Two-particle correlations in 360 GeV/cp p interactions

Two particle correlations of hadrons produced in 360 GeV/cpp interactions are investigated in the transverse plane and in rapidity. The data were obtained at the European hybrid spectrometer equipped with a rapid cycling bubble chamber. The observed transverse and rapidity correlations are compared with the one string LUND-and a two string dual parton-model. These models predict in general stronger correlations in the transverse plane and much weaker correlations in rapidity than found in the data. The LUND-FRITIOF-and multichain dual parton models provide a better reproduction of the data, although the agreement is not yet satisfactory. Only the UA5 cluster model GENCL shows agreement with the data.     

Formal total synthesis of aspergillide A

The formal total synthesis of aspergillide A 1 is described. The cross-metathesis of enone 6 with 6-hepten-2-ol derivative 5 provided E-olefin 15 corresponding to the C₄-C₁₄ backbone of 1. The CBS asymmetric reduction of 15 gave allyl alcohol 16, which was transformed into β-alkoxyacrylate 4 which had a formyl group. SmI₂-induced reductive cyclization of 4 gave a 2,6-syn-2,3-trans THP derivative 3 in good yield. After methoxymethylation of 3, the resulting compound 19 was submitted to desilylation and hydrolysis, to afford Fuwa’s key intermediate 2 for the total synthesis of 1.     

Development of an optical fiber hydrophone with fiber Bragg grating

A new type of optical fiber hydrophone is constructed with a fiber Bragg grating (FBG) based on the intensity modulation of laser light in an FBG under the influence of sound pressure. The FBG hydrophone shows linearity, with dynamic range about 70 dB. It can measure amplitude and phase of an acoustic field in real time, and operates in a wide range of acoustic frequency, at least from 1 kHz to 3 MHz. No signal distortion is observed in the detected signal. Because of the simplicity in its operating principle and geometry, an FBG hydrophone is expected to be an acoustic sensor of high practicality compared to a conventional optical fiber hydrophone.     

Cooperative Regulation of Vocal Fold Morphology and Stress by the Cricothyroid and Thyroarytenoid Muscles

Voice is produced by vibrations of vocal folds that consist of multiple layers. The portion of the vocal fold tissue that vibrates varies depending primarily on laryngeal muscle activity. The effective depth of tissue vibration should significantly influence the vibrational behavior of the tissue and resulting voice quality. However, thus far, the effect of the activation of individual muscles on the effective depth is not well understood. In this study, a three-dimensional finite element analysis is performed to investigate the effect of the activation of two major laryngeal muscles, the cricothyroid (CT) and thyroarytenoid (TA) muscles, on vocal fold morphology and stress distribution in the tissue. Because structures that bear less stress can easily be deformed and involved in vibration, information on the morphology and stress distribution may provide a useful estimate of the effective depth. The results of the analyses indicate that the two muscles perform distinct roles, which allow cooperative control of the morphology and stress. When the CT muscle is activated, the tip region of the vocal folds becomes thinner and curves upward, resulting in the elevation of the stress magnitude all over the tissue to a certain degree that depends on the stiffness of each layer. On the other hand, the TA muscle acts to suppress the morphological change and controls the stress magnitude in a position-dependent manner. Thus, the present analyses demonstrate quantitative relationships between the two muscles in their cooperative regulation of vocal fold morphology and stress.     

Synthesis and characterization of water-soluble silver(I) complexes with L-histidine (H2his) and (S)-(-)-2-pyrrolidone-5-carboxylic acid (H2pyrrld) showing a wide spectrum of effective antibacterial and antifungal activities. Crystal structures of chiral helical polymers [Ag(Hhis)]n and ([Ag(Hpyrrld)]2)n in the solid state

Two water-soluble, silver(I) complexes showing a wide spectrum of effective antibacterial and antifungal activities, i.e., ([Ag(Hhis)].0.2EtOH)2 (1; H2his = L-histidine) and [Ag(Hpyrrld)]2 (3; H2pyrrld = (S)-(-)-2-pyrrolidone-5-carboxylic acid) were prepared. In aqueous solution 1 and 3 were present as dimers, whereas in the solid state they were polymers. Crystallization of 1 by slow evaporation and/or vapor diffusion gave water-insoluble crystals of [Ag(Hhis)]n (2) showing modest antimicrobial activities. The complex 1 in the solid state is a polymer formed by intermolecular hydrogen-bonding interactions between dimeric [Ag(Hhis)]2 cores, while 2 is a different polymer without a core complex. X-ray crystallography revealed that 2 was a left-handed helical polymer consisting of a bent, 2-coordinate silver(I) atom bonding to the Namino atom of one Hhis- ligand and the N pi atom of a different Hhis- ligand. Of particular note is the fact that Ocarboxyl atoms do not participate in the coordination. X-ray crystallography also revealed that 3 was a left-handed helical polymer formed by self-assembly of dimeric [Ag(Hpyrrld)]2 cores with an intramolecular metal(I)-metal(I) interaction (Ag-Ag distance, 2.9022(7) A). The FT-IR and the solid-state 13C and 15N NMR spectra showed that the dimeric core of 1 was formed through Ag-N bonds, while that of 3 was formed through Ag-O bonds. The molecular ions of 1 and 3 were detected by the positive-ion electrospray ionization (ESI) mass spectrometry. For 1-3, characterization by elemental analysis, TG/DTA, FT-IR, and variable-temperature solid-state 13C NMR and room-temperature 15N NMR measurements was performed, and for 1 and 3, that by solution molecular weight measurements and solution (109Ag, 1H, and 13C) NMR spectroscopies was also carried out. The antibacterial and antifungal activities of 1 and 3 were remarkable and comparable to those of the previous silver(I)-N-heterocycle complexes.     

Optimization of Parameters for Cr(VI) Adsorption on Used Black Tea Leaves

Dynamic characteristics of Cr(VI) sorption on used black tea leaves (UBTLs) as a low-cost adsorbent are studied. Batch experiments were conducted to evaluate the effects of Cr(VI) concentration, solution pH and temperature on the removal process. Both of adsorption and reduction, involved in the process, are affected by the processing parameters. The adsorption kinetics is described successfully using pseudo-second order rate equation and the rate constant decreases with increasing the initial concentration of Cr(VI) up to 150 mg/L (for 0.1 g/L UBTLs) then becomes slow. Experimental and calculated kinetic data for equilibrium are well expressed by Langmuir isotherm. The solution pH has a profound effect on the adsorption rate. The rate constant increases linearly with an increase in temperature, and the low value of activation energy of adsorption, 16.3 kJ/mol, indicates that Cr(VI) is easily adsorbed on UBTLs. The maximum Cr(VI) adsorptive conditions, with a minimum reduction, were achieved from the dynamics of operational parameters: the initial Cr(VI) concentration < 150 mg/L (for 0.1 g/L UBTLs); the initial solution pH = 1.54–2.00 and the processing temperature < 50 ^∘C, for the possibility of its practical application.     

Effect of phenyl substitution on the lifetime and product distribution of cyclobutylidene: preference change in the rearrangements via 1,2-carbon shift and 1,2-hydrogen shift

Steady state and laser flash photolytic experiments with precursors 6 and 11 revealed that diphenyl substitution affects the lifetime and reaction mode of cyclobutylidene. 2,2-Diphenylcyclobutylidene 3 (τ <0.1 ns) produces methylenecyclopropane 1 via 1,2-carbon in significant preference to the positional isomer 2 or cyclobutene 4. On the other hand, 3,3-diphenylcyclobutylidene 5 (τ = ca. 4 ns) gives 1,2-hydrogen shift product 4 more favorably than 1,2-carbon shift product 2 together with formal carbene dimer 14. MRMP2//MP2 calculations afford useful results to understand the interrelationship among substitution, structure, and reactivity.     

Structural design of easy-axis magnetic anisotropy and determination of anisotropic parameters of Ln(III)-Cu(II) single-molecule magnets

Four dinuclear Ln^III? Cu^II complexes with Ln=Tb ( 1 ), Dy ( 2 ), Ho ( 3 ), and Er ( 4 ) were synthesized to investigate the relationship between their respective magnetic anisotropies and ligand‐field geometries. These complexes were crystallographically isostructural, and a uni‐axial ligand field was achieved by using three phenoxo oxygen groups. Complexes 1 and 2 displayed typical single‐molecule magnet (SMM) behaviors, of which the out‐of‐phase susceptibilities were observed in the temperature range of 1.8–5.0 K ( 1 ) and 1.8–20.0 K ( 2 ). The Cole–Cole plots exhibited a semicircular shape with α parameters in the range of 0.08–0.18 (2.6–4.0 K) and 0.07–0.24 (3.5–7.0 K). The energy barriers Δ/k_B were estimated from the Arrhenius plots to be 32.9(4) K for 1 and 26.0(5) K for 2 . Complex 3 displayed a slow magnetic relaxation below 3.0 K, whereas complex 4 did not show any frequency‐dependent behavior for both in‐phase and out‐of‐phase susceptibilities, which indicates that easy‐axis anisotropy was absent. The temperature dependence of the dc susceptibilities for the field‐aligned samples of 1 – 3 revealed that the χ_MT value continuously increased as the temperature was lowered, which indicates the presence of low‐lying Stark sublevels with the highest |J_z| values. In contrast, complex 4 displayed a smaller and temperature‐independent χ_MT value, which also indicates that easy‐axis anisotropy was absent. Simultaneous analyses were carried out for 1 – 3 to determine the magnetic anisotropy parameters on the basis of the Hamiltonian that considers B₂⁰, B₄⁰, and B₆⁰.     

13C chemical shifts of propane molecules encaged in structure II clathrate hydrate

Experimental NMR measurements for (13)C chemical shifts of propane molecules encaged in 16-hedral cages of structure II clathrate hydrate were conducted to investigate the effects of guest-host interaction of pure propane clathrate on the (13)C chemical shifts of propane guests. Experimental (13)C NMR measurements revealed that the clathrate hydration of propane reverses the (13)C chemical shifts of methyl and methylene carbons in propane guests to gaseous propane at room temperature and atmospheric pressure or isolated propane, suggesting a change in magnetic environment around the propane guest by the clathrate hydration. Inversion of the (13)C chemical shifts of propane clathrate suggests that the deshielding effect of the water cage on the methyl carbons of the propane molecule encaged in the 16-hedral cage is greater than that on its methylene carbon.