. The polyimides were soluble in dichloroacetic acid and had inherent viscosities in the range 0.16–0.19 dl/g. Thermogravimetric analysis showed that a rapid weight loss of the polymers occurred at about 400°C. The pendant hydroxy groups were easily acetylated by treating the polymers with a mixture of acetic anhydride and pyridine. The acetylated polyimides were soluble in dimethylformamide, dimethylacetamide, and dioxane and melted at 120–150°C.     

Layer-by-layer assembled multilayer films of titanate nanotubes, Ag- or Au-loaded nanotubes, and nanotubes/nanosheets with polycations

Aqueous suspensions of hydrothermally synthesized titanate nanotubes and poly(diallyldimethylammonium chloride) (PDDA) have been employed to fabricate multilayer films on various substrates in a layer-by-layer fashion. Atomic force microscopy displays the dense coverage of the substrate surface by the nanotubes. UV-vis absorption spectroscopy confirms the consecutive growth of PDDA/nanotube layer pairs. Single crystalline Ag and Au nanoparticles with narrow size distribution spatially correlating with the nanotubes have been obtained by treating the nanotubes with AgNO(3) or HAuCl(4) aqueous solution followed by chemical reduction. The noble metal nanoparticles show a strong surface plasmon absorption band. A multilayer film construction of the noble-metal-loaded nanotubes has also been achieved. This process has been further extended to the heteroassembly of nanotubes/nanosheets in different layer sequences.     

Optically active 2-p-tolylsulfinylacrylate a novel chiral dienophile which exhibits high reactivity and diastereoselectivity

The Diels-Alder reaction of a novel chiral dienophile, alkyl ($\text{S}$)-2-$\text{p}$-tolylsulfinylacrylates 1 with anthracene and cyclopentadiene showed high diastereoselectivity under the chelation controlled condition.     

Selective desorption and analysis of humic substances on suspended particles in river water

The elemental analysis and morphology of individual particles indicate that the dominant suspended particles in river water are kaolin covered with hydrated iron(III) oxide which strongly sorbs humic substances. Suspended particles, about 1 mg, collected from 250 ml of water by centrifugation, are treated with 0.7 ml of 0.1M sodium hydroxide to desorb humic substances. Approximately 60% of copper and 30% of lead on or in suspended particles exist as humic complexes.     

Growth of self-organized hierarchical ZnO nanoarchitectures by a simple In/In2S3 controlled thermal evaporation process

Novel hierarchical ZnO nanoarchitectures, such as microtrepangs, microbelts, nanoflowers, nanocombs, nanowheels, and nanofans assembled by ZnO nanocones, nanobowling pins, nanobottles, nanoarrows, and nanonails, have had their growth controlled by the thermal evaporation of Zn and a mixture of In and In2S3. Both the morphologies of the products and their construction units could be efficiently controlled by simple adjustment of the weight ratio of In/In2S3. The phase structure, morphologies, and photoluminescence properties of the ZnO products were investigated by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and photoluminescence spectroscopy. These novel hierarchical ZnO nanoarchitectures may be attractive building blocks for creating optical or other nanodevices.     

Preparation and properties of aromatic copolyamides from aromatic diisocyanates and aromatic dicarboxylic acids

Wholly aromatic random copolyamides of high molecular weights were prepared by the high-temperature solution polycondensation of an aromatic diisocyanate, 4,4′-methylenedi(phenyl isocyanate) or 2,4-tolylene diisocyanate, with a mixture of isophthalic acid and 4,4′-oxydibenzoic acid. Glass transition temperatures of the polyamides and copolyamides were between 229 and 273°C; this depended on the combination of diisocyanates and dicarboxylic acids used. These aromatic copolyamides showed better solubility in various organic solvents and reduced crystallinity, compared to the corresponding homopolyamides. The copolyamides prepared from 2,4-tolylene diisocyanate had greater solubility and higher glass transition temperatures than those obtained from 4,4′-methylenedi(phenyl isocyanate).