Anisotropic friction model of DNA electrophoresis in polymer solutions: Comparison with direct observations

The electrophoresis of DNA chains in uncrosslinked polymer solutions with a Brownian dynamics simulation with an anisotropic friction tensor was analyzed. According to the degree of anisotropy, three types of migration behavior are obtained: fluctuation without or with periodicity between U‐shaped and compact conformations, or migration with linear conformation. We found good agreement between our simulation results and the direct observations of DNA by fluorescence microscopy. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1316–1322, 2003     

220-MHz NMR spectra of acrylic monomer–2-substituted 1,3-diolefin alternating copolymers

An investigation by 220-MHz NMR spectroscopy was carried out on the alternating copolymers of acrylic monomer with 2-substituted 1,3-diolefin. The chain structures were determined. The acrylic monomers used were methyl methacrylate (MMA), acrylonitrile (AN), and methacrylonitrile (MAN); isoprene (IP) and chloroprene (CLP) were the 1,3-diolefins. In the MAN–IP alternating copolymer, the 1-position methylene protons of IP showed an AB quartet peak, confirming the α-1 linkage structure. Similarly, in the MMA–CLP and AN–CLP copolymers, the 1-position methylene protons of CLP showed and AB quartet and an ABX pattern, respectively, confirming the α-1 linkage structure in both these cases also. The α-1 linkage structure was also revealed by the decoupling technique in the MAN–CLP alternating copolymer. The AN–IP and MMA–IP alternating copolymers also possess a bond between the α-position of the acrylic monomer and the 1-position of IP. The monomeric units in the alternating copolymers of acrylic monomers with 2-substituted 1,3-diolefins were generally linked at the α-position of acrylic monomer and the 1-position of 1,3-diolefin. On the other hand, in the Diels-Alder adducts of acrylic monomer with 2-substituted 1,3-diolefin, the reaction takes place between the α-position of acrylic monomer and the 4-position of 1,3-diolefin. The regioselectivity of the alternating copolymers and the Diels-Alder adducts is quite compatible with the expectations from molecular orbital theory.     

The Weight-Bearing Rate on the Paretic Limb of Cerebrovascular Hemiplegic Patients Necessary for an Independent Obstacle Negotiation Gait

Purpose: The obstacle negotiation gait (ONG) is a fundamental activity of daily living. In cerebrovascular hemiplegic patients (stroke patients), the weight-bearing rate (WBR) on the paretic limb necessary for an independent ONG was studied. Methods: One hundred and seventeen stroke patients were involved. The patients'' average age at the time of the study was 67 years, and the average time from stroke onset was 102 days. There were 68 men and 49 women. Seventy patients were right hemiplegics, and 47 were left hemiplegics. The correlations between ONG and age, sex, body mass index (BMI), time from stroke onset, muscle strength of both the paretic and non-paretic limbs, Brunnstrom stage of the lower limbs, deep sensation, and the WBR on both the paretic and non-paretic limbs were studied. Patients who could perform ONG independently and safely were categorized as the independent group (IG), and those who needed observation or any assistance were categorized as the dependent group (DG). Results: The BMI, muscle strength of both the paretic and non-paretic limbs, Brunnstrom stage of the lower limbs, deep sensation and the WBR for both the paretic and non-paretic limbs were significantly different between the IG and DG groups. In particular, the WBR on the paretic limb was found to correlate significantly with the ONG, and a WBR value of 80.5% on the paretic limb gave a clear cut-off value. Conclusion: Although multiple factors influenced the ONG of stroke patients, the WBR on the paretic limb was the most influential.     

Electrochemical reactors for NO decomposition. Basic aspects and a future

The electrochemical reduction of nitric oxide in the presence of the excess oxygen was reviewed. It was shown that the selectivity and activity of the cathodes is strongly dependent on the composition and on the microstructure of the cathode material. A concept of electrochemical reactor with multilayer electro-catalytic electrode was proposed and successfully designed in Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan. The typical values of current efficiency in such electrochemical reactors are of the order of 10–20% at gas composition: 1,000 ppm NO and 2% O₂ balanced in He and at gas flow rate 50 ml/min. The value of current efficiency depends on the functional multi-layer electrode composition, structure, and operating temperature. Such electrochemical reactors show the value of NO/O₂ selectivity (ν _sel) higher than 5 (ν _sel > 5) at intermediate temperature and up to ν _sel = 25 at low temperature operation. It was shown that multilayer electro-catalytic electrode should consist at list from three main functional layers: cathode, electro-catalytic electrode, covering layer, in order to operate as an electrode with high selectivity.     

Core-level photoemission of the Si(1 1 1)– -Ag surface using synchrotron radiation

The evolution of Si 2p core-level photoemission during a structural conversion from the Si (1 1 1)– -Ag to the Si(1 1 1)– -Ag superstructures induced by Ag adatoms adsorption at 140 K was studied using synchrotron radiation. The component from the top-layer Si-trimer atoms on the former surface was found to split into two components in the latter surface. The result is discussed in terms of a relaxation in some of the Si trimers induced by Ag adatoms sitting on the nearby Ag triangles of the -Ag substrate. The intensity ratio between the split components is a key to exclude some structure models proposed so far for the phases.     

Optical probing of spin polarization of electrons in quantum dot edge channels

We propose an optical method for the investigation of the quantum dot edge channels by utilizing circularly polarized photoluminescence in the integer-quantum-Hall-effect regime. One of the advantages of our method is that the degree of the spin-polarization of the electrons in the inner- and outer-compressible liquids can be probed separately. The observed polarized photoluminescence spectra can be explained by the calculated electron spin-dependent optical transition probabilities based on the local-spin density approximation.     

Standard pseudo-Hermitian structure on manifolds and seifert fibration

A strictly pseudoconvex pseudo-Hermitian manifoldM admits a canonical Lorentz metric as well as a canonical Riemannian metric. Using these metrics, we can define a curvaturelike function onM. AsM supports a contact form, there exists a characteristic vector field dual to the contact structure. If induces a local one-parameter group ofCR transformations, then a strictly pseudoconvex pseudo-Hermitian manifoldM is said to be a standard pseudo-Hermitian manifold. We study topological and geometric properties of standard pseudo-Hermitian manifolds of positive curvature or of nonpositive curvature . By the definition, standard pseudo-Hermitian manifolds are calledK-contact manifolds by Sasaki. In particular, standard pseudo-Hermitian manifolds of constant curvature turn out to be Sasakian space forms. It is well known that a conformally flat manifold contains a class of Riemannian manifolds of constant curvature. A sphericalCR manifold is aCR manifold whose Chern-Moser curvature form vanishes (equivalently, Weyl pseudo-conformal curvature tensor vanishes). In contrast, it is emphasized that a sphericalCR manifold contains a class of standard pseudo-Hermitian manifolds of constant curvature (i.e., Sasakian space forms). We shall classify those compact Sasakian space forms. When 0, standard pseudo-Hermitian closed aspherical manifolds are shown to be Seifert fiber spaces. We consider a deformation of standard pseudo-Hermitian structure preserving a sphericalCR structure.Dedicated to Professor Sasao Seiya for his sixtieth birthday     

Bistable Optical Devices Using Laser Diodes Coupled to Interference Filters

A bistable optical device was demonstrated by using the longitudinal mode hopping of the laser diode and the narrow transmission spectrum of an interference filter. The device is capable of converting changes in the wavelength of the laser diode into changes in intensity by transmitting it through the filter. Exclusive OR operation was observed with the use of triple signal outputs. In addition, an optical switch-off phenomenon was confirmed by directly injecting a pulse 500 ps wide into an external dye laser.     

Indirect bounds on heavy scalar masses of the two-Higgs-doublet model in light of recent Higgs boson searches

We study an upper bound on masses of additional scalar bosons from the electroweak precision data and theoretical constraints such as perturbative unitarity and vacuum stability in the two-Higgs-doublet model taking account of recent Higgs boson search results. If the mass of the Standard-Model-like Higgs boson is rather heavy and is outside the allowed region by the electroweak precision data, such a discrepancy should be compensated by contributions from the additional scalar bosons. We show the upper bound on masses of the additional scalar bosons to be about 2 (1) TeV for the mass of the Standard-Model-like Higgs boson to be 240 (500) GeV.