Chemical shifts in methylcyclohexane

In order to determine the effect of a single methyl group on the chemical shifts of protons in a cyclohexane ring, methylcyclohexane-1,2,3,3,5,5,-d₆ has been synthesized. The protons in the 4-position and the 2,6-equatorial protons are not significantly different from those in ring-frozen cyclohexane. The 2,6-axial protons, however, experience an up-field shift of about 15 Hz from the position of the other axial protons. These observations are discussed in terms of the structure of methylcyclohexane.     

Treatment of ion exchange membranes to decrease divalent ion permeability

In the electrodialysis process for concentrating sea water, the addition of a small amount of the polycationic reagent Nonisold into the sea water feed results in a reduction of divalent cation permeability relative to that of monovalent cations. This is due to the formation of a reagent layer on the surface of the cation-exchange membrane. Divalent cations require greater energy to pass over the potential barrier at the reagent layer than do monovalent cations. The relationship between the height of the potential barrier and the ratio of ionic fluxes or the permselectivity coefficient is deduced on the basis of a kinetic-controlled mechanism of uptake of ions from the solution, and the height of the potential barrier is estimated from the experimental results. The difference between the potential barrier for divalent cations and that for monovalent cations may reach up to about 10 kJ/mol.     

Scale-up of wet kneading in a novel vertical high shear kneader

A novel multi-functional vertical high shear kneader has been developed and its performance in wet kneading has previously been reported [Watano et al., Chem. Pharm. Bull., 50(3), 341-345 (2002)]. In this study, scale-up of wet kneading in the novel vertical high shear kneader was conducted. Pharmaceutical excipients composed of lactose, cornstarch and micro-crystalline cellulose were used as powder samples. Kneading operations were conducted under various operating conditions and three different vessel scales. The dried pellets were then prepared by extruding the wet kneaded masses through a dome-type extruder and their drying by a fluidized bed. The physical properties such as strength and disintegration time of the dried pellets were evaluated. It was found that the properties of the dried pellets and their scale-up characteristics were well expressed by an agitation power per unit vessel volume and dimensionless Froude number.     

Solvent effect on the photochemical properties of symmetrically substituted trans-3,3',5,5'-tetramethoxystilbene

Photochemical properties of trans-3,3',5,5'-tetramethoxystilbene (TMST) have been studied in various polar solvents. The Stokes shift of trans-TMST was found to be increased with increasing solvent polarity. The fluorescence lifetime of trans-TMST experienced a large solvent effect changing from 2.3 ns in cyclohexane to 16.6 ns in acetonitrile. These results indicate that the excited singlet state of trans-TMST has a charge-transfer (CT) character. On the basis of the obtained results, the interior polar environment of a water-soluble TMST dendrimer is discussed.     

Practical and convenient synthesis of N-heterocycles: stereoselective cyclization of N-alkenylamides with t-BuOI under neutral conditions

[Structure: see text] tert-Butyl hypoiodite (t-BuOI) was found to be a powerful reagent for the cyclization of N-alkenylamides leading to a variety of N-heterocycles under extremely mild conditions. When N-alkenylsulfonamides were employed in the reaction, three- to six-membered saturated N-heterocycles were obtained in good to excellent yields with complete stereoselectivity. The method was applicable to the cyclization of alkenylbenzamide derivatives to afford N-, O- or N-, S-heterocycles.     

Current-driven resonant excitation of magnetic vortices

A magnetic vortex core in a ferromagnetic circular nanodot has a resonance frequency originating from the confinement of the vortex core. By the micromagnetic simulation including the spin-transfer torque, we show that the vortex core can be resonantly excited by an ac (spin-polarized) current through the dot and that the resonance frequency can be tuned by the dot shape. The resistance measurement under the ac current successfully detects the resonance at the frequency consistent with the simulation.     

Electron beam epitaxy of alloy semiconductors

Abstract

It was investigated that, when an Al evaporated layer on a GaP (GaAs, GaAs_1?y P _y ) substrate was bombarded with total fluences of 0.1?1.0 × 10¹⁸ electrons cm^?2 at 7 MeV and at 50°C, a thin heteroepitaxial layer of Al _x Ga_1?x P (Al _x Ga_1?x As, Al _x Ga_1?x As_1?y P _y ) crystal was grown on S-doped (111), (100) and (110) GaP [(110) Cr, O-doped GaAs, (100) Te-doped GaAS_1?y P _y ] substrates.

Evidence for the creation of the epilayers before annealing was obtained from measurements using an X-ray diffractometer, an X-ray photoelectron spectrometer, a reflection high-energy electron diffractometer, a transmission electron microscope and a scanning transmission electron microscope. In the case of Al/GaP, the epitaxial layers of Al_～0.25Ga_～0.75P, Al_～0.5Ga_～0.5P and Al_～0.75Ga_～0.25P were grown on (111), (100) and (110) GaP substrates, respectively. Their compositions did not vary with the total electron fluence.     

Facile Fabrication of Concentrated Polymer Brushes with Complex Patterning by Photocontrolled Organocatalyzed Living Radical Polymerization

Photocontrolled surface‐initiated reversible complexation mediated polymerization (photo‐SI‐RCMP) was successfully applied to fabricate concentrated polymer brushes with complex patterning structures. Positive‐type patterned polymer brushes were obtained by photo‐SI‐RCMP under visible light (550(±50) nm) using photomasks. A particularly interesting finding was that negative‐type patterned polymer brushes were also obtainable in a facile manner. A nonspecial UV light (250–385 nm) enabled the preparation of pre‐patterned initiator surfaces in a remarkably short time (1 min), leading to negative‐type patterned polymer brushes. Based on this unique selectivity between visible and UV light, the combination of two patterning techniques enabled the preparation of complex patterned brushes, including diblock copolymers, binary polymers, and functional binary polymers, without multistep immobilization of one or more initiators on the surfaces.     

Nonlinear viscoelastic properties and change in entanglement structure of linear polymer

Simultaneous measurements of stress relaxation and differential dynamic modulus were made at 268 K over a time scale of 10 to 10⁴⁵ s for nearly monodisperse polybutadiene (M _w =2.2x10⁵, 1,2-structure 70%, M _e =3600) and also one having coarse cross-linking (M _c =29000). Static shear strain ranged from 0.1 to 2.0. In a long-time region (t> _k ), the relaxation modulus G (; t) could be expressed by the product G (0; t) h (y). The observed h() agreed well with the Doi-Edwards theory without use of IA approximation. Both the cured and uncured samples showed initial drop of the differential storage modulus G (), ; t) followed by gradual recovery, but did not attain the value before shearing G (, ; t) for the uncured sample showed smaller values than that for the cured one in the whole measured time scale at the higher strain, confirming the two origins of nonlinear viscoelasticity of well entangled polymer; induced chain anisotropy and induced decrement in entanglement density. G (, ; t) curves for the cured sample agreed well with the BKZ predictions. But the curves for the uncured sample agreed well with the BKZ prediction only at the time scale of t< _k . BKZ prediction showed significant upward deviations at t> _k . Such the differences are discussed in terms of the two origins.Dedicated to Prof. John D. Ferry on the occasion of his 85th birthday.