Calculation of skin permeability coefficient for ionized and unionized species of indomethacin.

The contribution of ionized and unionized species to the overall permeation of weak electrolytes through the skin was investigated to determine the effect of pH in the vehicle on the permeability of indomethacin (IDM), as a model drug, through hairless rat skin. The permeability of IDM through polydimethylsiloxane (silicone) and poly(2-hydroxyethyl methacrylate) (pHEMA) membranes which may reflect lipid and aqueous pathway, respectively, was also measured for comparison. As the pH in the vehicle increased, there was an exponential increase in the skin permeation rate of IDM. The permeation rate of IDM through the silicone membrane was constant independent of pH, whereas that through the pHEMA membrane increased with increasing pH, similar to the skin permeation. The permeability coefficients of ionized and unionized species through the skin estimated using the skin permeation rates and solubilities of IDM at various pHs were 1.50 x 10(-7) and 2.79 x 10(-5) cm/s, respectively. These results indicated that the permeation of ionized species greatly contributed to the total permeation of IDM at higher pH, and that the total permeation rate of IDM was determined by the permeation of unionized species at lower pH. These contributions depend on the pH and pKa values and the ratio of permeability coefficient of each species. It was also confirmed that the skin has at least two kinds of permeation pathways and these two species permeate through a different pathway.     

Synthesis of a Stimuli‐Responsive P‐Chiral Polymer with Chiral Phosphorus Atoms and Azobenzene Moieties in the Main Chain

A reaction of the P‐chiral compound (S,S)‐1,2‐bis(boranato(tert‐butyl)methylphosphino)ethane with an azobenzene derivative gave stimuli‐responsive polymers with P‐chiral phosphines in the main chain. This is the first example of a stimuli‐responsive P‐chiral polymer. The polymer isomerized from the trans to the cis form upon UV irradiation and reverted to the trans form reversibly. The polymer was able to coordinate to platinum, and the resulting polymer complex exhibited the Cotton effect owing to the chirality of the phosphorus atoms. The structure of the P‐chiral polymer obtained could be changed reversibly by light and thermal stimuli, and the polymer chain was induced to rotate helically when complexed with transition metals through the chiral phosphorus atoms.     

Synthesis,surface accumulation,and micellar properties of amphiphilic block copolymers

Amphiphilic block copolymers, i.e., poly(methyl methacrylate)-b-poly(2-dimethylethylammoniumethyl methacrylate), were synthesized by the reaction between two prepolymers. Carboxyl-terminated poly(methyl methacrylate) and hydroxyl-terminated poly(2-dimethylaminoethyl methacrylate) were prepared by radical polymerization of the corresponding monomers in the presence of thioglycolic acid and 2-mercaptoethanol as a chain transfer agent, respectively. Two condensation methods, i.e., DCC and the acid chloride method, were used for the reactions of these prepolymers. The subsequent quarternization produced the amphiphilic block copolymers. Surface property of poly(methyl methacrylate) films containing this amphiphilic block copolymer was examined by measuring contact angles for water. The addition of only 0.5 wt% of the block copolymer was sufficient to make poly(methyl methacrylate) surfaces hydrophilic. The block copolymer formed a polymeric micelle in acetone–water mixed solvent.     

Novel synthesis of heterocyclic spirans by tandem cycloaddition to sulfur-containing heterocumulenes

Novel Ni(C0)₄-promoted tandem cycloadditions of diphenylcyclo- propenone to isothiocyanates and to CS₂ were found to provide new heterocyclic spirans, pyrroline-2-one-5-spiro-5′-thiolene-4′-ones and a thiolene-2-one-5-spiro-5′-thiolene-4′-one, respectively, in moderate yields.     

Guest shape-responsive fitting of porous coordination polymer with shrinkable framework

In situ synchrotron X-ray powder diffraction patterns of porous coordination polymers [[Cu(2)(pzdc)(2)(bpy)].G] have been measured (pzdc = pyrazine-2,3-dicarboxylate, bpy = 4,4'-bipyridine) (where G = H(2)O for CPL-2 superset H(2)()O, G = benzene for CPL-2 superset benzene, and G = void for the apohost). The structures of apohost and CPL-2 superset benzene were determined from Rietveld analysis. Adsorption of benzene in the channels induced a remarkable contraction in the crystal (b axis; 6.8%, volume; 4.9%), although the channels were occupied by the benzene molecules. This crystal transformation provides a new pore structure that is well suited for benzene molecules, and we denote it as a "shape-responsive fitting" transformation. This type of pore gives rise to a new guideline: frameworks can be composed of flexible motifs that are linked via strong bond and/or stiff motifs that are connected via weaker bonds.     

Studies on polyyne polymers containing transition metals in the main chain. VII. Synthesis and characterization of palladium-polyyne polymers

Metal-polyyne polymers consisting of palladium and conjugated acetylenic systems, where P_D and R represent the —Pd(PBu₃)₂—moiety and alkyl groups, respectively, were prepared by polycondensation between palladium chlorides and α,ω-diethynyl compounds in amines using a catalytic amount of cuprous iodide. The molecular weights of the polymers formed were greatly affected by the basicity of the amines and the addition of free phosphines to the polymerization system. Under the optimum conditions, i.e., in the presence of CuI and PBu₃ (in molar ratio 1/4) in piperidine at room temperature, polymer Ia (R¹ = R² = H) having M?_w = 29,000 was obtained.     

Structures and ligand exchange of N-confused porphyrin dimer complexes with group 12 metals

N-confused 5,20-diphenylporphyrin (NCDPP, 1) formed 2:2 dimer complexes with group 12 metals both in the solid state and in solution. X-ray single-crystal analyses of the Zn(II) and Cd(II) complexes (7, 8) revealed that each metal ion is coordinated with three inner core nitrogens and a peripheral nitrogen of the other NCDPP in the pair. In the (1)H NMR spectra of 7, 8, and the Hg(II) complex (9), the outer alpha-H signals of the confused pyrrole ring appeared in the upfield region at 2.57, 3.44, and 3.60 ppm, respectively, due to the ring current effect by the coordinated porphyrins. In the case of the Cd(II) and Hg(II) complexes (8, 9), additional magnetic couplings with the metal nuclei of the partner rings were observed. The equilibrium constants (K) of the monomer exchange reaction at 25 degrees C were determined to be 2.5, 1.3, and 0.6 for the (Zn-Cd), (Cd-Hg), and (Zn-Hg) heterodimer complexes, respectively, from the (1)H NMR spectra of a solution containing two different dimers. Furthermore, a metal-transfer reaction from a Zn(II) NCP dimer complex to the free base porphyrin was demonstrated.     

Biomimetic oxidation of alcohols by coenzyme PQQ-trimethyl ester

Oxidation of alcohols to corresponding carbonyl compounds by coenzyme PQQ-trimethyl ester was performed in the presence of aluminum t-butoxide or aluminum chloride under anaerobic conditions. Reduced PQQTME (PQQTMEH₂) was obtained by acidification of an aluminum complex of reduced PQQTME which was isolated in the reaction.     

Destabilization of whole skin lipid bio-liposomes induced by skin penetration enhancers and FT-IR/ATR (Fourier transform infrared/attenuated total reflection) analysis of stratum corneum lipids.

Whole skin lipid bio-liposomes (skin bio-liposomes), in size ranging from 2 to 8 microns, were prepared by a reverse phase evaporation technique using rat full thickness skin. Leakage of an encapsulated fluorescence probe, ANTS (delta-amino-1,3,6-naphthalene-trisulfonate), was measured by adding transdermal penetration enhancers (penetrants) into the medium where the skin bio-liposomes were present. Oleylamine induced a fast release of ANTS from the liposomes compared to lauryl-amine which showed a weak action. With these penetrants, the degree of ANTS release from the prepared bio-liposomes was found to correlate well with the results of frequency changes in the CH-asymmetric stretching band near 2920 cm-1 in the rat stratum corneum. The penetrant which caused relatively strong leakage of ANTS induced the significantly large shift of the peak toward the higher wave-numbers due to the perturbation in the structure of lipids of the stratum corneum. The skin bio-liposomes prepared from the rat full thickness skin could be useful in evaluating the penetrants.     

Membrane permeation-controlled transdermal delivery system design. Influence of controlling membrane and adhesive on skin permeation of isosorbide dinitrate

A membrane permeation-controlled transdermal delivery system (MC-TDS) of isosorbide dinitrate (ISDN), a model drug, was prepared from polyvinyl alcohol aqueous gel containing the drug, a membrane consisting of ethylene-vinyl acetate copolymer membrane and acrylic adhesive (EV-a). The permeability of ISDN through the EV-a membrane was 2.5 times higher than that through excised hairless rat skin. The ratio of plasma concentration of ISDN after application of MC-TDS on stripped (damaged) skin relative to intact skin was lower than that after application of Frandol tape-S, a marketed ISDN TDS, which suggests that the EV-a membrane might work as a control membrane for overall delivery rate of ISDN to the body. When MC-TDS stored at 30 degrees C for 13.5-48h was applied to the damaged skin, however, the initial plasma concentration of ISDN was very much higher than the expected therapeutic level and was not controlled by the EV-a membrane. The initial high plasma concentration of ISDN after application of the stored MC-TDS on the damaged skin was due to migration of ISDN from the reservoir to the adhesive during storage at 30 degrees C. The migration of drugs into the adhesive might be an important problem in developing efficient MC-TDS.