Hydrolytic Degradation and Monomer Recovery of Poly(butylene succinate) and Poly(butylene succinate/adipate) in the Melt

Aliphatic dicarboxylic acid/aliphatic diol‐derived polyesters, poly(butylene succinate) and poly(butylene succinate/adipate), have been hydrolytically degraded in the melt in high‐temperature and high‐pressure water over a wide temperature range of 180–300 °C for periods of up to 30 min. The formation/decomposition of succinic acid (SA), adipic acid (AA), and butane‐1,4‐diol (BD), plus the molecular weight change of PBS and PBSA were then investigated. SA and AA were recovered at maximum yields of 65–80%, whereas BD was recovered at a maximum yield of only 30%, probably because of its decomposition. The obtained results were compared with those reported for aliphatic hydroxycarboxylic acid‐derived polyesters and aromatic dicarboxylic acid/aliphatic diol‐derived polyesters.

     

Study of molecular aggregation of artificial amyloid in a langmuir monolayer by infrared spectroscopy

A synthesized peptidolipid (C18IIGLM-NH2) comprised of a single C18-saturated hydrocarbon chain connected to the amino acid sequence IIGLM terminated with the NH2 group was spread on water, which formed a stable Langmuir monolayer. The Langmuir and Langmuir-Blodgett (LB) films have been characterized by measurements of surface pressure-area (pi-A) and surface potential-area (DeltaV-A) isotherms and infrared multiple-angle incidence resolution spectrometry (MAIRS). The Langmuir monolayer had a significantly larger limiting molecular area than that of a similar molecule of C18IIGLM-OH, which was reported in our previous study. The surface dipole moment analysis coupled with the pi-A isotherm suggested that the C18IIGLM-NH2 monolayer was extraordinarily stiff and the fundamental structure of the monolayer was brought about before the monolayer compression. The infrared MAIRS analysis of the C18IIGLM-NH2 LB film revealed that the backbone structure of the monolayer was the 'antiparallel' beta sheet aligned parallel to the substrate. Since the C18IIGLM-OH LB film was made of 'parallel' beta sheet with a random orientation, it has been found that the present C18IIGLM-NH2 Langmuir monolayer has a largely different monolayer structure, although the chemical structures are slightly different from each other by the terminal group only.     

Simultaneous determination of beta-blockers in human plasma using liquid chromatography-tandem mass spectrometry

A detailed procedure for the analysis of four beta-blockers, acebutolol, labetalol, metoprolol and propranolol, in human plasma by high-performance liquid chromatography (LC)-tandem mass spectrometry (MS-MS) using an MSpak GF column, which enables direct injection of crude plasma samples, is presented. Protein and/or macromolecule matrix compounds were eluted first from the column, while the drugs were retained on the polymer stationary phase of the MSpak GF column. The analytes retained on the column were then eluted into an acetonitrile-rich mobile phase using a gradient separation technique. All drugs showed base peak ions due to [M + H]+ ions by LC-MS with positive ion electrospray ionization, and the product ions were produced from each [M + H]+ ion by LC-MS-MS. Quantification was performed by selected reaction monitoring. The recoveries of the four beta-blockers spiked into plasma were 73.5-89.9%. The regression equations for all compounds showed excellent linearity in the range 10-1000 ng/mL of plasma, with the exception of propranolol (10-800 ng/mL). The limits of detection and quantification for each drug were 1-3 and 10 ng/mL, respectively, of plasma. The intra- and inter-day coefficients of variation for all drugs in plasma were not greater than 10.9%.     

A Class of Asymmetric Gapped Hamiltonians on Quantum Spin Chains and its Characterization I

We introduce a class of gapped Hamiltonians on quantum spin chains, which allows asymmetric edge ground states. This class is an asymmetric generalization of the class of Hamiltonians (Fannes et al. Commun Math Phys 144:443–490, 1992). It can be characterized by five qualitative physical properties of ground state structures. In this Part I, we introduce the models and investigate their properties.     

Nanosphere formation in copolymerization of methyl methacrylate with poly(ethylene glycol) macromonomers

Polymeric nanospheres consisting of poly(methyl methacrylate) (PMMA) cores and poly(ethylene glycol) (PEG) branches on their surfaces were prepared by free radical copolymerization of methyl methacrylate (MMA) with PEG macromonomers in ethanol/water mixed solvents. PEG macromonomers having a methacryloyl (MMA‐PEG) and p‐vinylbenzyl (St‐PEG) end group were used. It has become clear that the obtained polymer dispersions form three kinds of states, particle dispersion (milky solution), clear solution, and gel/precipitation. It was found that the reaction parameters such as MMA concentration, molecular weight, and concentration of PEG macromonomers, and water content can affect nanosphere formation in a copolymerization system. The water volume fraction of mixed ethanol/water solvents affected the particle size of the nanospheres. These differences in the formation of nanospheres were due to the solvophilic/solvophobic balance between the copolymers and solvents during the self‐assembling process of the copolymers. The sizes of nanospheres can be controlled by varying concentration of PEG macromonomer and water content in solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1811–1817, 2000     

Synthesis and functionalities of poly(N-vinylalkylamide). V. Control of a lower critical solution temperature of poly(N-vinylalkylamide)

N-vinyl-n-butyramide (NVBA), N-vinylisovaleramide (NVIVA), and N-vinyl-n-valeramide (NVVA), which are N-vinylalkylamides with different alkyl groups were synthesized and their solution behavior in a polymeric form was examined. Copolymers of N-vinylisobutyramide (NVIBA) with N-vinylacetamide (NVA), NVIBA with NVVA, and NVVA with NVA were prepared by the solution polymerization to control the LCSTs. The resultant polyNVBA showed a lower critical solution temperature (LCST) sharply at 32°C, but polyN-vinylisovaleramide (polyNVIVA) and polyN-vinyl-n-valeramide(polyNVVA) that have n-butyl and isobutyl groups, respectively, on their side chains were insoluble even in cold water. The water solubility of the resulting polymers was found to vary, depending on the molecular shapes as well as the side chain length of the alkyl groups in question. The copolymers consisting of NVVA, NVIBA, and NVA in water showed LCSTs sharply between 10 and 90°C, depending on changes in their comonomer content. It was found that the changes in LCST that are caused by the incorporation of comonomers are due to changes in the overall hydrophilicity of the polymer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3087–3094, 1997     

Graft copolymers having hydrophobic backbone and hydrophilic branches. XXIII. Particle size control of poly(ethylene glycol)-coated polystyrene nanoparticles prepared by macromonomer method

Monodisperse polymeric nanospheres, which consist of polystyrene cores and poly(ethylene glycol) (PEG) branches on their surfaces, were prepared by the dispersion copolymerization of styrene (St) with PEG macromonomers that had a methacryloyl (MMA-PEG) or p-vinylbenzyl (St-PEG) end group in various organic solvent/water media. Electron spectroscopy for chemical analysis (ESCA) of the nanosphere surfaces indicated that PEG macromonomer chains were favorably located on their surfaces. The morphologies of the nanospheres were observed via a scanning electron micrograph (SEM), and particle sizes were estimated by a submicron particle analyzer. When both the concentration of macromonomers and molecular weight were higher, small nanospheres in diameter were obtained. Larger nanospheres in diameter were obtained using macromonomers with low molecular weight at lower concentration. The functions that correlate the diameter (D_n) on different concentration units were D_n = K[St]^0.64[MMA-PEG]^{−0.53±0.01}[I]^−0.49 and D_n = K[St]^0.80[St-PEG]^{−0.69±0.01}[I]^−0.22, where [I], [St], [MMA-PEG], and [St-PEG] are initiator, styrene, MMA-PEG, and St-PEG macromonomer concentration in feed, respectively. When the reaction parameters such as the molecular weight of the macromonomers were properly chosen, the particle size could be controlled in a range from ca. 80 to 3100 nm. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2155–2166, 1999     

Synthesis of 1-(5,6-dihydro-2H-thiopyran-2-yl)uracil by a Pummerer-type thioglycosylation reaction: the regioselectivity of allylic substitution

1-(5,6-Dihydro-2H-thiopyran-2-yl)uracil derivatives, a new 4′-thio-D4-nucleoside analogue, were synthesized by reacting 5,6-dihydro-2H-thiopyran sulfoxide and persilylated uracil in a Pummerer-type thioglycosylation reaction. The reaction of 5-alkyl substituted dihydrothiopyran sulfoxide 7 only gave 1-(dihydrothiopyran-2-yl)uracil 9. On the other hand, the reaction with a 5-siloxy substituted derivative of 7 resulted in a mixture of products with the uracil moiety at either the α- or the γ-position. The use of a prolonged reaction time resulted in the exclusive formation of the 4-substituted dihydrothiopyran derivative 10. The result suggests that an equilibrium is operative in the formation of the α- and γ-adducts and that the latter should be more thermodynamically stable than the former. This conclusion was also supported by theoretical calculations.     

Development of a liquid chromatography/time-of-flight mass spectrometric method for the simultaneous determination of trichothecenes, zearalenone and aflatoxins in foodstuffs

A liquid chromatography/atmospheric pressure chemical ionization mass spectrometry (LC/APCI-MS) method based on time-of-flight MS (TOFMS) with a real-time reference mass correction technique was developed for the simultaneous determination of Fusarium mycotoxins (nivalenol, deoxynivalenol, fusarenon X, 3-acetyldeoxynivalenol, 15-acetyldeoxynivalenol, HT-2 toxin, T-2 toxin, diacetoxyscirpenol, zearalenone) and Aspergillus mycotoxins (aflatoxin B1, aflatoxin B2, aflatoxin G1, aflatoxin G2) in corn, wheat, cornflakes and biscuits. Samples were cleaned up with a MultiSep #226 column. Detection of the mycotoxins was carried out in exact mass chromatograms with a mass window of 0.03 Th. Calibration curves were linear from 2 to 200 ng x mL(-1) for trichothecenes and zearalenone, and 0.2 to 20 ng x mL(-1) for aflatoxins, by 20 microL injection. The limits of detection ranged from 0.1 to 6.1 ng x g(-1) in foodstuffs analyzed in this study. The LC/TOFMS method was found to be suitable for the screening of multiple mycotoxins in foodstuffs rapidly and with high sensitivity, and its performance was demonstrated for the confirmation for target mycotoxins.     

Large Deviations in Quantum Spin Chains

We show the full large deviation principle for KMS-states and C*-finitely correlated states on a quantum spin chain. We cover general local observables. Our main tool is Ruelle’s transfer operator method.