Control of Axial Chirality by Planar Chirality Based on Optically Active [2.2]Paracyclophane

Optically active X-shaped molecules based on the planar chiral [2.2]paracyclophane building block were prepared, in which di(methoxy)terphenyl units were stacked on the central benzene rings. At 25 °C, anisolyl rings freely rotate in solution, while in the crystal form, they are fixed by intramolecular CH–π interactions, thereby leading to the expression of the axial chirality, i.e., propeller chirality was exhibited by the planar chiral [2.2]paracyclophane moiety. The X-shaped molecule exhibited good circularly polarized luminescence (CPL) profiles with moderate Φ_PL and a large g_lum value in the order of 10⁻³ at 25 °C, in solution. In contrast, at −120 °C, dual CPL emission with opposite signs was observed. According to the theoretical studies, the rotary motion of the anisolyl units is suppressed in the excited states, and so emission from two isomers could be observed. These results demonstrate that the axial chirality was controlled by the planar chirality, leading ultimately to propeller chirality.     

Potassium-ion-selective sensing based on selective reflection of cholesteric liquid crystal membranes

It is well-known that cholesteric liquid crystals have an optical property, selective reflection, due to changes in the pitch of their helical structure. This unique property of cholesteric liquid crystals can be used to attain a visual sensing system showing color changes as the detection signal. In this paper, we report a visual sensing membrane comprising cholesteric liquid crystals, in which a 15-crown-5 derivative was incorporated as ion recognizing sites, for K⁺ in aqueous solution. The resulting CLC membrane showed a shift of the reflection peak sensitive to K⁺ in water. We have also designed polymer-dispersed liquid crystal membranes that showed ion-selective reflection peak shifts with improved response time.     

3,4-Thienylene-ethynylene Oligomers

Several well-defined 3,4-thienylene-ethynylene oligomers with different chain lengths have been synthesized and characterized. X-Ray crystallographic analyses proved their unique, totally helical conformations.     

The structural changes in crystalline cellulose and effects on enzymatic digestibility

The enzymatic hydrolysis of cellulose I achieves almost complete digestion when sufficient enzyme loading as much as 20 mg/g-substrate is applied. However, the yield of digestion reaches the limit when the enzyme dosage is decreased to 2 mg/g-substrate. Therefore, we have performed three pretreatments such as mercerization, dissolution into phosphoric acid and EDA treatment. Transformation into cellulose II hydrate by mercerization and dissolution into phosphoric acid were not sufficient because substrate changed to highly crystalline structure during saccharification. On the other hand, in the case of crystalline conversion of cellulose I to III_I by EDA, almost perfect digestion was achieved even in enzyme loading as small as 0.5 mg/g-substrate, furthermore, hydrolyzed residue was typical cellulose I. The structural analysis of substrate after saccharification provides an insight into relationships between cellulose crystalline property and cellulase toward better enzymatic digestion.     

Self‐Assembled Fibers Containing Stable Organic Radical Moieties: Alignment and Magnetic Properties in Liquid Crystals

Macroscopically oriented stable organic radicals have been obtained by using a liquid–crystalline (LC) gel composed of an l ‐isoleucine‐based low molecular weight gelator containing a 2,2,6,6‐tetramethylpiperidine 1‐oxyl moiety. The LC gel has allowed magnetic measurements of the oriented organic radical. The gelator has formed fibrous aggregates in liquid crystals via intermolecular hydrogen bonds. The fibrous aggregates of the radical gelator are formed and oriented on cooling by applying a magnetic field to the mixture of liquid crystals and the gelator. Superconducting quantum interference device (SQUID) measurements have revealed that both oriented and nonoriented fibrous aggregates exhibited antiferromagnetic interactions, in which super‐exchange interaction constant J is estimated as ?0.89 cm^?1.     

Abnormal Li diffusion in β-LiGa by the formation of defect complex

The diffusion coefficients of Li in the NaTl-type Li intermetallic compound of β-LiGa have been measured by using a short-lived radioactive diffusion tracer. As the tracer, the α-emitting radioisotope of ⁸Li delivered as the energetic and pulsed beam from Tokai Radioactive Ion Accelerator Complex (TRIAC) was implanted into the β-LiGa compounds with the composition in the range of about 43 to 54 at.% Li. By analyzing the time-dependent yields of the α-particles measured according to the repetition cycle of the beam, the tracer diffusion coefficients were extracted over the wide range of Li composition. Abnormal composition-dependence of Li diffusion coefficients in β-LiGa was observed; the stoichiometric β-LiGa showed the highest diffusivity of Li. By referring to the composition-dependent diffusivity of Li in the iso-structural β-LiAl and β-LiIn, we could identify the abnormal diffusion of Li in very Li-poor composition of β-LiGa. The anomaly has been discussed qualitatively in terms of the formation of defect complex and the interaction between the constitutional defects.     

Effect of Solvent on the Radical Copolymerizability of Styrene with Acrylonitrile

Radical copolymerization of styrene (St, M₁) with acrylonitrile (AN, M₂) has been carried out using azobisisobutylonitrile as an initiator in benzene, dimethylsulfoxide, acetonitrile, and ethanol at 60 and 80°C. Good linear correlationships were obtained by plotting the values of log r₁, log r₂, Q₂, and e₂ against those of vC[dbnd]N and vC[dbnd]C determined in the solvents: the increase in the interaction between AN and the solvent was found to decrease the values of log r₁ and e₂ but to increase those of log r₂ and Q₂. The results are discussed in terms of the solvation both in the ground state and in the transition state.     

Glycidyl Esters of Aromatic Acids

Abstract

The reaction of substituted benzoic acids, dicarboxylic acids such as phthalic, terephthalic, and isophthalic acids, and the sodium or potassium salts of these acids with equimolar or excess epichlorohydrin in the presence of benzyltrimethylammonium chloride has been studied using various solvents such as toluene, dioxane, monochlorobenzene, and tetrachloroethylene. Use of the free carboxylic acids gave only fair to low yields of glycidyl esters, while sodium or potassium salts of the carboxylic acids gave excellent yields of materials of high oxirane content. The epoxidation of chlorohydrin esters of these acids by the dehydrochlorination was also studied using various dehydrochlorinating reagents such as NaOH, KOH, Na₂CO₃, and NaAlO₂ in such solvents as water, dichloromethane, dioxane, and monochlorobenzene at various temperatures. Reaction time, reaction temperature, and water content were found to influence the yield of glycidyl esters. It is suggested that the reaction path involves nucleophilic attack upon the terminal position of the epoxide or epichlorohydrin. The resulting alkoxide then reacts further to give either a glycidyl ester or a chlorine-containing by-product, the predominant course depending upon reaction conditions.     

DNA sensor: A novel electrochemical gene detection method using carbon electrode immobilized DNA probes

Abstract

The authors have developed a novel, rapid, convenient, and specific gene detection method, named the ‘DNA sensor,’ using a graphite electrode loaded with DNA probes. Synthesized oligonucleotide (5-TGCAGTTCCGGTGGCTGATC-3′) complementary to oncogene v-myc was employed for a model probe. The oligonucleotide was chemically adsorbed on a basal plane pyrolytic graphite (BPPG) electrode. The sensor was able to be applied to a hybridization reaction (40°C) in a linearized pVM623 solution carrying the Pst I fragment of v-myc (1.5 kbp).

After the hybridization reaction, the sensor was immersed into an acridine orange solution (1 μM) and washed with a phosphate buffer (pH 7.0). Acridine orange intercalated between base pairs of the formed double stranded DNAs on the electrode. The anodic peak potential of acridine orange that interacted with the DNAs on the electrode was measured. The positive shift of the peak potential increased in proportional to the pVM623 concentration in the hybridization reaction. 10^?1 g/ml of pVM623 was able to be detected in the buffer solution using the sensor. This gene detection was completed within an hour.