Colchicine Models: Synthesis and Binding to Tubulin of Tertamethoxybiphenyls

Syntheis of tetramethoxybiphenyl 21 was accomplished from 4-phenylcylohexane-1,3-dione 13 by aromatization to biphenyl 19 and reductive removal of the phenolic OH group as phenyltetrazolyl ether. Tertramethoxybiphenyls 34 and 40 were obtained from 4-phenylcyclohexenone 26 via ester 27 . The tetramethoxybiphenyls 21, 34 , and 40 , and analogs 28, 29 , and 31 were evaluated for antitubulin activity and as antimitotic agents with L1210 murine leukemia cells. Compounds 31 and 34 had significant effects on the in-vitro polymerization of tubulin. Compound 31 was the most cytotoxic of the six new biphenyls studied (IC₅₀ for cell growth, 0.6M ) and caused the accumulation of cells in metaphase arrest.     

Rapid decomposition and dissolution of silicate rocks by fusion with lithium tetraborate and lithium sulphate

Fusion with 1.0 g of Li(2)B(4)O(7)Li(2)SO(4) (2:1) mixture in a platinum crucible at 1000 degrees will decompose 0.1 g of silicate rock in less than 10-15 min, and the cooled fusion cake can be completely dissolved by 20 ml of 1.2M hydrochloric acid at 90-100 degrees in approximately 5 min.     

Colchicine models: Synthesis and Antitubulin Activity of 2′-Monosubstituted and 2′, 5-Disubstituted 2,3,4,4′-Tetramethoxy-1,1′-biphenyls. Synthesis of 4,4′, 5′, 6′-tetramethoxy-1,1′-biphenyl-2,3′-dicarboxylic acid

Reductive amination of 2,3,4,4′-tetramethoxtybiphenyl-2-carbaldehyde ( 4 ) with MeNH₂ afforded methylamine 5 (Scheme 1), Hydroxymethylation of amine 8 , prepared similarly from 4 by reductive amination with benzylamine followed by N-methylation, afforded alcohol 12 which was converted the 5-methyl-substituted methylamine 14 by conventional chemical reactions (Scheme 2), Methylamine 14 was also obtained from ester 16 after hydroxymethylation to alcohol 17 and conventional manipulation of alcohol and ester functions (Scheme 2). Both amines 5 and 14 as well as the 2′, 5-dimethyl-substituted biphenyl 26 prepared from the dialdehyde 25 by a Wolff-Kishner reduction, did not show noteworthy activity in the tubulin binding assay or as inhibitors of tubulin polymerization (Table). However, the 2′ethyl-substituted biphebyl 11 prepared from 4 by reaction with MeLi followed by dehyderation and catalytic reduction of styrene 10 (Scheme 1) showed appreciable activity in both assays, coming close to that of known phenyltropolone models. The X-ray analysis of 14 ·HCl and 11 showed significant difference in the orientation of the rings with respect to one another (Fig.).     

Computer-aided measurement of kinetic parameters of electrode reactions of cobalt(III)—ammine complexes at mercury electrodes

A computer-aided technique based on Tast polarography is examined for the determination of kinetic parameters of electrode reactions. It is particularly useful for the investigation of unstable species because of the simple and rapid processing of data. Kinetic parameters of cobalt(III)—ammine complexes at mercury electrodes are given for [Co(NH₃)₆]Cl₃, [Co(H₂O)(NH₃)₅](ClO₄)₃, [Co(NO₃)(NH₃)₅](NO₃)₂ [CoF(NH₃)₅](Cl0₄)₂, [Co(C0₃)(NH₃)₅] NO₃ ,cis-[Co(H₂O)₂(NH₃)₄] (Cl0₄)₃ [Co(CO₃)(NH₃)₄] NO₃ · 0.5H₂0, [Co(ox)(NH₃)₄]Cl · H₂0, and NH₄[Co(ox)₂(NH₃)₂] · H₂O, which are obtained in solutions containing 0.1 M acetate buffer and 0.005% gelatin at 25°C.     

Adsorption Equilibrium Equation of Carboxylic Acids on Anion-Exchange Resins in Water

The adsorption of propionic acid and benzoic acid on anion-exchange resins was analyzed, and an adsorption equilibrium equation of carboxylic acids was proposed. The adsorption of carboxylic acids on the anion-exchange resins was considered to be the sum of the physical adsorption of the molecule and the ion-exchange adsorption of the ion, which were independent of each other. For the physical adsorption of carboxylic acids, it was conformed to the Freundlich equation. For the ion-exchange adsorption of carboxylate ions, the equilibrium equation corresponded well with the experimental results for wide ranges of concentration and pH. The equation contains a selectivity coefficient S(A)(Cl) for the chloride ion versus the carboxylate ion, which was considered essentially a constant. The influent of the bicarbonate ion from carbon dioxide in air could also be expressed by the additional equilibrium equation with the selectivity coefficient S(HCO(3))(Cl) for the chloride ion versus the bicarbonate ion. Consequently, an adsorption equilibrium equation can estimate the equilibrium adsorption amounts. Even the effect of a coexisting bicarbonate ion is inconsequential when the parameters of the Freundlich isotherm equation and the selectivity coefficients of the carboxylate ion and the bicarbonate ion in each resin are determined in advance. Copyright 2001 Academic Press.     

Novel rapid decomposition and dissolution method for silicates using a mixed potassium metaborate/potassium carbonate flux

A novel method for the rapid dissolution of fused silicates in mineral acid is described. Fusion with 2.5 g of a KBO(2)-K(2)CO(3) (3:2, w/w) mixture in a platinum crucible at 1000 degrees C will decompose 0.1 g of silicate samples such as basalt rock, glass sand and powdered glass in 10 min, and the cooled fusion cakes can be completely dissolved by 20 ml of 3 N mineral acids such as hydrochloric, nitric and sulfuric acids in less than 1 min at about 50 degrees C. Fusion with 5.0 g of a KBO(2)-K(2)CO(3) (3:2, w/w) mixture can completely decompose 0.1 g of chrome refractory in 20 min and the cooled melt can be dissolved by 80 ml of 3 N hydrochloric or sulfuric acids in less than 30 s.     

Polymeric membrane sodium-selective electrodes based on calix[4]arene ionophores

Six kinds of tetra alkylester type calix[4]arene derivatives, (R₁=R₂=CH₃1, C₂H₅2, C₃H₇3,n-C₄H₉4,t-C₄H₉5,n-C₁₀H₂₁6), a diethyl-didecyl mixed ester type (R₁=C₂H₅, R₂ =C₁₀H₂₁7), and three kinds of lower rim bridged types (R₁=C₂H₅, R₂–R₂=(CH₂)₁₀8, (CH₂)₁₂9, (CH₂)₂(OCH₂CH₂)₃10) were characterized by electrochemical measurement to elucidate the effect of the length of the alkyl group of alkoxycarbonyl substituents on Na⁺ selectivity. To obtain excellent Na⁺ selective ionophores, introduction of short chain alkyl groups rather than long chain ones, such as a decyl group, and maintenance of sufficient solubility of the calix[4]arene derivatives in the membrane solvent are required concurrently. Among the calix[4]arenes tested, 25,26,27,28-tetrakis[(ethoxycarbonyl)methoxy]-p-tert-butylcalix[4]arene2, and the diethyl-didecyl mixed ester type derivative7 are the best ionophores for a Na⁺ selective electrode. On the other hand, sodium selectivity of the bridged type derivative9 is comparable or even superior to that of the known bis(12-crown-4).This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

Label-free electronic detection of DNA-hybridization on nanogapped gold particle film

A label-free high-resolution DNA sensing technique using a nanogapped gold particle film is presented to acquire nucleotide polymorphism information, which can be read by electronic protocols.     

ECE mechanism as a tool for the investigation of unstable metal complexes: Part I. Electrochemical reduction of trans-[CoBr2(N)4]+-type complexes on the mercury electrode

A polarographic investigation of trans-[CoBr₂(N)₄]⁺-type complexe where (N)₄ represents (NH₃)₄, (ethylenediamine)₂ and (propylenediamine)₂, has been carried out in acetate buffer solutions. These complexes gave two polarographic waves; the first wave corresponds to the reduction of Co(III) to Co(II) and the second to the reduction of Co(II) to Co(0). The relation between current and time of the first wave in a positive potential is dependent on the dissolution wave due to bromide ions produced by acid hydrolysis and parallel ECE mechanism. Overall reaction is as follows: at the electrode surface, [Co(III)Br₂(N)₄]⁺+e^-→[Co(II)Br₂(N)₄] [Co(II)Br₂(N)₄]+6H₂O→[Co(II)(H₂O₆]²⁺+2Br^-+(N)₄ 2Br^-+2Hg→Hg₂Br₂+2e and in the solution, [Co(III)Br₂(N)₄]⁺+2H₂O→[Co(III)(H₂O₂(N)₄]³⁺+2Br^-The effects of the acid hydrolysis of a tervalent cobalt complex on the current—potential curve were simulated.