Granulation of core particles suitable for film coating by agitation fluidized bed II. A proposal of a rapid dissolution test for evaluation of bitter taste of ibuprofen

To prepare powdered drugs that do not have a bitter taste, a film coating covering the surfaces of the core particles is required. The dissolution rate of ibuprofen from the coated particles changes according to the physical properties of the core particles. In this study, the effects of the physical properties of granules prepared by using several scales of agitation fluidized beds on the drug dissolution rate were investigated. The dissolution rate of ibuprofen decreased when the apparent density and shape factor of the granules increased. In contrast, the dissolution rate of the drug increased with the friablility of the granules increased. Thus, the structures of the granules appear to affect the dissolution rate of the drug to a large degree. A rapid dissolution test that can be used to investigate the early dissolution rate of ibuprofen in vitro was proposed to evaluate the taste-masking level of the coated particles. The bitter taste-masking level of the coated particles was successfully confirmed by using this novel test method.     

Coverage-dependent sticking probability and desorption kinetics of water molecules on Rh(111)

The adsorption and desorption kinetics of water molecules on Rh(111) were investigated using temperature programed desorption (TPD). Water molecules on Rh(111) show coverage-dependent sticking probability; the initial sticking probability is estimated to be 0.46. In the desorption process, a dilute gaslike phase and two-dimensional islands of water coexist on the surface. Based on the model proposed by Kreuzer and Payne [Surf. Sci.200, L433 (1988)], the apparent fractional-order TPD spectra can be interpreted as first-order desorption from the coexistence of two phases on which the sticking probabilities are different. Based on this, the previous estimation of pre-exponential factors assuming half-order desorption [A. Beniya et al., J. Chem. Phys.125, 054717 (2006)] should be revised.     

Lattice Boltzmann simulations for proton transport in 2-D model channels of Nafion

Proton conductance in a 2-D channel with a slab-like structure was studied to verify that the lattice Boltzmann method (LBM) can be used as a simulation tool for proton conduction in a Nafion membrane, which is a mesoscopic system with a highly disordered porous structure. Diffusion resulting from a concentration gradient and migration by an electrostatic force were considered as the origins of proton transport. The electrostatic force acting on a proton was computed by solving the Poisson equation. The proton concentration in the membrane is expressed as a continuous function and the sulfonic charge is placed discretely. The space-averaged conductance of protons in a nonequilibrium stationary state was evaluated as a function of the structural parameters: namely, channel width and distribution of the sulfonic groups. The resulting space-averaged conductance deviates from the bulk values, depending particularly on the sulfonic group distribution. Details of the simulation scheme are described and the applicability of the present scheme to real membranes is discussed.     

Carbocupration of 1-alkynylphosphines followed by trapping with electrophiles

Treatment of 1-alkynylphosphine with magnesium dialkylcuprate in ether results in regio- and stereoselective syn-carbocupration. The alkenylcopper intermediate reacts with electrophile, which leads to allylation, acylation, and phosphination. The phosphination offers a new route to gem-diphosphinoalkene, an interesting phosphorus-based organic structure.     

Single-molecule measurements with a single quantum dot

Recent progress of quantum dot (QD) applications in single-molecule measurements are reviewed in this paper. Bright fluorescence and anti-photobleaching properties of QDs have explored the way to conduct long-time trajectory tracking of transmembrane proteins both in vitro and in vivo. Coupled with diversities of chemical and biochemical modifications of QD surfaces, their application fields are expanding to multidiscipline fields including imaging on the basis of a single molecule. Currently, molecular interactions and conformational changes on the QD surface can be detected at a single-molecule level. These expansions of application fields also involve toxicity problems in cells since most commercially available QDs consist of cadmium selenide or cadmium telluride, which are inherently toxic. For widespread applications of QDs including in vivo and therapeutic use in place of current organic fluorophore, cytotoxicity is discussed as well in this paper. 10.1002/tcr.20128.     

Analysis of swelling process of protein by positron annihilation lifetime spectroscopy and differential scanning calorimetry

The change in the nanoscopic structure and bound state of water in the protein gel were investigated using positron annihilation lifetime spectroscopy (PALS) and differential scanning calorimetry (DSC). Gelatin was used as a protein. To examine the bound state of water in gelatin gel, the amount of freezing and nonfreezing water in gelatin gels were evaluated by fusion enthalpy of DSC curves. Below water content of 40% (w/w), the whole amount of water was nonfreezing water, whereas above water content of 40% (w/w), the amount of freezing water increased according to increase in water content. To investigate the nanoscopic spatial structure under coexistence of polymer and water, positron annihilation lifetime measurement was performed. The lifetime of o‐Ps or the pore size increased according to increase in water content, particularly below the water content of 40% (w/w). When the water penetrates into the gelatin network, the water molecules form hydrogen bonds with hydrophilic groups inside the helical structure in gelatin gel. The water molecules inside the helical structure expand the structure outward, leading to increase in pore size. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2031–2037, 2007.     

Size-tunable silicon/iron oxide hybrid nanoparticles with fluorescence, superparamagnetism, and biocompatibility

Magnetic/fluorescent composite materials have become one of the most important tools in the imaging modality in vivo using magnetic resonance imaging (MRI) monitoring and fluorescence optical imaging. We report herein on a simplified procedure to synthesize hybrid nanoparticles (HNPs) that combine silicon and magnetic iron oxides consisting of magnetite (Fe(3)O(4)) and maghemite (γ-Fe(2)O(3)). Intriguingly, our unique synthetic approach can control magnetic and optical behaviors by reducing the particle size, demonstrating that the HNPs with the mean diameter of 3.0 nm exhibit superparamagnetic behavior and green fluorescence in an aqueous solution, ambient air, and a cellular environment, whereas the HNPs with the mean diameter more than 5.0 nm indicate ferromagnetic behavior without fluorescence. Additionally, both HNPs with different diameters possess excellent magnetic responsivity for external applied magnetic field and good biocompatibility due to the low cytotoxicity. Our biocompatible HNPs with the superparamagnetism can provide an attractive approach for diagnostic imaging system in vivo.     

Two-dimensional superstructures and softened C-H stretching vibrations of cyclohexane on Rh(111): effects of preadsorbed hydrogen

Adsorption structures and interaction of cyclohexane molecules on the clean and hydrogen-preadsorbed Rh(111) surfaces were investigated using scanning tunneling microscopy, spot-profile-analysis low-energy electron diffraction, temperature-programmed desorption, and infrared reflection absorption spectroscopy (IRAS). Various ordered structures of adsorbed cyclohexane were observed as a function of hydrogen and cyclohexane coverages. When the fractional coverage (θ(H)) of preadsorbed hydrogen was below 0.8, four different commensurate or higher-order commensurate superstructures were found as a function of θ(H); whereas more densely packed incommensurate overlayers became dominant at higher θ(H). IRAS measurements showed sharp softened C-H vibrational peaks at 20 K, which originate from the electronic interaction between adsorbed cyclohexane and the Rh surface. The multiple softened C-H stretching peaks in each phase are due to the variation in the adsorption distance from the substrate. At high hydrogen coverages they became attenuated in intensity and eventually diminished at θ(H) = 1. The gradual disappearance of the soft mode correlates well with the structural phase transition from commensurate structures to incommensurate structures with increasing hydrogen coverage. The superstructure of adsorbed cyclohexane is controlled by the delicate balance between adsorbate-adsorbate and adsorbate-substrate interactions which are affected by preadsorbed hydrogen.