In-process monitoring and control of doping gas concentration during vapor phase silicon epitaxial growth by using a flame photometric detector

An in-process monitoring and control method of the doping gas concentration during epitaxial growth of Si was developed. A flame photometric detector (FPD) can be used as a monitor for the PH₃ and B₂H₆ dopant concentrations in the injected doping gases. A combination of this dopant monitor with an automatic control system of the silicon source (SiHCl₃) gas concentration using an infrared spectrophotometer as a monitor, makes possible an automatic in-process control of the concentrations of dopant and of silicon source gas supplied to the reactor. The present system provides an accurate and reproducible control of impurity concentrations in Si epitaxial layers. Good correlation between the monitored signal (or the doping gas concentration) and the impurity concentration incorporated into the growth layers was confirmed for PH₃ (n-type) and B₂H₆ (p-type) doping. For the B₂H₆ doping, a divergence from the linear relationship between the doping gas concentration and the impurity concentration in the layers was observed in the level of acceptor concentration below about 10¹⁵ atoms/cm³. The transient response of the present system was measured by growing epitaxial layers with increasing and decreasing step-changes in the dopant gas flow during continuous deposition of the layers. Some interesting, but complicated, transient responses of impurity concentration in the growth layer were observed. The responses are different between the PH₃ doping and the B₂H₆ doping, and also different between increasing and decreasing steps especially for the B₂H₆ doping.     

A new triterpenoid glycoside from the leaves and stems of Duranta repens

A new triterpenoid glycoside (1) was isolated from the methanol extract of the leaves and stems of Duranta repens L. (Verbenaceae) along with 14 known compounds consisting of eight triterpenoids, four iridoids, one phenylethanoid glycoside and one flavonoid. The chemical structure of 1 was determined to be bayogenin 3-O-[β-D-glucopyranoside]-28-O-[α-L-rhamnopyranosyl-(1→5)-O-β-D-apiofuranosyl-(1→4)-O-α-L-rhamnopyranosyl-(1→2)-O-α-L-arabinopyranosyl] ester, based on spectroscopic data. In addition, the inhibitory effects of the isolates on lipoxygenase activity were examined. Among them, acteoside and apigenin resulted in 94 ± 3.6% and 82 ± 4.7% inhibition, respectively, at 0.5 mM.     

Synthesis of crosslinked poly(α-amino acids) with various functional groups

The esterification of the carboxyl group in copoly(γ-benzyl-L -glutamyl-L -glutamic acid) was carried out using N-hydroxysuccinimide and dicyclohexylcarbodimide to yield the activated site for the coupling reaction with amino compounds. The α-helix stability of the reactive copolymer thus obtained is remarkably affected in the presence of succinimide ring. This copolymer was proved to react nearly completely with amino alcohols such as 2-aminoethanol, 3-aminopropanol, and diethanolamine. The copoly(N⁵-hydroxyalkyl-L -glutamine) thus prepared is insoluble in water, since the benzyl ester remains in this copolymer. The copoly(α-amino acids) having another functional group were also prepared using aminoalkylsilane. Crosslinked poly(α-amino acids) were prepared by the reaction of the reactive copolymer with a low-molecular-weight polymer of PBLG having one amino group on each end of its main chain which was obtained from the corresponding NCA using p-diaminobenzene as an initiator. Another crosslinked polymer was prepared using an alkyl diamine such as 1,6-diaminohexane or 1,12-diaminododecane as a crosslinking reagent. The crosslinked copoly(α-amino acids) bearing the activated site are able to further react with various compounds having amino groups.     

A multivariate stochastic model with non-stationary trend component

The purposes of this paper are to introduce a multivariate non-stationary stochastic time series model without individual detrending and to extract the multiple relationships between variables. To infer the statistical relation between variables, we attempt to estimate the co-movement of multivariate non-stationary time series components. The model is expressed in state-space form, and time series components are estimated by the maximum likelihood method using numerical optimization algorithm. The Kalman filter algorithm is used to compute the likelihood of the model. The AIC procedure gives a criterion for selecting the best model fit for the data. The multiple relationship becomes clear by analysing estimated AR coefficients. Real economic data are used for a numerical example.     

Studies on the total synthesis of (-)-CP-263,114

Alkoxyl radicals have a wide range of applications in organic synthesis due to their remarkable chemical properties in molecular transformation. The present study shows two types of alkoxyl radicals (primary vs tertiary) to selectively undergo dehydrogenation and beta-scission to give rise to key structural elements of (-)-CP-263,114 (1). By alkoxyl radical transformation followed by installation of the C19-C25 (CP numbering) side chain and the bridged bisacetal unit, the functionalized CP precursor 2 was obtained.     

Preparation of poly(phosphate ester)s having bisphenol moieties as mesogenic units in the main chain

Poly(phosphate ester)s, PPE 1a–d , were synthesized from polycondensation of methyl phosphorodichloridate (MPDC) with various bisphenols such as 4,4′-biphenol 1a , 4,4′-dihydroxyphenylether 1b , bis(4-hydroxyphenyl)methane 1c , and 3,3′-dimethyl-4,4′-dihy-droxybiphenyl 1d . PPE 2a–d with hexamethylene spacers were also obtained from poly-condensation of MPDC with 4,4′-bis(6-hydroxyhexyloxy)biphenyl 2a , 4,4′-di(6-hydroxyhexyloxy)phenyl ether 2b , bis[4-(6-hydroxyhexyloxy)phenyl]methane 2c , and 3,3′-dimethyl 4,4′-di(6-hydroxyhexyloxy)biphenyl 2d . The degree of crystallinity of PPE 1a–1d without hexamethylene spacer was 3.3–17.6%, whereas PPE 2a and PPE 2b which exhibit mesomorphic behavior were 20.1 and 18.6%, respectively. PPE 2a and PPE 2b show the mesophase at 139.6–195.5°C and 42.4–66.3°C, respectively. PPE 2c and PPE 2d were obtained as rubbery. From pyrolysis of PPE in air the temperature corresponding to 5% weight loss was found to be 322–408°C and 284–291°C for PPE 1 and PPE 2 , respectively. It was also found that PPE 2a was enzymatically degraded by phospholipase C. © 1994 John Wiley & Sons, Inc.     

Magic-numbered Au(n) clusters protected by glutathione monolayers (n = 18, 21, 25, 28, 32, 39): isolation and spectroscopic characterization

Small gold clusters (<1 nm) protected by a glutathione (GSH) monolayer were fractionated into six components by polyacrylamide gel electrophoresis, and their chemical compositions were investigated by electrospray ionization mass spectroscopy. The results demonstrate isolation of a series of magic-numbered gold clusters, Au18(SG)11, Au21(SG)12, Au25+/-1(SG)14+/-1, Au28(SG)16, Au32(SG)18, and Au39(SG)23. Their optical absorption spectra are highly structured with clear absorption onsets, which shift toward higher energies with reduction of the core size. These molecular-like gold clusters exhibit visible photoluminescence. The results reported herein provide helpful guidelines or starting points for further experimental and theoretical studies on structures, stabilities, and optical properties of monolayer-protected gold clusters.     

Complete reversal in regioselectivity in the Baeyer-Villiger reaction of an alpha-CF(3)-ketone and theoretical rationale for axial orientation of sterically demanding CF(3) group at the transition state

The regioselectivity of the Baeyer-Villiger reaction of alpha-CF(3)-ketone is completely reversed from that in alpha-F(eq)-ketone. Theoretical study rationalized that the reaction proceeds with the sterically demanding CF(3) group in an axial orientation by strong dipole interaction. The guiding principle that strong dipole interaction can overcome steric repulsion as a determining factor not only in regio- but also in stereocontrol is proposed. [reaction: see text]     

Total synthesis of (+)-muconin

(+)-Muconin (1), isolated from the leaves of Rollinia mucosa (Jacq.) Baill. (Annonaceae), is a sequential THF/THP-possessing acetogenin that exhibits potent and selective in vitro cytotoxicity toward pancreatic and breast tumor cell lines. In this study, a new route was established for obtaining (+)-muconin (1) starting with (-)-muricatacin (2), a compound recently synthesized via the novel alpha-C-H hydroxyalkylation and alpha'-C-H oxidation of tetrahydrofuran.