Inhibitory effects of 3,3',4,5'-tetrahydroxystilbene and 3,3',4,5'-tetrahydroxybibenzyl, the constituents of Cassia garrettiana on antigen-induced histamine release in vitro.

3,3',4,5'-Tetrahydroxystilbene (I) and 3,3',4,5'-tetrahydroxybibenzyl (II), isolated from the heartwood of Cassia garrettiana Craib (Leguminosae), showed inhibitory effects on antigen-induced histamine release from rat peritoneal mast cells in vitro. The inhibitory effect of I (IC50 = 30.2 microM) was much stronger than that of II (greater than 100 microM). Compound II, as well as I (IC50 = 7.3 microM) reported previously, also inhibited the histamine release from human peripheral basophils induced by anti-immunoglobulin E (IgE) in vitro, and its IC50-value was 68.0 microM. These results suggest that the trans-olefin structure in the molecule may be necessary for I to have an inhibitory effect on histamine release. Considering that disodium cromoglycate did not show any significant inhibitory effect on anti-IgE-induced histamine release from human basophils, the strong inhibitory effects of I in both tests are of considerable interest.     

Monte Carlo simulation of spatial distribution of X rays in multifilm targets. III: optimum design as applied to W/Al‐film targets

The brightness of the X‐ray source in a W/Al‐film target used for X‐ray projection microscopy was studied by an approach using the Monte Carlo simulation. Since continuous X rays generated in a thin film have a specific angular distribution of emission, the brightness of the continuous X‐ray source cannot simply be estimated on the assumption that the angular distribution is homogeneous. The newly developed approach using the Monte Carlo simulation enables the evaluation of the effective source size, angular distribution, and brightness of a continuous X‐ray source with sufficient accuracy that it leads to the optimum design of a high‐brightness X‐ray source for uses such as X‐ray projection microscopy. The Monte Carlo calculations were performed for W(Δz)/Al (200 µm)‐film targets with different thicknesses of W film, Δz, under bombardment of 60 kV electrons. The results have suggested an optimum design consisting of a W (2 µm)/Al (200 µm)‐film target as most promising for providing an X‐ray source of higher brightness than the W (5 µm)/Al (200 µm)‐film target, which has already been in practice for X‐ray projection microscopy. Copyright © 2006 John Wiley & Sons, Ltd.     

Preparation and properties of macroreticular resins containing thiazole and thiazoline groups

Three macroreticular polystyrene-based resins with amino- or imino-thiazole and thiazoline groups as the functional groups have been prepared. The resins are highly stable in acid and alkaline solutions and have high selectivity for mercury(II). In the presence of hydrochloric acid, sorption of mercury attains equilibrium fairly rapidly, the time for 50% uptake of mercury being 3-6 min. There are practically no interferences. In a column operation, mercury is quantitatively recovered by elution with 0.1M hydrochloric acid containing 5% thiourea. The thiazoline resin column can be used to concentrate mercury from sea-water.     

Chain-growth polycondensation for well-defined aramide. Synthesis of unprecedented block copolymer containing aramide with low polydispersity

Poly(p-benzamide) with a defined molecular weight and a low polydispersity and a block copolymer containing this well-defined aramide was synthesized. Phenyl 4-aminobenzoate, which would yield poly(p-benzamide), did not polymerize under the conditions of chain-growth polycondensation. However, phenyl 4-(4-octyloxybenzylamino)benzoate (1b) polymerized at room temperature in the presence of base and phenyl 4-nitrobenzoate (2) as an initiator in a chain-growth polycondensation manner to give well-defined aromatic polyamides having the 4-octyloxybenzyl groups as a protecting group on nitrogen in an amide. It was confirmed by a model reaction that deprotection of this protecting group proceeded completely with trifluoroacetic acid (TFA) without breaking the amide linkage. The utility of this approach to poly(p-benzamide) with a low polydispersity was demonstrated by the synthesis of block copolymers. Thus, phenyl 4-(octylamino)benzoate (1a) polymerized in the presence of 2 and base, followed by addition of 1b and base to the reaction mixture of the prepolymer to yield the block copolymer of 1a and 1b with a controlled molecular weight and a low polydispersity. The block copolymer was treated with TFA, resulting in a soluble block copolymer of poly(N-octyl-p-benzamide) and poly(p-benzamide). The SEM images of the supramolecular assemblies of the block copolymer showed mum-sized bundles and aggregates of flake structures.     

Highly sensitive spectrophotometric determination of osmium(VIII) with pyrogallolphthalein and hydrogen peroxide in the presence of Brij 35

Summary A highly sensitive determination of osmium(VIII) is based on the decolouring reaction with pyrogallolphthalein (gallein) and hydrogen peroxide in the presence of Brij 35. Beer's law was obeyed in the range of 0–0.5 ng of osmium(VIII) per 10 ml and the apparent decomposed absorption coefficient was 2.5×10⁹ l mol^–1 cm^–1 at 535 nm.Application of xanthene derivatives in analytical chemistry. Part XCIII. Part XCII see ref. [1]     

Preparation and analytical properties of a chelating resin containing phenylalanine groups

A polystyrene-based macroreticular resin containing phenylalanine groups has been prepared and its analytical properties have been investigated and compared with Dowex A-1. The phenylalanine resin shows high selectivity for mercury(II) and copper(II) in the pH region 2-3. The sorption behaviour of copper has been examined in detail, with the intention of using the resin analytically. The important characteristics of the resin are fast equilibration, high selectivity and small volume change between its hydrogen form and metal forms. These enable it to be applied for the rapid concentration of trace amounts of copper in the presence of large amounts of diverse metals. It may be used for the determination of copper in sea-water and the separation of copper/cobalt and copper/nickel.     

Excitation-energy migration in self-assembled cyclic zinc(II)-porphyrin arrays: a close mimicry of a natural light-harvesting system

The excitation-energy-hopping (EEH) times within two-dimensional cyclic zinc(II)-porphyrin arrays 5 and 6, which were prepared by intermolecular coordination and ring-closing metathesis reaction of olefins, were deduced by modeling the EEH process based on the anisotropy depolarization as well as the exciton-exciton annihilation dynamics. Assuming the number of energy-hopping sites N = 5 and 6, the two different experimental observables, that is, anisotropy depolarization and exciton-excition annihilation times, consistently give the EEH times of 8.0 +/- 0.5 and 5.3 +/- 0.6 ps through the 1,3-phenylene linkages of 5 and 6, respectively. Accordingly, the self-assembled cyclic porphyrin arrays have proven to be well-defined two-dimensional models for natural light-harvesting complexes.     

Nucleophilic additions of arylzinc compounds to aldehydes mediated by CrCl(3): efficient and facile synthesis of functionalized benzhydrols, 1(3H)-isobenzofuranones, benzyl alcohols, or diaryl ketones

In the presence of a stoichiometric amount of CrCl(3) and trimethylchlorosilane (TMSCl), nucleophilic addition of arylzinc compounds 1c-h to arylaldehydes 2a,b,g smoothly proceeded at room temperature to yield corresponding benzhydrols 4a-f in good yields. From arylzinc compounds 1a,b, 3-aryl-1(3H)-isobenzofuranones 3a-f were given by the CrCl(3)-mediated reaction with arylaldehydes 2a-f. Diaryl ketones 5a-e were obtained in good yields by the addition of excess amount of benzaldehyde as an oxidant to the resulting solution after the CrCl(3)-mediated reaction between arylzinc compounds 1c-g and arylaldehydes 2b,g was completed. In the nucleophilic additions of arylzinc compounds 1a,d,f to alkyladehydes 6b-f, the treatment of arylzinc compounds with CrCl(3) was required prior to the addition of the aldehydes in order to prevent the fast protodezincation of arylzinc compounds by the enolizable aldehydes. In these CrCl(3)-mediated nucleophilic additions of arylzinc compounds to aldehydes, arylchromium(III) species are probably reactive intermediates.     

α- and γ-Regiocontrol and Enantiospecificity in the Copper-Catalyzed Substitution Reaction of Propargylic Phosphates with Grignard Reagents

The regioselectivity (r.s.) and enantiospecificity (e.s.) of the substitution reactions of secondary propargylic alcohol derivatives using reagents derived from ArMgBr and Cu salts were studied. First, the picolinate, 3-methylpicolinate, and diethylphosphonate derivatives of Ph(CH₂)₂CH(OH)C≡CTMS were reacted with PhMgBr/CuCN in ratios of 2.5:2.7–2.5:0.25. The use of 2.5:0.25 ratio in THF/DME (6:1) at 0 °C for 1 h afforded the α-substitution product from the phosphate with ≥98 % r.s. and 99 % e.s. CuBr⋅Me₂S gave similar selectivity. The reaction system was then applied to phosphates derived from R¹CH(OH)C≡CR² and ArMgBr to obtain synthetically sufficient r.s. and e.s. values with R²=TMS, Ph, whereas iPr was borderline in terms of size as an R¹ substituent. The presence of a substituent at the o-position of Ar marginally affected the selectivity. We also found that the use of PhMgBr/Cu(acac)₂ in a 2:1 ratio in THF produced the γ-substitution products (allenes) with high r.s. and e.s.