Improved assay for catechol-O-methyltransferase activity utilizing norepinephrine as an enzymatic substrate and reversed-phase high-performance liquid chromatography with fluorescence detection

We have previously established a rapid catechol-O-methyltransferase (COMT) assay using norepinephrine (NE) as a natural substrate and flow-injection analysis. In this study, the method is improved for screening of COMT inhibitors or activators using reversed-phase high-performance liquid chromatographic separation with fluorescence detection. The excess substrate, NE, was removed by the addition of borate in the eluent for HPLC to make an ionic complex with NE, which was eluted faster than the enzymatic product, normetanephrine. The method had good precision and accuracy, and was able to assay one sample in 5 min, showing the usability for screening of COMT inhibitors or activators.     

γ-irradiation of polypropylene in vacuum and in air

Polypropylene films were irradiated with ⁶⁰Co γ-rays in vacuum or in air and stored in air. Just after irradiation, the concentration of carbonyl group of the sample irradiated in air only increased with dose. The concentrations of both samples increased with storage time. The more the absorbed doses, the higher the increasing rates. The increasing rate of the concentration of carbonyl group during irradiation in air was higher than those during storage in air. Just after irradiation, the tensile strengths and the elongations of the both samples somewhat increased with dose at the doses less than 5 Mrad, but decreased at doses more than 13 Mrad. The tensile strength and the elongation of the sample irradiated in air decreased with storage time. Those of the sample irradiated in vacuum also decreased with storage time but the decreasing rates were much smaller than those in the sample irradiated in air. The gel fractions of the samples irradiated in vacuum and annealed in vacuum were somewhat higher than those irradiated in vacuum and not annealed. To elucidate high oxidation rate in the sample irradiated in air during and after irradiation, reaction mechanisms were discussed. To clarify the difference of mechanical properties between the samples irradiated in vacuum and in air, the effect of crosslink was considered, together with the oxidation.     

Growth of self-organized hierarchical ZnO nanoarchitectures by a simple In/In2S3 controlled thermal evaporation process

Novel hierarchical ZnO nanoarchitectures, such as microtrepangs, microbelts, nanoflowers, nanocombs, nanowheels, and nanofans assembled by ZnO nanocones, nanobowling pins, nanobottles, nanoarrows, and nanonails, have had their growth controlled by the thermal evaporation of Zn and a mixture of In and In2S3. Both the morphologies of the products and their construction units could be efficiently controlled by simple adjustment of the weight ratio of In/In2S3. The phase structure, morphologies, and photoluminescence properties of the ZnO products were investigated by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and photoluminescence spectroscopy. These novel hierarchical ZnO nanoarchitectures may be attractive building blocks for creating optical or other nanodevices.     

Preparation and properties of aromatic copolyamides from aromatic diisocyanates and aromatic dicarboxylic acids

Wholly aromatic random copolyamides of high molecular weights were prepared by the high-temperature solution polycondensation of an aromatic diisocyanate, 4,4′-methylenedi(phenyl isocyanate) or 2,4-tolylene diisocyanate, with a mixture of isophthalic acid and 4,4′-oxydibenzoic acid. Glass transition temperatures of the polyamides and copolyamides were between 229 and 273°C; this depended on the combination of diisocyanates and dicarboxylic acids used. These aromatic copolyamides showed better solubility in various organic solvents and reduced crystallinity, compared to the corresponding homopolyamides. The copolyamides prepared from 2,4-tolylene diisocyanate had greater solubility and higher glass transition temperatures than those obtained from 4,4′-methylenedi(phenyl isocyanate).     

Design and synthesis of novel type somatostatin analogs with antiproliferative activities on A431 tumor cells

It was reported that the somatostatin analog TT-232, d-Phe-c(Cys-Tyr-d-Trp-Lys-Cys)-Thr-NH₂, exhibited a highly potent antitumor activity in vitro and in vivo. Using pyrazinone analogs and aliphatic amino acids instead of the disulfide bond, we prepared novel type somatostatin analogs including the sequence essential for antitumor activities, Tyr-d-Trp-Lys. These analogs exhibited antiproliferative effect on A431 tumor cells.     

Cross-chiral examinations of molecular enantioselective recognition by fast atom bombardment mass spectrometry: Host–guest complexations between chiral crown ethers and chiral organic ammonium ions

Using fast atom bombardment (FAB) mass spectrometry (MS), cross-chiral relationships were confirmed for the first time for the diasteromeric host-guest complexations between the chiral crown ether host (1) and the chiral organic ammonium ion guest (2) on the basis of the relative peak intensities (RPI). Both host–guest combinations (R, R, R, R) – 1, (R) – 2 and (S, S, S, S) – 1, (S) – 2 obviously provided larger RPI values than the combination of both (R, R, R, R) – 1, (S) – 2 and (S, S, S, S) – 1, (R) – 2 by a factor of 1.6 as an averaged value: 1.87 (n = 4)/1.16 (n = 4) = 1.6. These results are consistent with the expected stabilities of the host-guest complexations by CPK model examinations. Successfully observed cross-chiral examinations strongly suggest a potentially useful FABMS/RPI methodology for rapidly searching newly designed and synthesized crown ether-like host compounds with a higher degree of enantioselectivity.     

Amplification of chirality from molecules into morphology of crystals through molecular recognition

We have found a novel type of morphological chiral tuning on inorganic helical crystals through stereochemical recognition of organic molecules. Helical forms consisting of twisted twins emerged from triclinic crystals under diffusion-limited conditions. The proportion of the right- and left-handed helices was precisely tuned with the addition of a specified amount of chiral molecules, such as d- and l-glutamic acids. The chiral molecules recognized the enantiomeric surface of the triclinic crystal and then changed the growth behavior of the helical morphology. As a result, the microscopic chiral information, at a molecular level, was amplified into the macroscopic helices consisting of inorganic achiral components.     

Photocatalytic Reduction of NO with C2H6 on a Hollandite-Type Catalyst

The photocatalytic reduction of nitrogen monoxide (NO) with ethane on the hollandite type catalyst (K₂Ga₂Sn₆O₁₆KGSO) was investigated. Using a closed-gas circulating system equipped with a Q-MASS detector and in-situ diffuse reflectance FT-IR spectroscopy. The reactant gases of NO and ¹³C₂H₆ decreased with the increasing irradiation time. In contrast, the N₂ yield increased proportionally to the conversion of ¹³C₂H₆. Nitrogen oxides such as N₂O did not reach their detectable levels. The NO adsorbed on KGSO was found to change to its activated species by UV irradiation. The oxidized products of C₂H₆ such as CH₃CHO increased in proportion to the reaction time. The present results strongly suggest that KGSO has remarkable photocatalytic activity for the reduction of NO with C₂H₆.     

Radical-initiated homo- and copolymerization of α-methylene-γ-butyrolactone

The kinetics of α-methylene-γ-butyrolactone (α-MBL) homopolymerization was investigated in N,N-dimethylformamide (DMF) with azobis(isobutyronitrile) as initiator. The rate of polymerization (R_p) was expresed by R_p = k[AIBN]^0.54[α-MBL]^1.1 and the overall activation energy was calculated as 76.1 kJ/mol. Kinetic constants for α-MBL polymerization were obtained as follows: k_p/k_t^1/2 = 0.161 L^1/2 mol^?1/2·s^?1/2; 2fk_d = 2.18 × 10^?5 s^?1. The relative reactivity ratios of α-MBL(M₂) copolymerization with styrene (r₁ = 0.14, r₂ = 0.87) were obtained. Applying the Q–e scheme led to Q = 2.2 and e = 0.65. These Q and e values for α-MBL are higher than those for MMA     

Blue myoglobin reconstituted with an iron porphycene shows extremely high oxygen affinity

Myoglobin will be a good scaffold for engineering a function into proteins. To modulate the physiological function of myoglobin, almost all approaches have been demonstrated by site-directed mutagenesis, however, there are few studies which show a significant improvement in the function. In contrast, we focused on the replacement of heme in the protein with an artificial prosthetic group. Recently, we prepared a novel myoglobin reconstituted with an iron porphycene as a structural isomer of mesoheme. The bluish colored reconstituted myoglobin is relatively stable and the deoxymyoglobin reversibly binds ligands. Interestingly, the O2 affinity of the reconstituted myoglobin, 1.1 x 109 M-1, is a significant 1,400-fold higher than that of the native myoglobin. Furthermore, the unfavorable autoxidation kinetics show 7-fold decrease in rate for the reconstituted myoglobin relative to the native myoglobin, indicating the stable oxy-form against autoxidation. The net results come from the slow dissociation of the O2 ligand in the reconstituted myoglobin, koff = 0.11 s-1, because of the formation of strong hydrogen bond between His64 and negatively charged dioxygen. The present study indicates that the replacement of native heme with an artificially created prosthetic group will give us a unique function into a hemoprotein.