Synthesis and Photocatalytic Property of Hectorite/(Pt,TiO2) and H4Nb6O17/(Pt,TiO2) Nanocomposites

Abstract

TiO₂ and Pt have been intercalated in hectorite and H₄Nb₆O₁₇. The height of TiO₂ and Pt pillars was less than 0.8 nm and the band gap energy of TiO₂ pillars was ca. 3.3 eV. Both hectorite/TiO₂ and H₄Nb₆O₁₇(Pt, TiO₂) were capable of hydrogen evolution following irradiation from a high pressure mercury are (λ > 290 nm) in the presence of methanol as a sacrificial hole acceptor and the hydrogen evolution was enhanced by co-incorporation of Pt, although hectorite and hectorite/Pt did not show photocatalytic activity. Incorporation of Pt or Pt and TiO₂ in the interlayer of H₄Nb₆O₁₇ has resulted in enhanced photo evolution of hydrogen, however, TiO₂ alone in the interlayer of H₄Nb₆O₁₇ showed adverse photocatalytic activity.     

High-power 2.8 W blue-violet laser diode for white light sources

High-power 2.8 W blue-violet InGaN LD was fabricated, applying AlN facet coating technology. The AlN was found to be crystallized on the facets and very stable even after 2200 h cw operation. Luminous flux over 380 lm is obtained with a phosphor-converted LD excitation white light source using just a single laser chip at 1A operating current.     

Star-Shaped Ruthenium Complexes as Prototypes of Molecular Gears

The design and synthesis of two families of molecular-gear prototypes is reported, with the aim of assembling them into trains of gears on a surface and ultimately achieving controlled intermolecular gearing motion. These piano-stool ruthenium complexes incorporate a hydrotris(indazolyl)borate moiety as tripodal rotation axle and a pentaarylcyclopentadienyl ligand as star-shaped cogwheel, equipped with five teeth ranging from pseudo-1D aryl groups to large planar 2D paddles. A divergent synthetic approach was followed, starting from a pentakis(p-bromophenyl)cyclopentadienyl ruthenium(II) complex as key precursor or from its iodinated counterpart, obtained by copper-catalyzed aromatic Br/I exchange. Subsequent fivefold cross-coupling reactions with various partners allowed high structural diversity to be reached and yielded molecular-gear prototypes with aryl-, carbazole-, BODIPY- and porphyrin-derived teeth of increasing size and length.     

Interaction between the end groups and the main chain of conjugated polymers by time-resolved EPR and fluorescence spectroscopy

ABSTRACT

Interaction between a zinc porphyrin (ZnPor) as the end-group and poly(9,9-di-n-octylfluorene-2,7-vinylene) (PFV) as the main chain in a porphyrin end-modified fluorescent conjugated polymer, ZnPFV, was studied by time-resolved electron paramagnetic resonance (EPR) and fluorescence spectroscopy. While fluorescence from the PFV part of ZnPFV showed a spectral profile almost identical to that of a PFV oligomer without end-modification, the emission spectrum of the ZnPor part exhibited a much broader profile compared to that of the reference zinc porphyrin monomer. Based on the analysis of lifetimes and quantum yields, it was found that radiative rate constant of the ZnPor part was enhanced by nearly three times. The observed unusual enhancement in the radiative rate constant was rationalised in terms of a partial π-conjugation between the end group and the main chain, as a result of co-planarisation in fluid solution. On the other hand, the time-resolved EPR spectrum of ZnPFV at 100?K basically showed a similar spectral pattern to that of the reference zinc porphyrin, but with significant differences in zero-field spitting parameters and initial population ratios. The π-system of the excited triplet state is deduced to deviate from D_4h symmetry in the end zinc porphyrin groups. The obtained results show that interaction of the porphyrin end group with the main chain of the polymer significantly influences the excited singlet state properties of the porphyrin, while its triplet state properties were affected to a lesser extent.     

Formation of polyketone particle structure by hexafluoroisopropanol solvent evaporation and effects of plasticizer addition

Few solvents are capable of dissolving polyketones (PKs). 1,1,1,3,3,3‐Hexafluoro‐2‐propanol (hexafluoroisopropanol, HFIP) is a better solvent than trifluoroethanol and m‐cresol. When HFIP was evaporated from a PK/HFIP solution, a porous cast‐film with a microparticle structure was formed because the isotactic PKs adopted a helical conformation, and convection during evaporation of the high polarity and low‐boiling‐point HFIP caused aggregation and rolling of the polymer molecules. The addition of plasticizer suppressed particle formation, improving the surface structure and mechanical properties of the film. In particular, the dielectric properties of the film improved significantly. This will enable PKs, which are rigid insulating materials, to be used as dielectric materials, broadening their range of applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 887–892     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

Tentative Comparison of Tube Radial Distribution Chromatography and CZE

Tube radical distribution chromatography (TRDC) uses an untreated open tubular capillary tube and a ternary mixture of solvents (water and hydrophilic/hydrophobic organic solvents) as a carrier solution. A model analyte mixture comprising 1-naphthol, 1-naphthoic acid, 1-naphthalenesulfonic acid, 2,6-naphthalenedisulfonic acid, and 1,3,6-naphthalenetrisulfonic acid was examined by the TRDC and capillary zone electrophoresis (CZE) systems that comprised mainly a capillary tube and a detector. In the TRDC system the elution order of analytes could be changed by altering the component ratios of the solvents, whereas in the CZE system the elution order was changed by altering the electroosmotic flow direction. The experimental data obtained provide clues about the features and utility of TRDC as a new separation method.