Structural modulation of Cu(I) and Cu(II) complexes of sterically hindered tripyridine ligands by the bridgehead alkyl groups

Structures of Cu(I) and Cu(II) complexes of sterically hindered tripyridine ligands RL = tris(6-methyl-2-pyridyl)methane (HL), 1,1,1-tris(6-methyl-2-pyridyl)ethane (MeL), and 1,1,1-tris(6-methyl-2-pyridyl)propane (EtL), [Cu(RL)(MeCN)]PF(6) (1-3), [Cu(RL)(SO(4))] (4-6), and [Cu(RL)(NO(3))(2)] (7-9), have been explored in the solid state and in solution to gain some insights into modulation of the copper coordination structures by bridgehead alkyl groups (CH, CMe, and CEt). The crystal structures of 1-9 show that RL binds a copper ion in a tridentate facial-capping mode, except for 3, where EtL chelates in a bidentate mode with two pyridyl nitrogen atoms. To avoid the steric repulsion between the bridgehead alkyl group and the 3-H(py) atoms, the pyridine rings in Cu(I) and Cu(II) complexes of MeL and EtL shift toward the Cu side as compared to those in Cu(I) and Cu(II) complexes of HL, leading to the significant differences in the nonbonding interatomic distances, H.H (between the 3-H(py) atoms), N.N (between the N(py) atoms), and C.C (between the 6-Me carbon atoms), the Cu-N(py), Cu-N(MeCN), and Cu-O bond distances, and the tilt of the pyridine rings. The copper coordination geometries in 4-6, where a SO(4) ligand chelates in a bidentate mode, are varied from a square pyramid of 4 to distorted trigonal bipyramids of 5 and 6. Such structural differences are not observed for 7-9, where two NO(3) ligands coordinate in a monodentate mode. The structures of 1-9 in solution are investigated by means of the electronic, (1)H NMR, and ESR spectroscopy. The (1)H NMR spectra show that the structures of 1-3 in the solid state are kept in solution with rapid coordination exchange of the pyridine rings. The electronic and the ESR spectra reveal the structural changes of 5 and 6 in solution. The bridgehead alkyl groups and 6-Me groups in the sterically hindered tripyridine ligand play important roles in modulating the copper coordination structures.     

Synthesis and alpha-glucosidase-inhibiting activity of a new alpha-glucosidase inhibitor, 4-O-alpha-D-glucopyranosylmoranoline and its N-substituted derivatives

Various N-substituted derivatives of 4-O-alpha-D-glucopyranosylmoranoline have been synthesized, and their inhibitory activities against rabbit sucrase and maltase have been measured, as well as their effects on postprandial hyperglycemia in the sucrose-loaded rat, 4-O-alpha-D-Glucopyranosylmoranoline was also shown to have potent hypoglycemic activity in starch-loaded dogs.     

Dicopper-dioxygen complex supported by asymmetric pentapyridine dinucleating ligand

A dicopper(I) complex supported by a novel asymmetric pentapyridine dinucleating ligand, consisting of tetradentate and tridentate metal-binding sites, has been synthesized and characterized. The dicopper(I) complex reacted with molecular oxygen at a low temperature to give an unprecedented mu-peroxo dicopper(II) complex presumably having a mu-eta1:eta2 binding mode, the spectroscopic features and the reactivity of which have been explored in detail.     

Reduction of Cu2+ to Cu+ in Xerogels Prepared from (3-Aminopropyl)Trimethoxysilane

Silica gels doped with Cu²⁺ ions were prepared from the (3-aminopropyl) trimethoxysilane (APTMOS)/tetraethoxysilane (TEOS) systems. Sols showed a broad absorption peak at 640 nm, suggesting 3–5 coordination of the aminopropyl groups to Cu²⁺. For gels prepared from APTMOS and dried at room temperature, the 640 nm peak decreased and a red-shifted absorption appeared below 400 nm within a few months. The luminescence spectra of the xerogels showed emission bands at 430–470 and 510 nm. The former and latter bands are ascribed to Cu⁺ monomer and dimer emissions, respectively. These results indicate that Cu²⁺ ions are reduced to Cu⁺. When xerogels were prepared from APTMOS/TEOS = 1 (vol/vol), the color of xerogels was blue with an absorption peak at around 670 nm, indicating no reduction of Cu²⁺ ions.     

Organochlorine Pesticides in Water,Sediment and Fish from the Nile River and Manzala Lake in Egypt

Abstract

To assess the risks of organochlorine pesticides discharged into the hydrospheric environment of Egypt, river and lake water, drinking water, suspended solids, sediments and fish were collected during 1993—1994 from the Nile River and Manzala Lake in Egypt and were transported to Japan for chemical analysis. Among different organochlorine pesticides analyzed, p,p′-DDE was the most predominant in fish (7.6 to 67 ng/g wet wt.), sediments (3.2 to 432 ng/g dry wt.) and suspended solids (5.3 tc 138 pg/L). However, in the dissolved phase of water samples HCH compounds predominated (α-HCH, 71 to 2,815 pg/L). Concentrations of organochlorine pesticides, except chlordane, were higher in Manzala Lake than in the River Nile. Concentrations of organochlorine pesticides in fish corresponded with those in sediments from each location. Comparison of organochlorine concentrations in Nile River water with those reported in earlier studies suggested a decrease in concentrations during the last decade. However, concentrations of p,p′-DDE has increased in fish. It appears that the release of this metabolite from contaminated sediment is the major source of p,p′-DDE in fish during recent years.     

Synthesis of optically inactive cellulose via cationic ring-opening polymerization

Cellulose, which comprises D-glucose and L-glucose (D,L-cellulose), was synthesized from D-glucose (1D) and L-glucose (1L) via cationic ring-opening polymerization. Specifically, the ring-opening copolymerization of 3-O-benzyl-2,6-di-O-pivaloyl-β-D-glucopyranoside (2D) and 3-O-benzyl-2,6-di-O-pivaloyl-β-D-glucopyranoside (2L), synthesized from compounds 1D and 1L, respectively, in a 1:1 ratio, afforded 3-O-benzyl-2,6-di-O-β-D,L-glucopyranan (3DL) with a degree of polymerization (DPn) of 28.5 (Mw/Mn?=?1.90) in quantitative yield. The deprotection of compound 3DL and subsequent acetylation proceeded smoothly to afford acetylated compound 4DL with a DPn of 18.6 (Mw/Mn?=?2.08). The specific rotation of acetylated compound 4DL was?+?0.01°, suggesting that acetylated compound 4DL was optically inactive cellulose triacetate. Furthermore, before acetylation, compound 4DL was an optically inactive cellulose comprising an almost racemic mixture of D-glucose and L-glucose. Compound 4DL was an amorphous polymer. This is the first reported synthesis of optically inactive D,L-cellulose.

     

Thermal or Mechanical Stimuli‐Induced Photoluminescence Color Change of a Molecular Assembly Composed of an Amphiphilic Anthracene Derivative in Water

Molecular assemblies that change photoluminescence color in response to thermal or mechanical stimulation without dissociation into the monomeric states in water are described herein. A dumbbell‐shaped amphiphilic compound forms micellar molecular assemblies in water and exhibits yellow photoluminescence derived from excimer formation of the luminescent core, which contains a 2,6‐diethynylanthracene moiety. Annealing of the aqueous solution induces a photoluminescence color change from yellow to green (λ_{em, max}=558→525 nm). The same photoluminescence color change is also achieved by rubbing the yellow‐photoluminescence‐emitting molecular assemblies adsorbed on glass substrates with cotton wool in water. The observed green photoluminescence is ascribed to micelles that are distinct from the yellow‐photoluminescence‐emitting micelles, on the basis of transmission electron microscopy observations, atomic force microscopy observations, and dynamic light scattering measurements. We examined the relationship between the structure of the molecular assemblies and the photophysical properties of the anthracene derivative in water before and after thermal or mechanical stimulation and concluded that thermal or mechanical stimuli‐induced slight changes of the molecular‐assembled structures in the micelles result in the change in the photoluminescence color from yellow to green in water.     

Structure and synthesis of a new hypotensive vasodilator isolated from Streptomyces aureofaciens

The structure elucidation and synthesis of WS-1228 A, produced by $\text{Streptomyces aureofaciens}$, were described.     

Synthesis of (--)-Muricatacin via alpha- and alpha'-C-H bond functionalization of tetrahydrofuran

(--)-Muricatacin, a potent cytotoxic (4R,5R)-5-hydroxyheptadecan-4-olide, has been synthesized through alpha-C--H hydroxyalkylation and alpha'-C--H oxidation of tetrahydrofuran. This study presents a novel method for C--H bond functionalization as a means for preparing gamma-(hydroxyalkyl)-gamma-butyrolactones.