Photocyclization of 2-(naphth-1-yl)-3-(thien-2-yl)propenoic acid and the total assignment of the 1H- and 13C-NMR spectra of the product

Photocyclization of the substituted 2-(naphth-1-yl)-3-(thien-2-yl)propenoic acid ( 3 ) in the presence of iodine and air in a benzene-cyclohexane mixture afforded a separable mixture of three compounds, phenanthro[2,1-b]thiophene-10-carboxylic acid ( 4 ), phenanthro[2,1-b]thiothene ( 5 ), and naphtho[1,8-cde]-thieno[3,2-g][2]benzopyran ( 6 )     

Synthesis of phenaleno[1,9-bc]thiophene

The cyclization of 2-acetonylthionaphthalene, prepared from 2-mercaptonaphthalene (1) and chloro-acetone in the presence of sodium hydroxide, with polyphosphoric acid gave 1-methylnaphtho[2,1-b]thiophene (4) in 64% overall yield from 1. By bromination with N-bromosuccinimide, 4 was converted in 40% yield into l-bromomethylnaphtho[2,1-b]thiophene (8) . Treatment of 8 with potassium cyanide in a phase-transfer medium gave l-cyanomethylnaphtho[2,1-b]thiophene (10) in good yield. Compound 10 was reduced to the corresponding aldehyde 11 and then cyclized with polyphosphoric acid to phenaleno[l,9-bc]thiophene (12) in 24% overall yield from 10.     

OBSERVATION OF THE PICOSECOND TIME-RESOLVED SPECTRUM OF SQUID BATHORHODOPSIN AT ROOM TEMPERATURE

Difference spectra between squid rhodopsin and its bathorhodopsin at room temperature were measured ca. 150 ps and ca. 500 ps after the excitation at 347.2 nm by a double-beam picosecond time-resolved spectrometer. The spectra measured showed a red shift of the isosbestic point between squid rhodopsin and its bathorhodopsin and a lower ΔA_max/ΔA_min value compared with those measured at low temperatures by conventional spectrophotometry.     

Bis(2-bromoethyl) selenium dibromide as the selenium-introducing reagent: One-pot preparation of 2,5-bis(alkoxymethyl)tetrahydroselenophenes by the cyclization of 1,5-hexadiene

The reaction of bis(2-bromoethyl)selenium dibromide (1a) with 1,5-hexadiene (2) in methanol or ethanol affords 2,5-bis(alkoxymethyl)tetrahydroselenophene-1,1-dibromides (R = CH₃ (3b), R = C₂H₅ (3c)) via 2,5-bis(bromomethyl)tetrahydroselenophene-1,1-dibromide (3a). The reaction of 1a with 2 in 1-propanol, 2-methyl-1-propanol or 1-butanol in the presence of sodium carbonate gave 2,5-bis(alkoxymethyl)tetrahydroselenophene (R = C₃H₇ (4a), R = (CH₃)₂CHCH₂ (4b) and R = C₄H₉ (4c)) via 3a. The ratios of the trans and cis isomers of 3a–3c are 3:2. In addition, the structure of trans-2,5-bis(methoxymethyl)tetrahydroselenophene-1,1-dibromide (trans-3b) was determined by X-ray crystallography.     

Convergent synthesis of polycyclic ethers via the intramolecular allylation of alpha-acetoxy ethers and subsequent ring-closing metathesis

The Lewis acid mediated reaction of alpha-acetoxy ethers 15-22 gave the corresponding cyclized products 23, 25, 27, 29, 31, 32, 34, and 36 in good yields with high stereoselectivities. Those cyclized products were subjected to ring-closing metathesis to afford the polycyclic ethers 38-42, 44, and 45 in good yields. The usefulness of the present methodology was demonstrated by the convergent synthesis of the CDEF ring system of brevetoxin B (1) and the CDEFG ring system of gambierol (2).     

Synthesis of pyrimidine derivatives by the reaction of ketene dithioacetals with amides

Reactions of methyl 2-cyano-3,3-bis(methylthio)acrylate ( 1a ) with carboxamides 2a-g in the presence of sodium hydride in a mixture of benzene and N,N-dimethylacetamide took place displacement with the methylthio group to give the corresponding methyl 3-N-acylamino-2-cyano-3-(methylthio)acrylates 3a-g which were readily converted to the corresponding pyrimidine derivatives at reflux in methanol in good yields. Reactions of 2-cyano-3,3-bis(methylthio)acrylonitrile ( 1b ) with the carboxamides 2a-f gave directly pyrimidine-5-carbonitrile derivatives 7a-f . Ketene dithioacetals 1a,b smoothly reacted with thioamide 2g or urea 2h,i to give the expected pyrimidine derivatives 9,10a,b . Polyfunctionalized pyrimidines, thus obtained, were also used for the synthesis of fused pyrimidine derivatives.     

Lewis Acid-Catalyzed Hydrostannation of Acetylenes. Regio- and Stereoselective Trans-Addition of Tributyltin Hydride and Dibutyltin Dihydride

Lewis acids such as ZrCl(4) or HfCl(4) catalyze the hydrostannation of acetylenes 1 by tributyltin hydride to produce the cis vinylstannanes 2 by regio- and stereoselective anti-hydrostannation. The hydrostannation of acetylenes using dibutyltin dihydride was also catalyzed by ZrCl(4) to give the stereodefined Z-Z divinyltin derivatives 4 by an anti-hydrostannation pathway. The use of nonpolar solvents such as toluene or hexane was essential for obtaining high stereoselectivity and chemical yield. Since ZrCl(4) and HfCl(4) are not soluble in such solvents, the hydrostannations were carried out in a heterogeneous system. The reactions of internal acetylenes with Bu(3)SnH proceeded smoothly, although the use of stoichiometric amounts of ZrCl(4) gave better results. The ZrCl(4)-catalyzed hydrostannation at 0 degrees C gave better yields and stereoselectivities than the reaction at room temperature. To help clalify the reason, the reaction of Bu(3)SnH with ZrCl(4) was monitored by (1)H and (119)Sn NMR spectroscopy, and it was found that Bu(3)SnH reacted with ZrCl(4) at room temperature to afford a mixture of tributyltin hydride, dibutyltin dihydride, and tetrabutyltin.     

NMR Spectroscopic Observation of a Metal‐Free Acetylide Anion

A metal‐free acetylide was observed by using NMR spectroscopy. Metal‐free acetylides are closely related to reactive intermediates (carbanions) in solution; therefore, they have been regarded as unobservable species. However, we generated this highly reactive and unstable species through the deprotonation of phenylacetylene by using the strong nonmetallic phosphazene base tBu‐P4. In the presence of tBu‐P4, the J coupling between the ethynyl carbon and hydrogen nuclei (¹J_C,H) of phenylacetylene disappeared; this indicates the deprotonation of the alkyne terminal. Furthermore, a large low‐field shift (approximately 90 ppm) of the alkyne carbon resonance was observed. We concluded that we have observed a metal‐free carbanion with a formal charge on an sp‐hybridized carbon atom for the first time.     

Epsilon -N,N,N-trimethyllysine-specific ions in matrix-assisted laser desorption/ionization-tandem mass spectrometry

Epsilon -N,N,N-trimethyllysine (K(me3)) is a component of a number of proteins and plays an important role in the expression of their biological functions. Trimethylation, which causes an incremental increase in mass of 42.0470 Da from that of the corresponding MH(+) ion, cannot be distinguished from the acetylation (+42.0106 Da), which also occurs on epsilon-amino groups of Lys or alpha-amino groups in many proteins, without high-accuracy mass measurement which is accurate to within the second decimal place. MALDI-MS and MS/MS have been applied for the analyses of post-translational modifications of histone H3, which is known to contain both multiple acetylation and methylation sites in its sequence. During the measurements of the modified peptides, a novel fragmentation which involves the loss of trimethylamine from K(me3) was found. This characteristic fragmentation, which was observed to produce ions separated by 59 Da from the conventional precursor ion or sequence ions, would be useful for probing K(me3) units in the sequence.     

A proposal on the steric course of propagation in the homogeneous cationic polymerization of vinyl and related monomers

A stereochemical scheme of propagation was proposed for polymerizations of vinyl and related monomers by Friedel-Crafts catalysts. For the cationic propagation proceeding via the simple carbonium ion pair, the following two factors were considered to be of primary importance in determining the steric course of propagation: (1) the conformation of the last two units of the propagating polymer segment and the direction of approach of the incoming monomer; (2) the tightness of the growing ion pair. Thus, the front-side (less hindered site) attack to the carbonium ion gives rise to a syndiotactic placement and the back-side attack an isotactic placement. The present model can satisfactorily explain the effects of substituents, catalysts, polymerization media, and polymerization temperature on the steric structure of polymers in cationic polymerization of vinyl ethers. Extension of the scheme to polymerization of the β-substituted vinyl ethers in nonpolar solvents predicts formation of the diisotactic structures consistent with the experimental result. The influences of the polymerization condition on the steric structure of polymer were studied for cationic polymerizations of α-methylstyrene at low temperatures. Highly syndiotactic polymers were obtained for homogeneous reactions in toluene-rich media. The isotactic unit increased by increasing the content of methylcyclohexane in the solvent mixture. The effect of catalysts, though insignificant in toluene-rich media, was clearly noted in methylcyclohexane-rich media, less active catalysts (e.g., SnCl₄) yielding higher amounts of the isotactic unit than more active catalysts (e.g., AlCl₃). These results can be readily accommodated in the present model.