Adsorption properties of activated carbon from waste newspaper prepared by chemical and physical activation

Adsorption properties of activated carbons prepared from waste newspaper by chemical and physical activation were investigated using water vapor, ammonia, methane, and methylene blue (MB) as adsorbents. The water vapor adsorption isotherms show type V behavior and the maximum vapor adsorption of the chemically and physically activated products is about 1050 and 450 ml/g, respectively. The higher water vapor adsorption of the chemically activated products is attributed to the higher specific surface area (S(BET)) and greater hydrophilic activity (arising from the surface oxygen-containing functional groups) than in the physically activated products. The adsorption of ammonia and methane was measured by temperature-programmed desorption (TPD). NH(3) adsorption is found to be higher in the chemically activated product than in the physically activated product while methane adsorption is slightly higher in the physically activated products even though these have lower S(BET) values. In the MB adsorption, the chemically activated products show higher adsorption (390 mg/g) than the physically activated product. These results are suggested to be related to the surface characteristics.     

Efficient synthesis of (±)-8,14-cedranoxide using electrochemical method as a key step

(±)-8,14-Cedranoxide has been synthesized starting from 3,4-dimethoxyphenol, wherein 6-acetoxymethyl-2,6-dimethyl-9-methoxytricyclo[5.3.1.0^1,5]undec-9-en-8,11-dione as a key intermediate has been produced efficiently by means of electrochemical methods.     

Rapid controlled hydrolytic degradation of poly(l-lactic acid) by blending with poly(aspartic acid-co-l-lactide)

Although poly(lactic acid) is known as a biodegradable polymer, its hydrolytic degradation is extremely slow, taking years in water and in the human body. In this study the effects of blending oligomeric poly(aspartic acid-co-lactide) (PALs) on the hydrolytic degradation of poly(l-lactic acid) (PLLA) were studied in detail. It was found that the addition of PAL did not accelerate the hydrolysis of the PLLA in air (25 °C, 60% relative humidity), but significantly accelerated it in a phosphate buffer solution. The degradation rate becomes higher for the blends containing PAL with higher molar ratios of lactide to aspartic acid units, [LA]/[Asp], when PLLA/PAL blends prepared with different PALs are compared at the same PAL concentration. TEM results, in which the distribution of PALs with higher [LA]/[Asp] occurs at a smaller scale in blends, imply that higher miscibility of the PAL with PLLA results in higher contact area between the components, thereby accelerating the degradation efficiently.     

Heterosubstituted allylic carbanion based stereocontrol,regio- and stereo- selective reaction of O and S substituted allylic carbanions with aldehydes

Regio- and diastereoselective reaction of oxygen and sulfur substituted allylic carbanions with aldehydes is described. Either threo or erythro isomer can be obtained predominantly or exclusively by merely choosing an additive.     

Alternating copolymerization of 1- and 2-vinylnaphthalene with methyl methacrylate by using diethylaluminum chloride

The alternating copolymerization of 1- and 2-vinylnaphthalene (1-VNap and 2-VNap) with methyl methacrylate (MMA) by using diethylaluminum chloride (Et₂AlCl) in toluene at 0°C has been studied. No polymerization could occur without Et₂AlCl, and alternating copolymers were obtained only when an equimolar amount of Et₂AlCl with MMA was supplied. Through ¹H-NMR analyses on both dyad and triad of alternating deuterated 1- and 2-α-d-VNap–MMA copolymers, each configuration could be described successfully by a single parameter, coisotacticity σ, whose value was estimated as 0.41 for the former and 0.56 for the latter copolymer, respectively. A rather low coisotacticity of copoly(1-VNap–MMA) was explained in the terms of steric effect (peri effect) of 1-VNap monomer.     

Photoreaction Cycle of Phoborhodopsin (Sensory Rhodopsin II) from Halobacterium salinarum Expressed in Escherichia coli

Phoborhodopsin (pR; also called sensory rhodopsin II, SRII) is a photoreceptor of negative phototaxis of halobacteria. The studies of photochemical properties of this pigment are not many because the amount of the pigment is small and the stability is low. Recently an expression system of phoborhodopsin from Halobacterium salinarum (called salinarum phoborhodopsin, spR; also HsSRII) in Escherichia coli and purification method has been developed (Mironova et al. [2005] FEBS Lett., 579, 3147–3151), which enables detailed studies on the photochemical properties of spR. In the present work, the photoreaction cycle of E. coli-expressed spR was studied by low-temperature spectroscopy and flash photolysis. Formations of K-, M-, O-like intermediates and P480 were reconfirmed as reported previously. New findings are as follows. (1) The K-like intermediate (P500) was a mixture of two photoproducts. (2) Formation of L-like intermediate (P482) was observed by low-temperature spectroscopy and flash photolysis at room temperature. (3) On long irradiation of spR at 20°C, formation of a new photoproduct P370 was observed and it decayed to the original spR in the dark with a decay half time of 190 min. Based on these results the similarities and dissimilarities between spR and ppR are discussed.     

A level set approach for computing discontinuous solutions of Hamilton-Jacobi equations

We introduce two types of finite difference methods to compute the L-solution and the proper viscosity solution recently proposed by the second author for semi-discontinuous solutions to a class of Hamilton-Jacobi equations. By regarding the graph of the solution as the zero level curve of a continuous function in one dimension higher, we can treat the corresponding level set equation using the viscosity theory introduced by Crandall and Lions. However, we need to pay special attention both analytically and numerically to prevent the zero level curve from overturning so that it can be interpreted as the graph of a function. We demonstrate our Lax-Friedrichs type numerical methods for computing the L-solution using its original level set formulation. In addition, we couple our numerical methods with a singular diffusive term which is essential to computing solutions to a more general class of HJ equations that includes conservation laws. With this singular viscosity, our numerical methods do not require the divergence structure of equations and do apply to more general equations developing shocks other than conservation laws. These numerical methods are generalized to higher order accuracy using weighted ENO local Lax-Friedrichs methods as developed recently by Jiang and Peng. We verify that our numerical solutions approximate the proper viscosity solutions obtained by the second author in a recent Hokkaido University preprint. Finally, since the solution of scalar conservation law equations can be constructed using existing numerical techniques, we use it to verify that our numerical solution approximates the entropy solution.