Application of total reflection X-ray fluorescence spectrometry to small glass fragments.

Total reflection X-ray fluorescence spectrometry (TXRF) has been applied for trace elemental analysis of small glass fragments. A small glass sample (a fragment with weight less than 0.5 mg) was decomposed by 100 microg of HF/HNO3 acid; the material was condensed to 10 microl and was dried on a Si wafer. Since the size of the dried residue on the Si wafer was less than 1 cm in diameter, an incident X-ray beam with about 1 cm in width could effectively excite elemental components in such a small glass fragment. The precision of the present technique was checked by analyzing the glass fragments (<0.5 mg) from NIST SRM612; the relative standard deviations (RSD) of less than 8.1% were achieved for elemental ratios that were normalized by Sr. Fragments (<0.5 mg) obtained from 23 figured sheet glasses were used as samples for estimating the utility of this technique to forensic discrimination. Comparison of five elemental ratios of Ti/Sr, Mn/Sr, Zn/Sr, Rb/Sr, and Pb/Sr calculated from X-ray fluorescence spectra was effective in distinguishing glass fragments that could not be differentiated by their refractive indexes (RI).     

PHOTORECEPTOR CELL TYPES IN THE RETINA OF VARIOUS VERTEBRATE SPECIES: IMMUNOCYTOCHEMISTRY WITH ANTIBODIES AGAINST RHODOPSIN AND IODOPSIN

Types of photoreceptor cells in the retinas of 36 species of vertebrates (5 classes, 14 orders) were investigated immunocytochemically with monoclonal antibodies against chicken iodopsin (Io-mAb) and antiserum against bovine rhodopsin (Rh-As). In mammals, Rh-As labeled the outer segments of some photoreceptor cells in striped squirrels (a diurnal mammal) and those of most photoreceptor cells in mice (a nocturnal mammal), while Io-mAb labeled any photoreceptor cells in either of them. In all species of birds studied, Io-mAb labeled the principal and accessory members of double cones and single cones with a red oil droplet. Rh-As labeled single cones with a yellow or clear oil droplet in addition to rods. In turtles, both Rh-As and Io-mAb labeled single cones with a red or clear oil droplet and the principal (with a yellow oil droplet) and accessory members of double cones. This suggests that the visual pigments in these cones of turtles have common epitopes with bovine rhodopsin and chicken iodopsin. In Japanese grass lizards, single cones with a yellow oil droplet and double cones were immunoreactive to both Rh-As and Io-mAb. In snakes, rods and cones could not be distinguished but both positively and negatively stained cells were observed by the use of each antibody. In geckos, however, all photoreceptor cells were immunonegative to Io-mAb. In all species studied in amphibians, Rh-As labeled rods but not cones. Neither rods nor cones reacted with Io-mAb. In fishes, almost all species studied had well developed cones, and some of these cones were labeled by Rh-As. However, Io-mAb labeled the outer segments of some cones only in loaches. Rh-As labeled photoreceptor cells in all species of fishes studied. Thus, Rh-As recognized the outer segments of rods in all species studied from fishes to mammals, whereas the epitope recognized by Io-mAb is conserved in some species of fishes, most species of reptiles and all species of birds studied.     

Electromagnetophoretic force measurement of a single binding interaction between lectin and yeast cell surfaces.

A novel measurement method of the binding force between a micrometer-sized particle and a solid surface in an electrolyte solution has been established by using the electromagnetophoretic buoyancy on the particle. By this method, we investigated the binding force between a yeast cell surface and an oligosaccharide-binding protein, concanavalin A (Con A), fixed on a silica capillary wall. The force measurement was carried out up to 60 pN. In a lower surface concentration of Con A, yeast cells could be desorbed by a force less than 60 pN. However, in a higher surface concentration after treated by 1 mg ml(-1) solution, yeast cells were adsorbed with a force stronger than 60 pN. In this case, the addition of 10 mg ml(-1) D-mannose solution to the medium reduced the binding force to less than 60 pN. The observed adsorption force of yeast cells ranged within 30 - 40 pN, regardless of the interfacial amount of Con A. This force was thought to be the single binding force between a mannose group of the cell surface and an active site of Con A. Moreover, the dissociation rate constant of the single binding of yeast cell and Con A complex was determined as 4.6 x 10(-3) s(-1) and the increment of the binding distance at the transition state as 0.33 nm from the desorption kinetic experiments of yeast cell under the constant pulling conditions of 10, 20 and 30 pN. Such satisfactory results demonstrate the novel advantages of the present method.     

Approximation of transient temperatures in complex geometries using fractional derivatives

It is shown that time-dependent temperatures in a transient, conductive system can be approximately modeled by a fractional-order differential equation, the order of which depends on the Biot number. This approximation is particularly suitable for complex shapes for which a first-principles approach is too difficult or computationally time-consuming. Analytical solutions of these equations can be written in terms of the Mittag-Leffler function. The approximation is especially useful if a suitable fractional-order controller is to be designed for the system.     

Influence of the network chain orientation on the fracture toughness of a mesogenic epoxy resin modified with CTBN

A biphenol‐type epoxy resin, which had a mesogenic group in the backbone moiety, was modified with carboxy‐terminated butadiene acrylonitrile copolymer (CTBN) as a reactive elastomer, and its fracture toughness was measured. With the addition of CTBN, the fracture toughness of the biphenol‐type epoxy resin significantly increased and became significantly higher than that of a bisphenol A‐type epoxy resin modified with CTBN. The network chain orientation in the cured biphenol‐type epoxy resin system was clearly observed during the fracture process with polarized microscopy Fourier transform infrared measurements, although such a phenomenon was not observed in the bisphenol A‐type epoxy resin system. The high toughness of the cured biphenol‐type system was clearly due to the consumption of the mechanical energy by a large deformation of the matrix resin due to the orientation of the network chains during the fracture process. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1198–1209, 2003     

Reduction of dislocation density and improvement of optical quality in ZnO layers by MgO-buffer annealing

Optical properties of ZnO thin films with/without MgO-buffer annealing were investigated by low and room temperature photoluminescence measurements. The ZnO films were grown on c-sapphire substrates by plasma-assisted molecular-beam epitaxy employing a thin MgO-buffer layer. Dislocation density of ZnO layer was reduced from 5.3 × 10⁹ to 1.9 × 10⁹ cm⁻² by annealing MgO-buffer prior to the growth of ZnO. The intensity of free exciton emission from the sample with MgO-buffer annealing was almost twice of that from the sample without annealing, while the deep level emission from the sample with MgO-buffer annealing was about 1/3 of that without annealing. The MgO-buffer annealing improves optical quality of overgrown ZnO films.     

Extremal Self-Dual [50, 25, 10] Codes with Automorphisms of Order 3 and Quasi-Symmetric 2-(49, 9,6) Designs

Five non-isomorphic quasi-symmetric 2-(49, 9, 6) designs are known. They arise from extremal self-dual [50, 25, 10] codes with a certain weight enumerator. Four of them have an automorphism of order 3 fixing two points. In this paper, it is shown that there are exactly 48 inequivalent extremal self-dual [50, 25, 10] code with this weight enumerator and an automorphism of order 3 fixing two points. 44 new quasi-symmetric 2-(49, 9, 6) designs with an automorphism of order 3 are constructed from these codes.     

Anti-inflammatory effect of Zingiber cassumunar Roxb. and its active principles.

The present study was carried out to elucidate the anti-inflammatory effect of the methanol extract obtained from the rhizomes of Zingiber cassumunar Roxb. and its active principles. The methanol extract was partitioned between ether and water, and then the ether-soluble fraction was extracted with n-hexane. The n-hexane-soluble fraction was chromatographed and part of the fraction was rechromatographed by silica gel column. Three compounds were isolated from the n-hexane-soluble fraction and the chemical structures of these compounds were identified as (E)-1-(3,4-dimethoxyphenyl)but-1-ene, (E)-1-(3,4-dimethoxyphenyl)butadiene and zerumbone. The anti-inflammatory activity of these fractions was investigated on carrageenin-induced edema in rats, as well as on acetic acid-induced vascular permeability and writhing symptoms in mice. The methanol extract (p.o.) showed both anti-inflammatory activity and analgesic activity. These activities shifted successively to ether-soluble and n-hexane-soluble fractions and to (E)-1-(3,4-dimethoxyphenyl)but-1-ene. These results suggest that the anti-inflammatory action and analgesic action of Zingiber cassumunar is the result of the (E)-1-(3,4-dimethoxyphenyl)but-1-ene that it contains.     

Thermal properties and fracture toughness of a liquid‐crystalline epoxy resin cured with an aromatic diamine crosslinker having a mesogenic group

A mesogenic‐type curing agent was synthesized to introduce a mesogenic group not only into epoxy resin backbones but also into the crosslink units. In the mesogenic curing agent system, the domain size became larger, and the network arrangement in each domain existed to a greater extent than that in a system cured with the ordinary diamine curing system according to the evidence from polarized optical micrographs and polarized Fourier transform infrared mapping measurements. Moreover, the fracture toughness of the system was considerably improved. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2486–2494, 2006