Quantitative Detection for Porphyromonas gingivalis in Tooth Pocket and Saliva by Portable Electrochemical DNA Sensor Linked with PCR

Here, a quantitative electrochemical analysis of periodontal bacteria in gingival crevicular fluid (GCF) and saliva by direct polymerase chain reaction (PCR) is presented. The electrochemical measurement was performed by mixing with PCR products and electrochemical indicator (bisbenzimidazole trihydrochloride). The peak current of indicator is reduced due to slower diffusion when the dye intercalates into the amplified DNA, and the degree of reduction in the peak current is correlates with the quantity of amplified DNA. Therefore, a quantitative analysis is possible by using our electrochemical method at the end point of PCR. In the GCF testing, The number of Porphyromonas gingivalis (Pg) detected by our electrochemical method at the end point of PCR were almost same compared with that were calculated by the conventional method of quantitative real? time PCR. In the saliva testing, the relationship between number of Pg in saliva and average pocket depth, and age‐dependence were also clearly observed. Since the saliva sample is obtained in a non‐invasive manner, this method is useful for the primary screening of periodontal disease. Moreover, our detection method is simple and uses a hand‐held potentiostat making it suitable for development of an on‐site periodontal diagnosis system.     

A novel small molecule fluorescent sensor for Zn2+ based on pyridine-pyridone scaffold

The development of a water-soluble and small molecular weight fluorescent probe, 3-(4-methoxyphenyl)-4-(methylsulfanyl)-6-(pyridin-2-yl)pyridin-2(1H)-one (3), for detecting Zn²⁺ based on pyridine-pyridone skeleton is reported. We observed a clear chelation enhanced fluorescence effect of 3 in the presence of Zn²⁺. Other fluorescent properties of 3 are discussed.     

Kinetic study of radical polymerization of dialkyl fumarates using electron spin resonance spectroscopy

The radical polymerization of dialkyl fumarates (DRF) bearing various ester alkyl groups was kinetically studied. The propagation and termination rate constants were determined using electron spin resonance (ESR) spectroscopy. The introduction of the bulky ester alkyl groups such as a tert-butyl group decreased the termination rate constant as expected. However, it has also been revealed that the bulky groups promote propagation despite the steric repulsion. The propagation rate and mechanism are discussed in relation to the propagation manner, i.e., tacticity of the polymer. © 1996 John Wiley & Sons, Inc.     

Chemical and Genetic Study of Ligularia cyathiceps in Yunnan Province of China

Root chemicals and evolutionarily neutral DNA regions in L. cyathiceps samples collected in the Zhongdian (Shangrila) County of Yunnan, P. R. China, were examined. Twenty compounds were isolated, including three new ones, 1β,10β‐epoxy‐6β‐(propionyloxy)furanoeremophilan‐9‐one ( 6 ), 1β,10β‐epoxy‐8α‐ethoxyeremophila‐6,11‐diene ( 14 ), and 11αH‐6β‐isobutyryloxy‐1β,10β,7β,8β‐diepoxyeremophilan‐12,8α‐olide ( 15 ). The chemical diversity was found to be limited, with cacalol ( 1 ) and 6‐(acyloxy)furanoeremophilan‐9‐ones ( 4 and/or 5 ) being major components in all the samples. The nuclear ribosomal RNA gene was also found to harbor little variation, although two distinct sequence types were found for the plastid atpB‐rbcL intergenic region.     

An intense pulsed positron beam

A positron pulsing system for an intense positron beam generated by an electron linac is reported. The pulsing system generates an intense pulsed positron beam of variable energy and variable pulse period. The pulsed positron beam is used as a non-destructive probe for various material research. In this paper, we also discuss applications of the pulsed positron beam: positron lifetime spectroscopy, age-momentum correlation spectroscopy, positronium time-of-flight measurement, and positron annihilation-induced Auger electron spectroscopy with a time-of-flight technique.     

Palladium-catalyzed aminoallylation of activated olefins with allylic halides and phthalimide

The three-component aminoallylation reaction of the activated olefins 2 with the phthalimide 1a and allyl chloride proceeded very smoothly in the presence of Pd(2)dba(3).CHCl(3) (5 mol %)/P(4-FC(6)H(4))(3) (40 mol %) and Cs(2)CO(3) (3 equiv against 2) in dichloromethane at room temperature to give the corresponding aminoallylated products, N-pent-4-enylphthalimides 3, in 58-99% yields. The reaction of oxazolidinone 1b also proceeded very smoothly to give N-(2,2-dicyano-1-phenylpent-4-enyl)oxazolidinone in a quantitative yield; however, the Tsuji-Trost-type allylation products 4 were obtained in the case of dibenzylamine, N-tosylaniline, and pyrrolidin-2-one. Further, 2 underwent cycloaddition with N-tosylvinylaziridine 9a in the presence of Pd(2)dba(3).CHCl(3) (5 mol %)/P(4-FC(6)H(4))(3) (40 mol %) in THF at room temperature, giving the corresponding pyrrolidines 11 in 69-99% yields.     

Synthesis of 2,3-dihydro-1H-inden-1-one derivatives via Ni-catalyzed intramolecular hydroacylation

An efficient synthetic method for the formation of 2,3-dihydro-1H-inden-1-one derivatives through a Ni-catalyzed intramolecular hydroacylation of 2-(prop-2-ynyl)benzaldehydes has been developed. Examination of various nickel and other transition metal catalysts and phosphine ligands showed that the use of Ni(COD)₂ catalyst combined with P(i-Pr)₃ ligand was the best choice to the success of the present intramolecular hydroacylation. A wide range of functional groups were tolerated, affording the corresponding substituted α-lidene-2,3-dihydro-1H-inden-1-ones in good to high yields with a sole E-selectivity under present reaction conditions.     

Theory of oxide high temperature superconductivity

We propose a model Hamiltonian for the high temperature superconductivity from the analogy of the BCS model hamiltonian. We seek a possibility of real space electron pairing. It follows then the magnetic exchange interaction is not a source of pairing and we propose a form of pairing interaction from the argument of the broken symmetry of electron number conservation. Based on a variational wave function, the ground state energy of our model is studied.     

Buffers to suppress sodium dodecyl sulfate adsorption to polyethylene oxide for protein separation on capillary polymer electrophoresis

Although polyethylene oxide (PEO) offers several advantages as a sieving polymer in SDS capillary polymer electrophoresis (SDS-CPE), solution properties of PEO cause deterioration in the electrophoresis because PEO in solution aggregates itself, degrades into smaller pieces, and forms polymer-micelle complexes with SDS. We examined protein separation on SDS-CPE with PEO as a sieving matrix in four individual buffer solutions: Tris-CHES, Tris-Gly, Tris-Tricine, and Tris-HCl buffers. The solution properties of PEO as a sieving matrix in those buffers were examined by dynamic light scattering (DLS) and by surface tension. Preferential SDS adsorption onto PEO disturbed protein-SDS complexation and impaired the protein separation efficiency. Substantial adsorption of SDS to PEO was particularly observed in Tris-Gly buffer. The Tris-CHES buffer prevented SDS from adsorbing onto the PEO. Only Tris-CHES buffer achieved separation of six proteins. This study demonstrated efficient protein separation on SDS-CPE with PEO.     

Bis(2-bromoethyl) selenium dibromide as the selenium-introducing reagent: One-pot preparation of 2,5-bis(alkoxymethyl)tetrahydroselenophenes by the cyclization of 1,5-hexadiene

The reaction of bis(2-bromoethyl)selenium dibromide (1a) with 1,5-hexadiene (2) in methanol or ethanol affords 2,5-bis(alkoxymethyl)tetrahydroselenophene-1,1-dibromides (R = CH₃ (3b), R = C₂H₅ (3c)) via 2,5-bis(bromomethyl)tetrahydroselenophene-1,1-dibromide (3a). The reaction of 1a with 2 in 1-propanol, 2-methyl-1-propanol or 1-butanol in the presence of sodium carbonate gave 2,5-bis(alkoxymethyl)tetrahydroselenophene (R = C₃H₇ (4a), R = (CH₃)₂CHCH₂ (4b) and R = C₄H₉ (4c)) via 3a. The ratios of the trans and cis isomers of 3a–3c are 3:2. In addition, the structure of trans-2,5-bis(methoxymethyl)tetrahydroselenophene-1,1-dibromide (trans-3b) was determined by X-ray crystallography.