Low temperature synthesis and characterization of porous anatase TiO2 nanoparticles

An ethanol solution of Ti-peroxy compounds was prepared from the ethanol solution of titanium isopropoxide (Ti(O-iPr)4) and H2O2. Heating of the ethanol solution of the Ti-peroxy compounds at 348 K formed a Ti-peroxy gel, and heat treatment of the gel at 348 K for more than 6 h formed gels that consisted of anatase nanoparticles. The diameter of the anatase nanoparticles increased from 9 to 15 nm as the heating time increased from 6 to 48 h. According to the results of the N2 adsorption measurement, the anatase nanoparticles had micropores, and the specific surface area (SBET) was in the range of 254 to 438 m2/g. The particle size, lattice strain, specific surface area, and photocatalytic activity of the anatase nanoparticles can be regulated by the heating time of the Ti-peroxy gel at 348 K.     

Reaction of carboxamide with Cu2Oisonitrile complex; formation of a new chelated copper(I) complex

Reaction of carboxamides with Cu₂O in the presence of t-butyl isocyanide gave new chelated copper(I) complexes, which probably are formed by the insertion of t-butyl isocyanide into the coppernitrogen bond of copper(I) amide isonitrile complexes, which were initially produced from the carboxamides and Cu₂Ot-butyl isocyanide complex. The same chelated copper(I) complexes were prepared more readily by the reaction of the corresponding N-trimethylsilyl-carboxamides with Cu₂Ot-butyl isocyanide complex. Reactions of the copper(I) complexes thus obtained with alkylating agents, such as alkyl halides, alkyl tosylates and triethyloxonium tetrafluoroborate, also were described.     

Domino allylation and cyclization of ortho-alkynylbenzaldehydes with allyltrimethylsilane catalyzed by Pd(II)-Cu(II) bimetallic systems

The reaction of ortho-alkynylated benzaldehydes 1 with allyltrimethylsilane under the Pd(OAc)₂-CuCl₂ catalyst system gave the isochromene derivatives 2 together with the chlorinated products 3. When the reaction was conducted in the presence of half equiv of H₂O, the formation of 3 was suppressed and 2 was obtained in good to high yields. When the reaction of 1a was carried out with trimethylsilylcyanide instead of allylsilane, the cyano group-substituted isochromene 9 was obtained in 94% yield.     

AuCl(3)-catalyzed benzannulation: synthesis of naphthyl ketone derivatives from o-alkynylbenzaldehydes with alkynes

The reaction of o-alkynylbenzaldehydes 1 and alkynes 2 in the presence of a catalytic amount of AuCl3 in (CH2Cl)2 at 80 degrees C gave naphthyl ketone products in high yields. The AuCl3-catalyzed formal [4 + 2] benzannulation proceeds most probably through the coordination of the triple bond of 1 to AuCl3, the formation of benzo[c]pyrylium auric ate complex via the nucleophilic addition of the carbonyl oxygen atom, the Diels-Alder addition of alkynes 2 to the auric ate complex, and subsequent bond rearrangement. Similarly, the AuCl3-catalyzed reactions of o-alkynylacetophenone and o-alkynylbenzophenone with phenylacetylene afforded the corresponding naphthyl ketone products in good yields.     

Synthetic study of optically active and C2-symmetric novel ligand, 7,8-bis(benzyloxy)bicyclo[2.2.2]octa-2,5-diene and a tricarbonyliron complex

The 7,8-bis(benzyloxy)bicyclo[2.2.2]octa-2,5-diene derivatives have been synthesized via Diels-Alder reaction of optically active 5,6-bis(benzyloxy)cyclohexa-1,3-diene and dienophiles. The corresponding tricarbonyliron complexes have also been synthesized in enantiomerically pure form.     

Propylene carbonate as a solvent for salting-out extraction and subsequent differential pulse polarography

Summary Selective and sensitive procedures are described for the direct differential pulse polarographic determination of antimony(III), indium(III) and cadmium(II) in propylene carbonate. This method was based on the salting-out extraction of their halide complexes into the solvent from acidic aqueous media. The extracted Sb(III), In(III) and Cd(II) complexes exhibit sharp differential pulse polarographic peaks at –0.21 V, –0.63 V and –0.72 V vs. SCE in salted-out propylene carbonate phases respectively. The lower limits of determination are 5.0g for Sb(III), 0.6g for In(III), and 0.2g for Cd(II) in 10 ml of the organic phase. A number of foreign ions are eliminated through both processes of solvent extraction and polarography using propylene carbonate.

---

Propylencarbonat als Lösungsmittel für die Fällungs-Extraktion und die nachfolgende Differential-Puls-Polarographie

Zusammenfassung Selektive und empfindliche Verfahren für die direkte Bestimmung von Sb(III), In(III) und Cd(II) in Propylencarbonat mit Hilfe der Differential-Puls-Polarographie wurden beschrieben. Die vorliegende Methode beruht auf der Fällungs-Extraktion der Halogenid-Komplexe aus wäßrig-saurem Medium in das Lösungsmittel. Die extrahierten Komplexe des Sb(III), In(III) und Cd(II) ergeben scharfe Peaks bei –0,21 V, –0,63 V und –0,72 V gegen die Kalomelelektrode in den betreffenden Propylencarbonat-Phasen. Die unteren Grenzen der Bestimmungen liegen bei 5,0g Sb, 0,6g In bzw. 0,2g Cd in 10 ml organischer Phase. Eine Anzahl Fremdionen wird durch die beiden Prozesse der Extraktion und der Polarographie in Propylencarbonat ausgeschaltet.

     

Synthesis of 3-aminopyrazolo[3,4-d]pyrimidine derivatives using N-bis(methylthio)methylene-p-toluenesulfonamide

N-Bis(methylthio)methylene-p-toluenesulfonamide ( 1 ) reacted with active methylene compounds such as malononitrile ( 2a ) and, cyanoacetamide ( 2b ) to give the corresponding 3-methylthio-3-p-toluenesulfonylami-nopropenenitrile derivatives 3a,b which were found to be convenient starting materials for the synthesis of 3,5-diaminopyrazole derivatives. Reaction of 3a and 3b with hydrazines gave the corresponding 3,5-diaminopyrazoles 4a-e , key intermediates for the synthesis of 3-aminopyrazolo[3,4-d]pyrimidine derivatives 5a-d .     

Cooperative motions of protein and hydration water molecules: molecular dynamics study of scytalone dehydratase

Two molecular dynamics (MD) simulations totaling 25 ns of simulation time of monomeric scytalone dehydratase (SD) were performed. The enzyme has a ligand-binding pocket containing a cone-shaped alpha+beta barrel, and the C-terminal region covers the binding pocket. Our simulations clarified the difference in protein dynamics and conformation between the liganded protein and the unliganded protein. The liganded protein held the ligand molecule tightly and the initial structure was maintained during the simulation. The unliganded protein, on the other hand, fluctuated dynamically and its structure changed largely from the initial structure. In the equilibrium state, the binding pocket was fully solvated by opening of the C-terminal region, and the protein dynamics was connected with hydration water molecules entry into and release from the binding pocket. In addition, the cooperative motions of the unliganded protein and the hydration water molecules produced the path through the protein interior for ligand binding.     

Polyether-bridged sexithiophene as a complexation-gated molecular wire for intramolecular photoinduced electron transfer

The porphyrin-sexithiophene-fullerene triad 2, where the two central thiophene units of the sexithiophene spacer are bridged with a crown-ether-like polyether chain, undergoes efficient intramolecular electron transfer from the photoexcited porphyrin moiety to the fullerene through the sexithiophene. However, complexation with a sodium cation in the crown ether ring causes complete suppression of electron transfer as a result of a drastic conformational change of the sexithiophene backbone. Furthermore, decomplexation resumes the photoinduced electron transfer. This on/off switching phenomenon indicates that the polyether-bridged sexithiophene can function as a complexation-gated molecular wire.