Emission efficiency for particulate forms of iron and aluminum in rain-water measured by inductively-coupled plasma atomic emission spectrometry

The bulk emission efficiency for particulate forms of iron and aluminum in rain-water was evaluated. The efficiencies for iron and aluminum were >80% for particles 0.4–1 μm in diameter and about 17% for particles >8 μm; relative standard deviations were <20%. A procedure is described by which the concentrations of particulate forms of iron and aluminum in rain-water are determined. Fluctuation of particles in rain-water during a rainfall event can be monitored in detail.     

Field-assisted reaction of the metal-molten glass interface

The anodic oxidation and cathodic behavior of Pt have been investigated by linear potential sweep voltammetry in various molten glasses such as silicate, borate and mixed network-forming oxide systems. Furthermore, the metal-molten glass interface after polarization was analyzed by EPMA.     

Orthogonal trap time-of-flight mass spectrometer using a collisional damping chamber

We report a new hybrid mass spectrometer, which is a combination of a quadrupole ion trap and an orthogonal time-of-flight (TOF) mass spectrometer. This new configuration consists of a collisional-damping chamber (CDC) inserted between an MSn-capable ion trap and a high-mass-accuracy orthogonal-TOF mass spectrometer. Because the CDC converted an ion packet into an energy-focused and quasi-continuous beam, a high mass resolution of over 10,000 and a high mass accuracy of better than 3 ppm were achieved. Moreover, the ratio of the maximum detectable m/z to the minimum detectable m/z, which is referred to here as the mass window, was improved to more than 10.     

Concise asymmetric total synthesis of scyphostatin, a potent inhibitor of neutral sphingomyelinase

The concise asymmetric total synthesis of scyphostatin has been achieved by condensation of the optically active cyclohexane unit, prepared from the commercially available 1,4-cyclohexadiene by our own method, and the side chain, prepared by the method developed by Hoye and Tennakoon (T. R. Hoye, M. A. Tennakoon, Org. Lett. 2000, 2, 1481-1483). The modification of the epoxy cyclohexenone unit was achieved in a late stage of the total synthesis, and deprotection of the primary alcohol was conducted in the final step. During the synthesis several key reactions were attained: 1) intramolecular bromoetherification of the cyclohexadiene acetal; 2) stereoselective introduction of the tertiary alcohol, 3) deprotection of the acetal function to the aldehyde by combination with silyl triflate/2,4,6-collidine and the one-pot synthesis of the disilyl aldehyde compounds, with different types of silyl groups, from the dihydroxy acetal compounds; and 4) facile deprotection of the 2,4-dimethoxyphenylmethyl ((2,4)DMPM) protecting group of the primary alcohol.     

Protic N‐Heterocyclic Carbene Versus Pyrazole: Rigorous Comparison of Proton‐ and Electron‐Donating Abilities in a Pincer‐Type Framework

Evaluation of the acidity of proton‐responsive ligands such as protic N‐heterocyclic carbenes (NHCs) bearing an NH‐wingtip provides a key to understanding the metal–ligand cooperation in enzymatic and artificial catalysis. Here, we design a CNN pincer‐type ruthenium complex 2 bearing protic NHC and isoelectronic pyrazole units in a symmetrical skeleton, to compare their acidities and electron‐donating abilities. The synthesis is achieved by direct C?H metalation of 2‐(imidazol‐1‐yl)‐6‐(pyrazol‐3‐yl)pyridine with [RuCl₂(PPh₃)₃]. ¹⁵N‐Labeling experiments confirm that deprotonation of 2 occurs first at the pyrazole side, indicating clearly that the protic pyrazole is more acidic than the NHC group. The electrochemical measurements as well as derivatization to carbonyl complexes demonstrate that the protic NHC is more electron‐donating than pyrazole in both protonated and deprotonated forms.     

Tricritical point induced by smectic ordering of a nematic gel

The authors study volume phase transitions of a nematic gel immersed in a liquid crystal (LC) solvent, which shows a second-order nematic-smectic A phase transition (NST). Combining Flory's elastic energy [Principles of Polymer Chemistry (Cornell University Press, Ithaca, 1953)] for a swelling of the gel with the McMillan model [Phys. Rev. A 4, 1238 (1971)] for smectic ordering, the authors calculate the equilibrium swelling of the gel and smectic order parameters as a function of temperature. The authors take into account an attractive interaction parameter c between the gel and LC solvents. On increasing the value of the coupling constant c, a second-order NST of the gel is changed to a first-order one and a continuous volume phase transition of the gel is changed to a discontinuous one. The authors find a tricritical point of the gel induced by smectic ordering.     

Preparation of porous biodegradable microspheres with direct melting dispersion method

Porous biodegradable microspheres can be prepared by using the direct melting dispersion method without any noxious organic solvents, in which the biodegradable polymer is directly melted and stirred to form the liquid–liquid dispersion followed by cooling in the continuous phase, such as ethylene glycol with the higher melting temperature than polymer. In the experiment, polyhydroxybutyrate (PHB) was adopted as the biodegradable polymer. As particulate porogen, magnetite powder was pre‐mixed into the melted polymer and removed by hydrochloric acid aqueous solution after preparation of the microspheres to make them porous. It was found that the inner surface area was significantly increased by removing magnetite powder. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation of hemispherical hollow silica microcapsules with different affinity surface by using spherical vaterite calcium carbonate as template

We developed a method to prepare hemispherical hollow silica microcapsules (HHSM) with different affinity surfaces using spherical vaterite calcium carbonate (SVCC) as a template. The preparation process composed of the adhesion of calcium carbonate onto the surface of methyl methacrylate (MMA) droplets followed by suspension polymerization, the partial etching of calcium carbonate on the polymethyl methacrylate (PMMA) mother particle, the formation of silicon dioxide powder by sol–gel reaction and their deposition onto the etched flat surface of calcium carbonate, the surface modification of deposited silicon dioxide with silane coupling agent, the removal of the mother particle with acetone, the formation of silicon dioxide powder by sol–gel reaction and deposition onto the exposed hemispherical surface of calcium carbonate, and the surface modification of deposited silicon dioxide with silane coupling agent. The synthesized microcapsules had a complete hemispherical structure and both hydrophilic and hydrophobic surfaces. Copyright © 2007 John Wiley & Sons, Ltd.     

Effects of Phosphorus Substituents on Reactions of α-Alkoxyphosphonium Salts with Nucleophiles

The effects of phosphorus substituents on the reactivity of α-alkoxyphosphonium salts with nucleophiles has been explored. Reactions of α-alkoxyphosphonium salts, prepared from various acetals and tris(o-tolyl)phosphine, with a variety of nucleophiles proceeded efficiently. These processes represent the first examples of high-yielding nucleophilic substitution reactions of α-alkoxyphosphonium salts. The reactivity of these salts was determined by a balance between steric and electronic factors, respectively, represented by cone angles θ and CO stretching frequencies ν (steric and electronic parameters, respectively). In addition, a novel reaction of α-alkoxyphosphonium salts derived from Ph(3) P with Grignard reagents was observed to take place in the presence of O(2) to afford alcohols in good yields. A radical mechanism is proposed for this process that has gained support from isotope-labeling and radical-inhibition experiments.