Radical-initiated homo- and copolymerization of α-methylene-γ-butyrolactone

The kinetics of α-methylene-γ-butyrolactone (α-MBL) homopolymerization was investigated in N,N-dimethylformamide (DMF) with azobis(isobutyronitrile) as initiator. The rate of polymerization (R_p) was expresed by R_p = k[AIBN]^0.54[α-MBL]^1.1 and the overall activation energy was calculated as 76.1 kJ/mol. Kinetic constants for α-MBL polymerization were obtained as follows: k_p/k_t^1/2 = 0.161 L^1/2 mol^?1/2·s^?1/2; 2fk_d = 2.18 × 10^?5 s^?1. The relative reactivity ratios of α-MBL(M₂) copolymerization with styrene (r₁ = 0.14, r₂ = 0.87) were obtained. Applying the Q–e scheme led to Q = 2.2 and e = 0.65. These Q and e values for α-MBL are higher than those for MMA     

Transmission electron microscopy study of an AlN nucleation layer for the growth of GaN on a 7-degree off-oriented (0 0 1) Si substrate by metalorganic vapor phase epitaxy

We have investigated the morphology of the high-temperature-grown AlN nucleation layer and its role in the early stage of GaN growth, by means of transmission electron microscopy. The nitride was selectively grown on a 7-degree off-oriented (0 0 1) patterned Si substrate by metalorganic vapor phase epitaxy. AlN was deposited on the inclined unmasked (1 1 1) facet in the form of islands. The size of the islands varied along the slope, which is attributable to the diffusion of the growth species in the vapor phase. The GaN nucleation occurred at the region where rounded AlN islands formed densely. The threading dislocations were observed to generate in the GaN nucleated region.     

Self‐Assembled Fibers Containing Stable Organic Radical Moieties: Alignment and Magnetic Properties in Liquid Crystals

Macroscopically oriented stable organic radicals have been obtained by using a liquid–crystalline (LC) gel composed of an l ‐isoleucine‐based low molecular weight gelator containing a 2,2,6,6‐tetramethylpiperidine 1‐oxyl moiety. The LC gel has allowed magnetic measurements of the oriented organic radical. The gelator has formed fibrous aggregates in liquid crystals via intermolecular hydrogen bonds. The fibrous aggregates of the radical gelator are formed and oriented on cooling by applying a magnetic field to the mixture of liquid crystals and the gelator. Superconducting quantum interference device (SQUID) measurements have revealed that both oriented and nonoriented fibrous aggregates exhibited antiferromagnetic interactions, in which super‐exchange interaction constant J is estimated as ?0.89 cm^?1.     

Polyhydrazides. III. N-methylated polyhydrazides by ring-opening of poly-p-phenylene-1,3,4-oxadiazole

A new ring-opening reaction of 1,3,4-oxadiazole by methylating reagents was developed in fuming sulfuric acid or polyphosphoric acid and then, by applying this reaction to poly-p-phenylene-1,3,4-oxadiazole, a high molecular weight poly-N-methylterephthalylhydrazide was obtained. Various methylating reagents were investigated as ring-opening reagents. The degrees of ring-opening in polymers were estimated and related to the properties of the polymers.     

Linear free energy relationships for carbon-13 NMR chemical shifts of substituted benzoic acids1

In order to examine ¹³C-SCS of substituted benzoic acids, chemical shifts of the acid form (I) and the dissociated form (II) have been obtained separately. Single substituent parameters, σ⁰ or σ⁺ are correlated with the shifts for the carboxyl (δ_co) or ipso carbons (δ_ipso), respectively. Among the available five equations which are developed for the analysis with dual (or divided) substituent parameters (DSP), the Swain-Lupton equation (eqn 3) and the Taft-Swain-Lupton equation (eqn 4) give much better correlations, not only for δ_co and δ_ipso but also for the results for ring carbons (C(2), C(5), C(6)), except for those attached to or neighboured by substituents. It is concluded that the SCS of aromatic compounds are best analyzed with substituent parameters derived from reactions or equilibria on the basis of linear free energy relationships.     

Studies on the syntheses of heterocylic compounds—762: Synthesis of 3-benzyl-6-methyl-2-oxo-3,6-diazabicyclo[3.1.0]hexane as a synthetic intermediate of mitomycins

(±)-1-Benzyl-3α-hydroxy-4β-methylamino-2-oxopyrrolidine (15) and its cis-isomer (16) were synthesised from 1-benzyl-4-ethoxycarbonyl-2,3-dioxopyrrolidine (2) in several steps. The former (15) was converted to 3-benzyl-6-methyl-2-oxo-3,6-diazabicyclo[3.1.0]hexane (17) with a mixture of triphenylphosphine, carbon tetrachloride and triethylamine.     

Synthesis of benzylidene-pendant polyphthalimidines from flexible bisphthalides and various diamines

New polyphthalimidine-forming monomers, 5,5′-(oxydi-p-phenylenedicarbonyl)bis(3-benzylidenephthalide) and the 6,6′-derivative, were synthesized by the Friedel–Crafts reaction of diphenyl ether with 5- and 6-chloroformyl-3-benzylidenephthalide, respectively. The direct polycondensation of these bisphthalides with both aliphatic and aromatic diamines in o-phenylphenol at 200–250°C afforded polyphthalimidines having inherent viscosities of 0.2–1.2 dL/g in almost quantitative yields. Syntheses of aliphatic polyphthalimidines with higher inherent viscosities were also achieved by a two-step procedure involving ring-opening polyaddition and subsequent thermal cyclodehydration. All the polymers were amorphous and readily soluble in N-methyl-2-pyrrolidone (NMP), m-cresol, nitrobenzene, pyridine, and chloroform. Tough and flexible films could be cast from NMP solutions of the polymers. Glass transition temperatures of the polyphthalimidines were in the range of 158–246°C. The thermogravimetry of the aromatic polymers showed 10% weight loss in air and nitrogen at 445–515 and 500–520°C, respectively. The crosslinking reaction of some benzylidenependant polyphthalimidines took place at 300°C through double-bond addition to afford cured polymers with improved thermal stability.     

Polyimides having pendant hydroxy and acetoxy groups. I. Synthesis of polyimides from pyromellitimide and bisepoxides

Polyimides having pendant hydroxy groups were prepared by addition of pyromellitimide with bisepoxides. Tertiary amines and quaternary ammonium halides were effective as a catalyst. The polyimides were soluble in dichloroacetic acid and had inherent viscosities in the range 0.16–0.19 dl/g. Thermogravimetric analysis showed that a rapid weight loss of the polymers occurred at about 400°C. The pendant hydroxy groups were easily acetylated by treating the polymers with a mixture of acetic anhydride and pyridine. The acetylated polyimides were soluble in dimethylformamide, dimethylacetamide, and dioxane and melted at 120–150°C.